Documents for Public Enquiry (DSS)
You can use the search function to look up SABS Documents for Public Enquiry (DSS)
| Standard Number | Title | Scope and Purpose | Closing Date | Download |
|---|---|---|---|---|
| SANS 10019:20XX Ed 9.3 | Transportable pressure receptacles for compressed, dissolved and liquefied gases — Basic design, manufacture, use and maintenance | Amended to update the foreword, the clauses on design and manufacturing requirements, valves, marking, labelling, colour coding and certificates, handling, storage, transport and use, the annexes on list of acceptable manufacturing standards for gas pressure receptacles, frequency of inspections and tests for pressure receptacles, and on SCUBA and SCBA cylinder requirements, and referenced standards. | 2026-12-29 | |
| SANS 10286:20xx Ed 2 | Safe Management of Residue Facilities | This standard specifies the requirements for the safe design, operation, monitoring, decommissioning and closure, management and governance of residue facilities.This standard does not cover stockpiles, overburden dumps or waste rock dumps, however some similar design principles and management aspects may apply.NOTE 1 Residue is the broad term used to define post-processing waste arising from the extraction of metals and minerals from an orebody, and in the case of ash, the residue from burning of coal for power generation.NOTE 2 The residue quantities produced are large and often in slurry form requiring dams for storage, which pose a risk to communities, infrastructure, and the environment if not properly managed.NOTE 3 The term "tailings" is used solely in the GISTM. Where "tailings" has been used in this standard it can be interpreted to mean "residue" to accommodate the broader application to ash, rejects, discards, slag, gypsum and slimes. | 2026-12-05 | |
| SANS 10968: XXXXX Ed 3 | Earth-moving machinery - Operator's controls | Specifies requirements and guidelines for the operator¿s controls on earth-moving machinery as defined in ISO 6165, in as far as those controls relate to any direct-control machine | 2026-12-08 | |
| SANS 1097:20xx Ed 4.1 | Dimensional changes in textile fabrics caused by immersion in cold water | Amended to delete the annex on notes to purchasers. | 2027-01-05 | |
| SANS 11258:20xx Ed 2 | Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization | Specifies a method to provide a relative measure for evaluating the extent to and ease to which oxygen can be removed from iron ores, when reduced under conditions resembling those prevailing in shaft direct-reduction processes. | 2026-12-08 | |
| SANS 11378-2:20XX Ed 2 | Textile floor coverings — Laboratory soiling Part 2: Drum test | Specifies the test method for assessing the propensity of textile floor coverings to soiling in the absence of abrasive wear and texture changes using a standard artificial soil composition. | 2026-12-29 | |
| SANS 11641:20xx Ed 2 | Leather - Tests for colour fastness - Colour fastness to perspiration | Specifies a method for determining the colour fastness to perspiration of leather of all kinds at all stages of processing. | 2026-12-29 | |
| SANS 11930:20xx Ed 1 | Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product | Specifies a procedure for the interpretation of data generated by the preservation efficacy test or by the microbiological risk assessment, or both, when evaluating the overall antimicrobial protection of a cosmetic product. | 2026-12-29 | |
| SANS 12215-5:20xx Ed 2 | Small craft - Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination | Defines the dimensions, design local pressures, mechanical properties and design stresses for the scantlings determination of monohull small craft with a hull length (LH) or a load line length (see NOTE 1) of up to 24 m. | 2027-01-05 | |
| SANS 1247-1:20xx Ed 1 | Aluminium pigments for paints Part 1: General aluminum pigments | Specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including general, decorative and protective paints, and special finishing paints. | 2027-01-05 | |
| SANS 1247-2:20xx Ed 1 | Aluminum pigments for paints Part 2: Vacuum metallized aluminum pigments | Specifies the requirements and corresponding test methods for vacuum metallized aluminium pigments (VMP) suitable for use in paints and printing ink industries. | 2027-01-05 | |
| SANS 1253:20xx Ed3.2 | Fire-doors and fire-shutters | Amended to update the subclauses on observations and acceptable variation and to delete the annex on notes to purchasers. | 2027-01-05 | |
| SANS 1288:XXXX Ed 5 | Preservative-treated timber | Specifies preservative treatment requirements (other than the method of treatment) for preservative-treated timber and timber products (other than for composite board products), that have an expected service life at various levels of preservative treatment which are considered to be acceptable for a range of hazard conditions. | 2026-12-29 | |
| SANS 12951:20xx Ed 2 | Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine | Specifies four methods of test for textile floor coverings (with or without an underlay), using the Lisson Tretrad machine. | 2026-12-29 | |
| SANS 13611:20xx Ed 2 | Interpreting services - Community interpreting - Requirements and recommendations | Specifies requirements and recommendations for the provision of community interpreting services. | 2026-12-08 | |
| SANS 13909-1:20XX Ed 3 | Coal and coke - Mechanical sampling - Part 2: Sampling of coal from moving streams | Specifies procedures and requirements for the design and establishment of mechanical samplers for the sampling of coal from moving streams and describes the methods of sampling used. | 2026-12-29 | |
| SANS 13909-2:20XX Ed 3 | Coal and coke - Mechanical sampling - Part 2: Sampling of coal from moving streams | Specifies procedures and requirements for the design and establishment of mechanical samplers for the sampling of coal from moving streams and describes the methods of sampling used. | 2026-12-29 | |
| SANS 13909-3:20XX Ed 3 | Coal and coke - Mechanical sampling Part 3: Sampling of coal from stationary lots | This document specifies procedures for the mechanical sampling of coal from stationary lots, for example, from wagons, barges, ships and stockpiles. These procedures are to be used when it is not possible to sample the lots during loading or discharge according to ISO 13909-2. Procedures for sample preparation are given in ISO 13909-4. This document is applicable to mechanical sampling from stationary coal lots, to obtain samples from which test samples for the determination of moisture, and for general analysis including physical and chemical tests, can be prepared in accordance with the requirements and recommendations set out in ISO 13909-4. In this document, the principles and procedures for designing a sampling scheme are given, together with typical examples of applications; in addition, practices for the execution of sampling in different sampling situations are described. The methods described are limited to those on which it is possible to conduct a test for bias. | 2026-12-29 | |
| SANS 13909-4:20xx Ed 3 | Coal and coke - Mechanical sampling Part 4: Preparation of test samples of coal | Describes the preparation of samples of coal from the combination of primary increments to the preparation of samples for specific tests. | 2026-12-29 | |
| SANS 13909-5:20xx Ed 3 | Coal and coke - Mechanical sampling - Part 5: Sampling of coke from moving streams | Specifies procedures and requirements for the design and establishment of sampling schemes for the mechanical sampling of coke from moving streams and the methods of sampling used. | 2026-12-29 | |
| SANS 13909-6:20xx Ed 3 | Coal and coke - Mechanical sampling Part 6: Coke - Preparation of test samples | Describes the preparation of samples of coke from the combination of primary increments to the preparation of samples for specific tests. | 2026-12-29 | |
| SANS 13909-7:20xx Ed 3 | Coal and coke - Mechanical sampling Part 7: Methods for determining the precision of sampling, sample preparation and testing | Defines methods for estimating overall precision and for deriving values for primary increment variance which can be used to modify the sampling scheme to change the precision. | 2026-12-29 | |
| SANS 13909-8:20xx Ed 3 | Coal and coke - Mechanical sampling Part 8: Methods of testing for bias | Sets out principles and procedures for testing the bias of test samples of coals or cokes, taken according to the ISO 13909 series. | 2026-12-29 | |
| SANS 14002-3:20xx Ed 1 | Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area Part 3: Climate | Gives guidance to organizations on addressing climate-related environmental aspects, environmantal conditions,and the associated risks and opportunities within an environmental management systems. | 2026-12-29 | |
| SANS 1452:20XX Ed 2 | Lighting and optics overhead projectors | Specification covers overhead projectors for the projection by transmitted light of images on a transparent medium. | 2026-12-29 | |
| SANS 1452:20XX Ed 2 | Lighting and optics overhead projectors | Covers overhead projectors for the projection by transmitted light of images on a transparent medium. Does not cover those parts of the projector such as switches, connectors and cables, that are covered by applicable compulsory specifications. Specifies design, construction, electrical and general safety, picture projection and limitation of noise. | 2026-12-08 | |
| SANS 147:20XX Ed 2 | Carpets - Determination of number of tufts and/or loops per unit length and per unit area | Specifies a method for the determination of the number of tufts or loops (or both) per unit length and per unit area of a carpet, and applies to carpets the pile of which consists of uniformly spaced tufts or loops (or both). | 2026-12-08 | |
| SANS 15027-1:XXXX Ed 1 | Immersion suits - Part 1 Safety and performance requirements for constant wear suits | Specifies performance and safety requirements for constant wear suits and suit systems for professional and leisure activities to protect the user against the effects of cold-water immersion, by reducing cold shock and delaying the onset of hypothermia. | 2026-12-08 | |
| SANS 15027-2:XXXX Ed 1 | Immersion suits - Part 2: Safety and performance requirements for abandonment suits | Specifies performance and safety requirements for abandonment suits and suit systems in emergency situations for professional and leisure activities to protect the user against the effects of cold-water immersion, by reducing cold shock and delaying the onset of hypothermia. | 2026-12-08 | |
| SANS 15027-3:XXXX Ed 1 | Immersion suits - part 3: test methods | Specifies the test methods for constant wear suits and abandonment suits. | 2026-12-08 | |
| SANS 15213-2:202X Ed 1 | Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp | Part 2: Enumeration of Clostridium perfringens by colony-count technique. This document specifies the enumeration of Clostridium (C.) perfringens by colony-count technique.This document is applicable to: products intended for human consumption; products for feeding animals;environmental samples in the area of food and feed production and handling;samples from the primary production stage.NOTE This method has been validated in an interlaboratory study for the following food categories:ready-to-eat, ready-to-reheat meat products;eggs and egg products (derivates);processed fruits and vegetables;infant formula and infant cereals;multi-component foods or meal components.it has also been validated for the following other categories:pet food and animal | 2027-01-05 | |
| SANS 15408-2:20xx Ed4 | Information security, cybersecurity and privacy protection - Evaluation criteria for IT security Part 2: Security functional components | Specifies requirements for the required structure and content of security functional components for use during a security evaluation. | 2027-01-05 | |
| SANS 15408-3:20xx Ed4 | Information security, cybersecurity and privacy protection - Evaluation criteria for IT security Part 3: Security assurance components | Specifies the security assurance requirements of the ISO/IEC 15408 series. | 2027-01-05 | |
| SANS 15585:XXXX Ed 2 | Hard coal — Determination of caking index | specifies a method of determination of caking index of hard coal. It is applicable to the evaluation of caking power of bituminous coal with random reflectance of vitrinite, Rr, greater than 0,6 % and less than or equal to 1,8 % (>0,6 % and =1,8 %). | 2026-12-29 | |
| SANS 15708-1:20xx Ed 2 | Non-destructive testing - Radiation methods for computed tomography - Part 1: Vocabulary | Defines terms used in the field of computed tomography (CT). | 2026-12-08 | |
| SANS 15708-2:20xx Ed 2 | Non-destructive testing - Radiation methods for computed tomography - Part 2: Principles, equipment and samples | Specifies the general principles of X-ray computed tomography(CT), the equipment used and basic considerations of sample, materials and geometry. | 2026-12-08 | |
| SANS 16063-21:2008 Ed 1 and ISO tech. corr. 1, amdt 1, 2 | Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer | Amended to update the introduction, scope, and the clause on requirements for apparatus and environmental conditions. | 2027-01-05 | |
| SANS 16063-31:20xx Ed 1 and ISO amdt 1 | Medical gloves for single use - Part 1: Requirements and testing for freedom from holes. | Amended to update the clause on determination of the transverse sensitivity using a tri-axial vibration generator and to add annex on testing of transverse sensitivity using elliptical orbits. | 2027-01-05 | |
| SANS 16073-1:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 1: General | Specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) covering the torso, neck, arms, hands, legs, feet, head, eyes and hearing that is used for wildland firefighting. | 2026-12-29 | |
| SANS 16073-2:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methodsPart 2: Compatibility | Specifies the minimum performance requirements and test methods for assessing compatibility of wildland firefighters' personal protective equipment (PPE). | 2026-12-29 | |
| SANS 16073-3:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 3: Clothing | Specifies test methods and minimum performance requirements for personal protective clothing, designed to protect the wearers body, except for the head, hands, and feet, that is worn during wildland firefighting and associated activities. | 2026-12-29 | |
| SANS 16073-4:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 4: Gloves | Specifies the minimum performance requirements and methods of test for personal protective equipment (PPE), gloves, that cover the hands whilst wildland firefighting. | 2026-12-29 | |
| SANS 16073-5:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 5: Helmets | Specifies the minimum performance requirements and methods of test for helmets used for wildland firefighting. | 2026-12-29 | |
| SANS 16073-6:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 6: Footwear | Covers the general design, minimum performance requirements and methods of test for wildland firefighting footwear. | 2026-12-29 | |
| SANS 16073-7:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 7: Face and eye protection | Specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) face and eye protection, for wildland firefighting. | 2026-12-29 | |
| SANS 16073-8:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 8: Hearing | Specifies the minimum performance requirements and methods of test for hearing protection used when wildland firefighting. | 2026-12-29 | |
| SANS 16073-9:20xx Ed 1 | Wildland firefighting personal protective equipment - Requirements and test methods Part 9: Firehoods | Specifies the minimum performance requirements and methods of test for firehoods that cover the head and neck and are used for wildland firefighting. | 2026-12-29 | |
| SANS 16111:20xx Ed 1 | Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride | Defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as "metal hydride assemblies" (MH assemblies) which utilize shells not exceeding 150 l internal volume and having a maximum developed pressure (MDP) not exceeding 25 MPa. | 2026-12-29 | |
| SANS 16368:202X Ed 3 | Mobile elevating work platforms - Design calculations, safety requirements and test methods | This document specifies safety requirements and protective/risk reduction measures, and the means for their verification, for all types and sizes of mobile elevating work platforms (MEWPs) intended for moving a person(s) along with their necessary tools and materials at an elevated work location.This document also applies to MEWPs designed for applications requiring special access to specific work areas. These MEWPs can be either self-propelled or manually propelled and are used to elevate personnel to a level at which they can place, install, or retrieve objects or material on a routine basis. To facilitate operator access to the work area, the retraction of a portion of the MEWP's work platform guardrail system(s) can be necessary.This document is intended to serve as a guide for manufacturers and remanufacturers of MEWPs to achieve the following objectives:- elimination or reduction of accidents and personal injuries;- establishment of criteria for design, manufacture, remanufacture, rebuild/recondition, testing and performance;- establishment and understanding by manufacturers and remanufacturers of their responsibilities. The design and manufacturing requirements of this document apply to all MEWPs manufactured or remanufactured on or after the effective date, but it is not applicable to rebuilt or reconditioned MEWPs.It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards. | 2026-12-29 | |
| SANS 16520:202x Ed 1 | Tourism and related services - Restaurants and catering – Vocabulary | Defines terms used in the tourism industry in the field of restaurants and catering. | 2026-12-08 | |
| SANS 1676-2:20xx Ed 2 | Acoustics - Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation | Specifies a laboratory method for measuring the airborne sound insulation of building products, such as walls, floors, doors, windows, shutters, façade elements, façades, glazing, small technical elements, for instance transfer air devices, airing panels (ventilation panels), outdoor air intakes, electrical raceways, transit sealing systems and combinations, for example walls or floors with linings, suspended ceilings or floating floors. | 2026-12-29 | |
| SANS 1676-4:20xx Ed 2 | Acoustics - Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements | Specifies the basic measurement procedures for airborne and impact sound insulation of building elements in laboratory test facilities. | 2026-12-29 | |
| SANS 16923:20xx Ed 2 | Natural gas fuelling stations — Compressed natural gas (CNG) stations for fuelling vehicles | Specifies requirements for the design, construction, operation, maintenance and inspection of stations for fuelling compressed natural gas (CNG) to vehicles, including equipment, safety and control devices up to the fuelling nozzle to the vehicle. | 2026-12-29 | |
| SANS 17236:20XX Ed 2 | Leather - Physical and mechanical tests - Determination of extension set | Specifies a method for determining the extension set of leather. It is intended for use on upholstery leather but is applicable to all flexible leathers. | 2026-12-29 | |
| SANS 17268-1:20xx Ed 1 | Gaseous hydrogen land vehicle refuelling connection devices Part 1: Flow capacities up to and including 120 g/s | Specifies the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors. | 2026-12-29 | |
| SANS 17577:20xx Ed 2 | Steel - Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm | Specifies a method for the automated and/or manual ultrasonic testing of uncoated steel flat products for internal discontinuities by the pulse echo technique. | 2026-12-08 | |
| SANS 18060:202x Ed 1 | Sustainable tourism - Indicators for organizations in the tourism value chain - Requirements and guidance for use | Defines and establishes methodologies for a set of indicators to steer and measure the performance of organizations in terms of sustainability | 2026-12-08 | |
| SANS 1845:20XX Ed 1.2 | Prefinished sheet metal products for interior and exterior building applications | Amended to delete annex notes to purchasers | 2026-12-29 | |
| SANS 1869:20XX Ed 2.1 | Chrome-tanned bend outer sole leather. | Amended to delete Annex A note to purchasers | 2027-01-05 | |
| SANS 1873:XXXX Ed 2.1 | Vegetable-tanned bend outer sole leather | Amended to delete the annex on notes to purchasers. | 2027-01-05 | |
| SANS 19168-1:XXXX Ed 1 | Geographic Information - Geospatial API for features - Part 1: Core | It specifies the behaviour of Web APIs that provides access to features in a dataset independently of the underlying data store. | 2026-12-08 | |
| SANS 19178-1:XXXX Ed 1 | Geographic Information - Training data markup language for artificial intelligence - Part 1: Conceptual model | It provides detailed metadata for formalizing the information model of training data. | 2026-12-08 | |
| SANS 19880-2:20xx Ed 1 | Gaseous hydrogen - Fuelling stations Part 2: Dispensers and dispensing systems | Specifies safety requirements and test methods for the components and systems that enable the transfer of compressed hydrogen to a hydrogen vehicle, as addressed in ISO 19880-1, by a hydrogen dispenser with dispensing pressures up to the H70 pressure class designation. | 2026-12-29 | |
| SANS 19880-3:20xx Ed 1 | Gaseous hydrogen - Fuelling stations Part 3: Valves | Provides the requirements and test methods for the safety performance of high pressure gas valves that are used in gaseous hydrogen stations of up to the H70 designation. | 2026-12-29 | |
| SANS 19887-1:20xx Ed 1 | Gaseous Hydrogen - Fuel system components for hydrogen-fuelled vehicles Part 1: Land vehicles | Establishes requirements for newly produced compressed hydrogen gas fuel system components. | 2026-12-29 | |
| SANS 2026-4:20xx Ed 1 | Artificial intelligence — Data quality for analytics and machine learning (ML) Part 4:Data quality process framework | Defines a standardised process framework to manage data quality in analytics and machine learning (ML). | 2026-12-29 | |
| SANS 2036:20XX Ed 1 | Good research management practice – Requirements | specifies the requirements to be met by organisations, of any type, size and complexity that undertake research activities to demonstrate good research management practice (GRMP) | 2026-12-29 | |
| SANS 20388:202X Ed 1 | Biotechnology - Biobanking -Requirements for animal biological material | Specifies requirements for the collection, reception, preparation, preservation, transport, storage, distribution, destruction and disposal of biological materials obtained from animals, excluding humans. Such resources include solid tissues, fluid samples and associated cells, excretory products and associated data. | 2027-01-05 | |
| SANS 21420:XXXX Ed 1 | Protective gloves - General requirements and test methods | This document specifies the general requirements and relevant test procedures for glove design and construction, innocuousness, comfort and efficiency, as well as the marking and information supplied by the manufacturer applicable to all protective gloves. It can also apply to arm protectors and gloves permanently incorporated in containment enclosures. Gloves and hand protectors such as mittens, pot holders and arm protection are covered by this document. | 2026-12-29 | |
| SANS 21899:20xx Ed 1 | Biotechnology - Biobanking - General requirements for the validation and verification of processing methods for biological material in biobanks | This document is intended for use in the implementation and validation of processing methods for biological materials.This document covers method validation and verification for the production of all biological materials. This document does not apply to biological material intended for food/feed production, laboratories undertaking food/feed analysis, and/or therapeutic use. Reference material production is not covered in this document. For the production requirements for reference materials, see ISO 17034. | 2026-12-08 | |
| SANS 22434:20xx Ed 3 | Gas cylinders - Inspection and maintenance of valves | Specifies requirements for the inspection and maintenance of valves [including ball valves and valves with integrated pressure regulator (VIPRs)] for refillable transportable gas cylinders; cylinder bundles; pressure drums and tubes which convey compressed, liquefied or dissolved gases. | 2027-01-05 | |
| SANS 22734-1:20xx Ed 1 | Hydrogen generators using water electrolysis Part 1: Safety | Specifies the safety requirements of hydrogen gas generation appliances or systems that use electrochemical reactions to electrolyse water to produce hydrogen, herein referred to as hydrogen generators. | 2026-12-29 | |
| SANS 227:20XX Ed 4.6 | Burnt clay masonry units | Amended to delete the note that cross references the deleted appendix B and to update the clause on requirements. | 2026-12-08 | |
| SANS 22:XXXX Ed 2.4 | Glazed ceramic wall tiles and fittings | Amended to delete the appendix on notes to purchasers. | 2026-12-08 | |
| SANS 23279:20xx Ed 2 | Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds | Defines a procedure for classifying internal indications as planar or non-planar. | 2026-12-08 | |
| SANS 24078:20xx Ed 1 | Hydrogen in energy systems – Vocabulary | Establishes the terms, definitions, symbols and abbreviations used in the fields related to hydrogen in energy systems. | 2026-12-08 | |
| SANS 2424:XXXX Ed 2 | Textile floor coverings – Vocabulary | Defines terms relating to textile floor coverings and categories of these products. | 2026-12-08 | |
| SANS 24495-3:202x Ed 1 | Plain language Part 3: Science writing | Establishes governing principles and guidelines for plain science writing | 2026-12-08 | |
| SANS 2532:20XX Ed 1 | Standard Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower Intended for Human/Animal Use | 1.1 This specification covers the recommended range of aw suitable for safe and efficacious storage of cannabis flowers or portions thereof. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. | 2026-12-08 | |
| SANS 2532:20XX_Ed 1 | Standard specification for maintaining acceptable water activity (aw) range (0.55 to 0.65) for dry cannabis flower intended forhuman/animal use | 1.1 This specificaztion covers the recommended range of aw Suitable for safe and efficacious storage of cannabis flowers or portions thereof.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee. | 2026-12-29 | |
| SANS 2612:20XX Ed 1 | Essential oil of Helichrysum odoratissimum (L.) Sweet (Imphepho/Impepho) | This standard specifies requirements, sampling, and test methods for Helichrysum odoratissimum (Imphepho/Impepho) leaf and stem oil suitable for cosmetic use. It also applies to steam distilled essential oil of Helichrysum odoratissimum used in cosmetics and personal hygiene products. | 2026-12-08 | |
| SANS 26142:20xx Ed 1 | Hydrogen detection apparatus - Stationary applications | Defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications. | 2026-12-29 | |
| SANS 2616:20xx Ed 2 | Gas welding equipment — Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor | Specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air incorporating a flame (flashback) arrestor used downstream of manifold, cylinder and/or pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. | 2026-12-29 | |
| SANS 28927-8:20xx Ed1 and ISO amdt 1, 2 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8 | Amended to update the clauses on terms, definitions and symbols, on description of the family of machines, on characterization of vibration, and on testing and operating conditions of the machinery. | 2027-01-05 | |
| SANS 3001-AG20:20xx Ed1.2 | Civil engineering test methods Part AG20: Determination of the bulk density, apparent density and water absorption of aggregate particles retained on the 5 mm sieve for road construction materials | Amended to update refenced standards, the introduction, the clauses on apparatus, procedure, and calculations, to include tables on water classification and quality requirements, on density versus water temperature, and to renumber the tables accordingly. | 2027-01-05 | |
| SANS 3452-2:XXXX Ed 3 | Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials | Specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. Also details on-site control tests and methods. | 2026-12-29 | |
| SANS 3758:20XX Ed 2 | Textiles — Care labelling code using symbols | This document establishes a system of graphic symbols, intended for use in the marking of textile articles, and for providing information on the most severe treatments that do not cause irreversible damage to the article during the textile care process, and specifies the use of these symbols in care labelling.This document is applicable to all textile articles, except:non-removable covers of upholstered furniture; non-removable covers of mattresses;carpets and rugs which require professional carpet cleaning. | 2026-12-29 | |
| SANS 39004:XXXXX Ed 1 | Road traffic safety - Good practice for service providers using digital platform | Provides good practice that can be adopted by any service provider, not limited to e-hailing and p-hailing operators, for the implementation of work-related road traffic safety (RTS) management. | 2027-01-05 | |
| SANS 39:20xx Ed 3 | Small medical gas cylinders - Pin-index yoke-type valve connections | Applies to pin-index yoke-type valve connections for medical gas cylinders, with a working pressure up to a maximum of 200 bar or test pressure up to a maximum of 300 bar, or both. | 2026-12-08 | |
| SANS 50295-2:XXXXXX Ed 2 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling | Specifies requirements for testing of products manufactured from vitrified clay and other materials specified in the following standards: ? pipes, fittings and joints according to EN 295-1; ? adaptors, connectors and flexible couplings according to EN 295-4; ? perforated pipes and fittings according to EN 295-5; ? components of manholes and inspection chambers according to EN 295-6; ? pipes and joints for pipe jacking according to EN 295-7. | 2026-12-08 | |
| SANS 50295-3:20xx Ed 2 | Vitrified clay pipe systems for drains and sewers - Part 3: Test methods | Specifies requirements for testing of products manufactured from vitrified clay and other materials specified in the following standards: pipes, fittings and joints according to EN 295-1(published in South Africa as an identical adoption under the designation SANS 50295-1); adaptors, connectors and flexible couplings according to EN 295-4; perforated pipes and fittings according to EN 295-5; components of manholes and inspection chambers according to EN 295-6; and pipes and joints for pipe jacking according to EN 295-7. | 2026-12-08 | |
| SANS 50354:XXXX Ed 3 | Personal protective equipment – Lanyards | This standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for lanyards. Lanyards conforming to this European Standard are used as connecting elements or components in personal fall protection systems (i.e. restraint systems, work positioning systems, rope access systems, fall arrest systems and rescue systems). | 2026-12-08 | |
| SANS 50455-1:20xx Ed 2 | Medical gloves for single use - Part 1: Requirements and testing for freedom from holes | Specifies requirements and gives the test method for medical gloves for single use in order to determine freedom from holes. | 2027-01-05 | |
| SANS 50455-2:20xx Ed 2 | Medical gloves for single use Part 2 - Requirements and testing for physical properties | Specifies requirements and gives test methods for physical properties of single-use medical gloves (i.e. surgical gloves and examination/procedure gloves) in order to ensure that they provide and maintain in use an adequate level of protection from cross contamination for both patient and user. | 2027-01-05 | |
| SANS 50455-3:20xx Ed 2 | Medical gloves for single use Part 3: Requirements and testing for biological evaluation | Specifies requirements for the evaluation of biological safety for medical gloves for single use. | 2027-01-05 | |
| SANS 5060:202x Ed 1 | Translation services - Evaluation of translation output - General guidance | Specifies requirements and recommendations for the design of permanent booths for simultaneous interpreting in new or existing buildings | 2026-12-08 | |
| SANS 50892:20xx Ed 3 | Mountaineering equipment — Dynamic mountaineering ropes — Safety requirements and test methods | This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing. | 2026-12-08 | |
| SANS 534-3:20XX Ed 2.2 | Vehicle security - Whole-of-vehicle marking Part 3: Microdot systems - Fitment under OEM control | Amended to update the subclause on return of microdot system components. | 2026-12-29 | |
| SANS 553-3:20xx Ed 2 | Inflatable boats Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater | Specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats (including rigid inflatable boats) less than 8 m in overall length with a minimum buoyancy of 1 800 N. Is applicable to type VII and type VIII inflatable boats. Excludes single-chambered boats and boats made from unsupported materials. Is not applicable to aquatic toys and inflatable liferafts. | 2026-12-08 | |
| SANS 560:20xx Ed 5 | Small craft - Permanently installed fuel systems | Specifies the requirements for the design, materials, construction, installation and testing of permanently installed fuel systems as installed for internal combustion engines. | 2027-01-05 | |
| SANS 569:202X Ed 1.1 | Open-sided passenger vehicles. | Amended to update the note on tracker seat, and to delete the annex on notes to purchasers. | 2027-01-05 | |
| SANS 587:20xx Ed 3.4 | Canned fish, canned marine molluscs and canned crustaceans, and products derived therefrom | Amended to update referenced standards, and the subclause on true description of the canned fishery product. | 2026-12-29 | |
| SANS 60050-471:XXXX Ed 1 | International Electrotechnical Vocabulary (IEV) - Part 471: Insulators | Gives the general terminology used in insulators. This terminology is consistent with the terminology developed in the other specialized parts of the IEV. | 2026-12-08 | |
| SANS 60059:20xx Ed 1 | IEC standard current rating | Specifies standard current ratings for electrical devices, apparatus, instruments and equipment. | 2026-12-29 | |
| SANS 60060-1:20xx Ed 3 | High-voltage test techniques - Part 1: General terminology and test requirements | Applies to dielectric tests with direct voltage, dielectric tests with alternating voltage, dielectric tests with impulse voltage, and dielectric tests with combinations of the above. | 2026-12-08 | |
| SANS 60060-2:20xx Ed 3 | High-voltage test techniques Part 2: Measuring systems | Applies to complete measuring systems and to their components, used for the measurement of high voltages during laboratory and factory tests with direct voltage, alternating voltage and lightning and switching impulse voltages and combined and composite voltages as specified in IEC 60060-1. | 2026-12-08 | |
| SANS 60079-0:20XX Ed 7 | Explosive atmospheres Part 0: Equipment - General requirements | Specifies the general requirements for construction, testing and marking of Ex Equipment and Ex Components intended for use in explosive atmospheres. | 2026-12-08 | |
| SANS 60079-10-2:20xx Ed 3 | Explosive atmospheres Part 10-2: Classification of areas - Combustible dust atmospheres | Concerns the identification and classification of areas where explosive dust atmospheres and combustible dust layers are present, in order to permit the proper assessment of ignition sources in such areas. | 2026-12-08 | |
| SANS 60079-28:20xx Ed 3 | Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation | Specifies the requirements, testing and marking of equipment emitting optical radiation intended for use in explosive atmospheres. | 2027-01-05 | |
| SANS 60079-29-0:20xx Ed 1 | Explosive atmospheres - Part 29-0: Gas detection equipment - General requirements and test methods | Specifies general requirements, test methods and acceptance criteria that apply to flammable, oxygen and toxic gas detection equipment intended to detect gases and vapours and to provide an indication, alarm or other output function for personnel or property protection in industrial and commercial applications. | 2026-12-08 | |
| SANS 60079-30-1:20xx Ed 3 | Explosive atmospheres Part 30-1: Electrical resistance trace heating - General and testing requirements | Specifies general and testing requirements for electrical resistance trace heaters for application in explosive atmospheres with the exclusion of those for Equipment Protection Levels (EPL) Ga, Da, Ma and Mb equipment. | 2026-12-08 | |
| SANS 60079-30-2:20xx Ed 3 | Explosive atmospheres Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance | Provides guidance for the application of electrical resistance trace heating systems in areas where explosive atmospheres may be present, with the exclusion of those classified as requiring EPL Ga/Da (traditional relationship to Zone 0 and Zone 20 respectively). This standard also provides guidance for explosive atmospheres incorporating the Division method of area classification that may be applied by some users of this standard. It provides recommendations for the design, installation, maintenance and repair of trace heating systems including associated control and monitoring equipment. | 2026-12-08 | |
| SANS 60196:20xx Ed 1 | IEC standard frequencies | Specifies the standard frequencies. The standard frequencies are the frequencies to be adopted for single-phase and three-phase a.c. systems, for installations in ships, for a.c. traction systems, for tools and for aircraft. | 2026-12-29 | |
| SANS 60227-5:20xx Ed 3 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V | Part 5: Flexible cables (cords). Details the particular specifications or polyvinyl chloride insulated flexible cables (cords), of rated voltages up to and including 300/500 V. | 2026-12-29 | |
| SANS 60270:XXXXXX Ed 2 | High-voltage test techniques - Charge-based measurement of partial discharges | Applicable to the measurement of partial discharges which occur in electrical apparatus, components or systems when tested with alternating voltages up to 400 Hz or with direct voltage. | 2026-12-08 | |
| SANS 60335-2 17:XXXX Ed 4 | Household and similar electrical appliances - Safety Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances | Deals with the safety of electric blankets, pads, clothing and other flexible appliances that heat the bed or human body, for household and similar purposes, their rated voltage being not more than 250 V. | 2026-12-29 | |
| SANS 60335-2-27:XXXX Ed 6 | Household and similar electrical appliances - Safety -Part 2-27: Particular requirements for appliances for skin exposure to optical radiation | Deals with the safety of electrical appliances incorporating emitters for exposing the skin to optical radiation (wavelength 100 nm to 1 mm), for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. | 2026-12-29 | |
| SANS 60335-2-40:XXXX Ed 7 | Household and similar electrical appliances — Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | Deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air conditioners, and dehumidifiers incorporating motor-compressors and hydronic fan coils units, their maximum rated voltages being not more than 250 V for single phase appliances and 600 V for all other appliances. | 2026-12-29 | |
| SANS 60364-7-711:20xx Ed 2 | Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Temporary electrical installations for exhibitions and entertainment related purposes | Applies to: electrical installations of temporary structures erected for exhibitions, shows, stands and fairgrounds for entertainment related purposes;, and temporary electrical installations supplying such temporary structures and amusement devices for entertainment related purposes. | 2027-01-05 | |
| SANS 60384-4:20xx Ed 3 | Fixed capacitors for use in electronic equipment Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (Mn02) and non-solid electrolyte | Applies to aluminium electrolytic capacitors with solid and non-solid electrolyte primarily intended for d.c. applications for use in electronic equipment. Covers capacitors for long-life applications and capacitors for general-purpose applications. | 2026-12-29 | |
| SANS 60534-1:20xx Ed 2 | Industrial-process control valves - Part 1: Control valve terminology and general considerations | Applies to all types of industrial-process control valves (hereinafter referred to as control valves). | 2026-12-29 | |
| SANS 60534-1:20xx Ed 2 | Industrial-process control valves - Part 1: Control valve terminology and general considerations | Applies to all types of industrial-process control valves (hereinafter referred to as control valves). | 2026-12-08 | |
| SANS 60598-2-2:20XX Ed 3 | Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling luminaires | Specifies requirements for recessed luminaires incorporating electric light sources for operation from supply voltages up to 1 000 V. It also specifies requirements for recessed air-handling luminaires for use with a ventilation duct or ventilated space (plenum). | 2026-12-08 | |
| SANS 60904-1-1:XXXX Ed 1 | Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices | Describes procedures for the measurement of the current-voltage characteristics of multi-junction photovoltaic devices in natural or simulated sunlight. It is applicable to single PV cells, sub-assemblies of such cells or entire PV modules. | 2026-12-29 | |
| SANS 61000-1-2:20XX Ed 3 | Electromagnetic compatibility (EMC) Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | Establishes a methodology for the achievement of functional safety only with regard to the electromagnetic phenomena of electrical and electronic systems and installations, as installed and used under operational conditions. | 2026-12-29 | |
| SANS 61000-2-4:20XX Ed 2 | Electromagnetic compatibility (EMC) Part 2-4: Environment — Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances | Deals with conducted disturbances in the frequency range from 0 kHz to 9 kHz. | 2026-12-29 | |
| SANS 61000-3-11:XXXX Ed 2 | Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection | Specifies limits for voltage changes, voltage fluctuations and flicker caused by electrical/electronic equipment connected to public low-voltage (LV) supply systems. | 2026-12-29 | |
| SANS 61109:20xx Ed 3 | Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria | Applies to composite suspension/tension insulators consisting of a load-bearing cylindrical insulating solid core consisting of fibres - usually glass - in a resin-based matrix, a housing (outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core. | 2026-12-08 | |
| SANS 61158-3-24:20xx Ed 2 | Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements | Provides common elements for basic time-critical messaging communications between devices in an automation environment. | 2027-01-05 | |
| SANS 6130:20xx Ed 2.1 | Dimensional changes and skewness of textile fabrics on exposure to heat | Amended to update normative references. | 2027-01-05 | |
| SANS 61326-2-2:20XX Ed 2 | Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems | Specifies electromagnetic compatibility (EMC) and immunity requirements for portable test, measuring, and monitoring equipment used in low-voltage distribution system | 2026-12-08 | |
| SANS 61326-2-3:20XX Ed 2 | Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning | Specifies precise test setups, operating conditions, and performance criteria for transducers that have integrated or remote signal conditioning | 2026-12-08 | |
| SANS 61326-2-4:20XX Ed 2 | Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 | Specifies electromagnetic compatibility (EMC) requirements, test configurations, operational conditions, and performance criteria for insulation monitoring devices and insulation fault location equipment connected to power distribution systems | 2026-12-08 | |
| SANS 61326-2-5:20XX Ed 2 | Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 | Specifies electromagnetic compatibility (EMC) requirements, test setups, working conditions, and performance limits for field devices that use field bus interfaces defined under IEC 61784-1 | 2026-12-08 | |
| SANS 61400-1:20xx Ed 2 | Wind turbines - Part 1: Design requirements | Specifies essential design requirements to ensure the structural integrity of wind turbines. | 2027-01-05 | |
| SANS 61400-25-3:XXXX Ed 2 | Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models | Specifies an abstract communication service interface describing the information exchange between a client and a server for data access and retrieval,device control,event reporting and logging,self-description of devices (device data dictionary),data typing and discovery of data types. | 2027-01-05 | |
| SANS 62264-2:20xx Ed 2 | Enterprise-Control System Integration - Part 2: Object models and relationships for interfaces between manufacturing operations and business functions | Specifies interface content exchanged between manufacturing control functions and other enterprise functions as interrelated information models. | 2027-01-05 | |
| SANS 62282-4-102:20xx Ed 1 | Fuel cell technologies - Part 4-102:Fuel cell power systems for electrically powered industrial trucks - Performance test methods | Specifies the performance test methods of fuel cell power systems for propulsion and auxiliary power units (APU). | 2027-01-05 | |
| SANS 62386-101:20xx Ed 3 | Digital addressable lighting interface - Part 101: General requirements - System components | Applies to system components in a bus system for control by digital signals of electronic lighting equipment. | 2026-12-29 | |
| SANS 62443-1-6:20xx Ed 1 | Security for industrial automation and control systems - Part 1-6: Application of the 62443 series to the Industrial Internet of Things (IIoT) | Introduces new communication channels, a new organization of functions, and new cybersecurity concerns. | 2027-01-05 | |
| SANS 62443-2-1:20xx Ed 2 | Security for industrial automation and control systems - Part 2-1: Security program requirements for IACS asset owners | Specifies asset owner security program (SP) policy and procedure requirements for an industrial automation and control system (IACS) in operation. | 2027-01-05 | |
| SANS 62443-2-2:20xx Ed 1 | Security for industrial automation and control systems - Part 2-2: IACS security protection scheme | Provides guidance on the development, validation, operation, and maintenance of a set of technical, physical, and process security measures called Security Protection Scheme (SPS). | 2027-01-05 | |
| SANS 62475:XXXX Ed 1 | High-current test techniques - Definitions and requirements for test currents and measuring systems | Applicable to high-current testing and measurements on both high-voltage and low-voltage equipment. It deals with steady-state and short-time direct current (as e.g. encountered in high-power DC testing), steady-state and short-time alternating current (as e.g. encountered in high-power AC testing), and impulse-current. In general, currents above 100 A are considered in this document, although currents less than this can occur in tests. | 2026-12-08 | |
| SANS 62485-6:20xx Ed 1 | Safety requirements for secondary batteries and battery installations - Part 6: Safe operation of lithium-ion batteries in traction applications | Applies to battery installations used for electric off-road vehicles; it does not cover the design of such vehicles. | 2026-12-29 | |
| SANS 62683-2-2:20xx Ed 1 | Low-voltage switchgear and controlgear - Product data and properties for information exchange - Engineering data - Part 2-2: Switchgear and controlgear assembly objects for building information modelling | This part of IEC 62683-2 specifies the building information modelling (BIM) with the physical characteristics and technical services of low-voltage switchgear and controlgear assemblies to be used mainly for the construction phase of the building and for delivering data for operation.This document covers all types of assemblies covered by the IEC 61439 series which can be installed in a building. Busbar trunking systems defined by IEC 61439-6 are under consideration for a next edition. These BIM object models, registered in IEC CDD, are intended to supply the process defined by ISO 16739 series. This document does not cover: – the built-in components included within the assembly such as switchgear and controlgear, – safety related control system of machinery, – the detailed electrical and mechanical configuration of the assembly – logistic information. | 2026-12-08 | |
| SANS 62770:20xx Ed 2 | Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment | Describes specifications and test methods for unused natural esters in transformers and similar liquid-immersed electrical equipment in which a liquid is required as an insulating and heat transfer medium. | 2026-12-08 | |
| SANS 62790:20xx Ed 1 | Junction boxes for photovoltaic modules - Safety requirements and tests | Describes safety requirements, constructional requirements and tests for junction boxes up to 1 500 V DC for use on photovoltaic modules in accordance with class II of IEC 61140:2016. | 2026-12-08 | |
| SANS 62805-2:20xx Ed 1 | Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance | Specifies methods for measuring the transmittance and reflectance of glass used in photovoltaic (PV) modules and provides instructions on how to calculate the effective hemispherical transmittance and reflectance of this glass. | 2027-01-05 | |
| SANS 62891:20xx Ed 1 | Maximum power point tracking efficiency of grid connected photovoltaic inverters | Provides a procedure for the measurement of the efficiency of the maximum power point tracking (MPPT) of inverters used in grid-connected photovoltaic (PV) systems. | 2026-12-08 | |
| SANS 632:20xx Ed 2.2 | Clay roofing tiles | Amended to delete the annex on notes to purchasers | 2026-12-29 | |
| SANS 65700-19-03:20xx Ed 2 | Bushings for DC application | Applies to outdoor and indoor bushings of any voltage used on DC systems, of capacitance graded or gas insulated types for use as components of liquid-filled converter transformers and smoothing reactors, as well as air-to-air DC bushings. | 2026-12-08 | |
| SANS 700:XXXX Ed 1.2 | Side upper leather (with a smooth corrected grain) | Amended to delete Annex A note to purchasers | 2026-12-29 | |
| SANS 706:20xx Ed 1.2 | Leather welting | Amended to delete the annex on notes to purchasers. | 2027-01-05 | |
| SANS 740-2:XXXX Ed 2 | General methods of test for pigments and extenders Part 2: Determination of matter volatile at 105 °C | Specifies a general method of test for determining the mass fraction in percent of matter volatile at a temperature of 105 °C in a sample of pigment or extender. This method is applicable to pigments and extenders that are stable at 105 °C. | 2026-12-29 | |
| SANS 814:XXXX Ed 3.4 | General purpose and aircraft hose clips (Worm-drive Type) | Amended to delete the annex on notes to purchasers, and to update referenced standards. | 2026-12-29 | |
| SANS 8502-2:XXXX Ed 2 | Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on cleaned surfaces | Describes a method for the determination of chloride-containing salts that are readily soluble in water and are present on a steel surface. The method is also applicable to previously coated surfaces. This part of ISO 8502 includes a method, applicable in the field or in the laboratory, for washing off the surface while several methods are referred to for chloride analyses. | 2026-12-29 | |
| SANS 8559-2:20XX Ed 2 | Size designation of clothes Part 2: Primary and secondary dimension indicators | Specifies primary and secondary dimensions for specified type of garments to be used in combination with ISO 8559-1 (published in South Africa as an identical adoption under the designation SANS 8559-1). | 2026-12-08 | |
| SANS 904-2:XXXX Ed 2 | Leather - Chemical tests - Preparation of chemical test samples | Specifies a method for the preparation of a test sample of leather for chemical analysis. | 2026-12-29 | |
| SANS 960:20xx Ed 4.2 | Textiles - Dimensional stability during washing and drying procedures. | Amended to update reference standards. | 2027-01-05 | |
| SANS 9648:202x Ed 1 | Tourism and related services - Online travel agency (OTA) - Guidelines for online accommodation booking platform services | Provides guidance on the operation of an effective online accommodation booking platform to meet the needs of accommodation service providers and users. | 2026-12-08 | |
| SANS 995:XXXX Ed 3.1 | Chamois leathers | Amended to delete the annex on notes to purchasers. | 2027-01-05 | |
| SATR 18-2:20XX Ed 1 | Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits | Applies to radio noise from overhead power lines and high-voltage equipment which may cause interference to radio reception | 2026-12-08 | |
| SATR 21221:202X Ed 1 | Information technology - Artificial intelligence - Beneficial AI systems | Describes the delivery of functional, economic, environmental, social, societal, cultural, intellectual and personal benefits by AI systems as perceived by their stakeholders | 2026-12-08 | |
| SATR 61000-1-1:20xx Ed 1 | Electromagnetic compatibility (EMC) - Part 1-1: General - Application and interpretation of fundamental definitions and terms | Aims to describe and interpret various terms considered to be of basic importance to concepts and practical application in the design and evaluation of electromagnetically compatible equipment and systems. | 2027-01-05 | |
| SATR 61282-5:20xx Ed 1 | Information technology - Artificial intelligence - Beneficial AI systems | Describes the delivery of functional, economic, environmental, social, societal, cultural, intellectual and personal benefits by AI systems as perceived by their stakeholders | 2026-12-08 | |
| SATR 61850-7-510:20xx Ed 2 | Communication networks and systems for power utility automation - Part 7-510: Basic communication structure - Hydroelectric power plants - Modelling concepts and guidelines | Provides explanations on how to use the Logical Nodes defined in IEC 61850-7-410 as well as other documents in the IEC 61850 series to model complex control functions in power plants, including variable speed pumped storage power plants. | 2026-12-29 | |
| SATR 61850-90-4:20xx Ed 2 | Communication networks and systems for power utility automation Part 90-4: Network engineering guidelines | Focuses on engineering a local area network limited to the requirements of IEC 61850-based substation automation. | 2026-12-29 | |
| SATR 61850-90-7:20xx Ed 2 | Communication networks and systems for power utility automation Part 90-7: Object models for power converters in distributed energy resources (DER) systems | Describes functions for power converterbased distributed energy resources (DER) systems, focused on DC-to-AC and AC-to-AC conversions and including photovoltaic systems (PV), battery storage systems, electric vehicle (EV) charging systems, and any other DER systems with a controllable power converter. | 2026-12-29 | |
| SATR 62000:20xx Ed 1 | Guidelines for combining different single-mode fibre sub-categories | Provides guidelines concerning single-mode fibre inter-compatibility. | 2026-12-08 | |
| SATR 62271-321:XXXX Ed 1 | High voltage switchgear and controlgear - Part 321: Product data and properties for information exchange - Catalogue data | Relates to high-voltage switchgear and controlgear for all rated voltage levels above 1 kV AC and 1,5 kV DC and assemblies thereof and provides materials for the reference dictionary for all products covered by the IEC 62271 series | 2027-01-05 | |
| SATR 62669:20xx Ed 1 | Case studies supporting IEC 62232 - Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | Presents a series of case studies in which electromagnetic field (EMF) exposure is evaluated in accordance with IEC 62232:2025 | 2027-01-05 | |
| SATR 62786-100:20xx Ed 1 | Distributed energy resources connection with the grid - Part 100: Generating plants and units grid connection standard mapping | Gives guidance for the drafting of IEC publications which relate, wholly or partly, to connection of distributed energy resources (DER) with the grid. | 2026-12-29 | |
| SATR 62786-102:20xx Ed 1 | Distributed energy resources connection with the grid - Part 102: CAES connection to the grid | Provides principles and technical needs for the interconnection of the compressed air energy storage (CAES) system to the distribution network. | 2026-12-29 | |
| SATS 14076:20XX Ed1 | Environmental management - Environmental techno-economic assessment - Principles, requirements and guidance | Provides principles, requirements and guidance for performing an environmental techno-economic assessment (eTEA). eTEAs provide economic analyses combined with an assessment of environmental impacts. This document specifies requirements for documenting the results, underlying assumptions, parameters and methodologies used in an eTEA. This document is applicable to process systems of any size or production scale. | 2026-12-29 | |
| SATS 60079-44:xxxx Ed 1 | Explosive atmospheres - Part 44: Personal competence | Provides guidance to establish recommended minimum criteria to determine roles, establish expectations of the necessary skills and evidence of competence to assess and manage the competence of personnel conducting work in or associated with hazardous areas. | 2026-12-08 | |
| SATS 61463:202x Ed 1 | Bushings - Seismic qualification | Applicable to alternating current and direct current bushings for highest voltages above 52 kV (or with resonance frequencies placed inside the seismic response spectrum), mounted on transformers, other apparatus or buildings. For bushings with highest voltages less than or equal to 52 kV (or with resonance frequencies placed outside from the seismic response spectrum), due to their characteristics, seismic qualification is not used as far as construction practice and seismic construction practice comply with the state of the art. This document presents acceptable seismic qualification methods and requirements to demonstrate that a bushing can maintain its mechanical properties, insulate and carry current during and after an earthquake. | 2026-12-08 | |
| SATS 61508-3-2:20xx Ed 1 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3-2: Requirements and guidance in the use of mathematical and logical techniques for establishing exact properties of software and its documentation | Covers the general assurance of dependable software used in critical operational-technology (OT) which is running on hardware devices which are specified as part of the OT application. | 2026-12-29 | |
| SATS 61934:202x Ed 1 | Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses | Applicable to the off-line electrical measurement of partial discharges (PDs) that occur in electrical insulation systems (EISs) when stressed by repetitive voltage impulses generated from power electronics devices. Typical applications are EISs belonging to apparatus driven by power electronics, such as motors, inductive reactors, wind turbine generators and the power electronics modules themselves. | 2026-12-08 | |
| SATS 62478:202x Ed 1 | High voltage test techniques - Measurement of partial discharges by electromagnetic and acoustic methods | Applicable to electromagnetic (HF/VHF/UHF) and acoustic measurements of PDs which occur in insulation of electrical apparatus. This specification deals with a large variety of applications, sensors of different frequency ranges and differing sensitivities. The tasks of PD location and measuring system calibration or sensitivity check are also taken into account. | 2026-12-08 | |
| SATS 62933-3-2:XXXX Ed 1 | Electrical energy storage (EES) systems - Part 3-2: Planning and performance assessment of electrical energy storage systems - Additional requirements for power intensive and renewable energy sources integration related applications | Provides the requirements for power intensive and renewable energy sources integration related applications of EES systems, including grid integration, performance indicators, sizing and planning, operation and control, monitoring and maintenance | 2026-12-29 | |
| SATS 63202-3:20xx Ed 1 | Photovoltaic cells - Part 3: Measurement of current-voltage characteristics of bifacial photovoltaic cells | Describes procedures for the measurement of current-voltage (I-V) characteristics of crystalline silicon bifacial photovoltaic (PV) cells for both laboratory and mass production applications. | 2027-01-05 | |
| SATS 63346-2-1:20XX Ed 1 | Low-voltage auxiliary power systems - Part 2-1: Design criteria - General requirements | Establishes the general principles for the design of low-voltage auxiliary power systems (APS) with nominal voltages below or equal to 1 kV AC and 1,5 kV DC, and nominal frequency up to and including 60 Hz, so as to provide safe and correct operation for the intended use. | 2027-01-05 | |
| SATS 63346-2-2:20xx Ed 1 | Low-voltage auxiliary power systems - Part 2-2: Design criteria - Low-voltage DC auxiliary power systems for substations | Provides common rules and specific requirements for the design of low voltage DC auxiliary power systems (APSs) intended to be installed in substations, mainly covering the configuration of DC power sources, system wiring, electric equipment selection and physical layout. | 2026-12-29 | |
| SATS 63397:XXXX Ed1 | Photovoltaic (PV) modules - Qualifying guidelines for increased hail resistance | This document defines additional testing requirements for modules deployed under applications or in environments where PV modules are likely to be exposed to the impact of hailstones leading to higher stress beyond the scope of the IEC 61215 series. | 2026-12-29 |