Page Header

Building & Construction - Standards & Publications

SABS provides a range of standards covering the demands of the Building & Construction industry, from quality management systems to test methods for specific materials or parts. These will help your organization to enhance customer satisfaction, meet regulatory, safety and reliability requirements, and ensure consistency of quality throughout the supply chain.

Related Standards & Publications

IEC/TR 60079-13

Electrical apparatus for explosive gas atmosphere - Part 13: Construction and use of rooms or buildings protected by pressurization

ISO 3009:2003

Fire-resistance tests -- Elements of building construction -- Glazed elements

ISO 12215-8:2009

Small craft -- Hull construction and scantlings -- Part 8: Rudders

ISO 13442:2004

Tyres and rims for construction machines

ISO 12006-3:2007

Building construction -- Organization of information about construction works -- Part 3: Framework for object-oriented information

ISO 19433:2008

Building construction machinery and equipment -- Pedestrian-controlled vibratory plates -- Terminology and commercial specifications

ISO 19432:2006

Building construction machinery and equipment -- Portable, hand-held, internal combustion engine driven cut-off machines -- Safety requirements and testing

ISO 4141-3:2006

Road vehicles -- Multi-core connecting cables -- Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables

ISO 21485:2006

Textile machinery -- Draw frame for cotton spinning -- Vocabulary and principles of construction

ISO 12215-5:2008

Small craft -- Hull construction and scantlings -- Part 5: Design pressures for monohulls, design stresses, scantlings determination

ISO 15392:2008

Sustainability in building construction -- General principles

ISO 21930:2007

Sustainability in building construction -- Environmental declaration of building products

ISO/TS 21929-1:2006

Sustainability in building construction -- Sustainability indicators -- Part 1: Framework for development of indicators for buildings

ISO/TS 21931-1:2006

Sustainability in building construction -- Framework for methods of assessment for environmental performance of construction works -- Part 1: Buildings

ISO 21307:2009

Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

ISO 22242:2005

Road construction and road maintenance machinery and equipment -- Basic types -- Identification and description

ISO 22263:2008

Organization of information about construction works -- Framework for management of project information

ISO 10211:2007

Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculations

ISO 14683:2007

Thermal bridges in building construction -- Linear thermal transmittance -- Simplified methods and default values

ISO 22721:2007

Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining

ISO 9809-1:2010

Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa

ISO 9809-2:2010

Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa

ISO 9809-3:2010

Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 3: Normalized steel cylinders

ISO 12215-6:2008

Small craft -- Hull construction and scantlings -- Part 6: Structural arrangements and details

ISO 6944-2:2009

Fire containment -- Elements of building construction -- Part 2: Kitchen extract ducts

ISO 11601:2008

Fire fighting -- Wheeled fire extinguishers -- Performance and construction

ISO 7165:2009

Fire fighting -- Portable fire extinguishers -- Performance and construction

ISO 28239:2008

Textile machinery -- Opener and cleaner for staple fibres preparation -- Vocabulary and principles of construction

ISO 1040:1983

Building construction -- Modular coordination -- Multimodules for horizontal coordinating dimensions

ISO 10547:2009

Polyester fibre ropes -- Double braid construction

ISO 10554:2009

Polyamide fibre ropes -- Double braid construction

ISO 6944-1:2008

Fire containment -- Elements of building construction -- Part 1: Ventilation ducts

ISO/TR 12603:2010

Building construction machinery and equipment -- Classification

ISO 19452:2008

Building construction machinery and equipment -- Pedestrian-controlled vibratory (percussion) rammers -- Terminology and commercial specifications

ISO/TR 834-2:2009

Fire-resistance tests -- Elements of building construction -- Part 2: Guidance on measuring uniformity of furnace exposure on test samples

ISO 15878:2008

Road construction and maintenance equipment -- Asphalt pavers -- Terminology and commercial specifications

ISO/TR 12910:2010

Light-frame timber construction -- Comparison of four national design documents

ISO 834-9:2003

Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements

ISO 834-8:2002

Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-loadbearing vertical separating elements

ISO 9047:2001

Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants at variable temperatures

ISO 11117:2008

Gas cylinders -- Valve protection caps and valve guards -- Design, construction and tests

ISO 965-3:1998

ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads

ISO/TR 4870:1991

Acoustics -- The construction and calibration of speech intelligibility tests

ISO 10845-4:2011

Construction procurement -- Part 4: Standard conditions for the calling for expressions of interest

ISO 10845-5:2011

Construction procurement -- Part 5: Participation of targeted enterprises in contracts

IEC/TS 61423-2

Heating cables for industrial applications - Part 2: Constructional and material requirements

ISO 10845-3:2011

Construction procurement -- Part 3: Standard conditions of tender

ISO 15143-2:2010

Earth-moving machinery and mobile road construction machinery -- Worksite data exchange -- Part 2: Data dictionary

ISO/TS 26873:2010

Plastics pipes and fittings -- Definition and construction procedures for reference lines

ISO 21931-1:2010

Sustainability in building construction -- Framework for methods of assessment of the environmental performance of construction works -- Part 1: Buildings

ISO 10845-1:2010

Construction procurement -- Part 1: Processes, methods and procedures

ISO 8394-1:2010

Building construction -- Jointing products -- Part 1: Determination of extrudability of sealants

ISO 8394:1988

Building construction -- Jointing products -- Determination of extrudability of one-component sealants

ISO 384:1978

Laboratory glassware -- Principles of design and construction of volumetric glassware

ISO 386:1977

Liquid-in-glass laboratory thermometers -- Principles of design, construction and use

ISO 387:1977

Hydrometers -- Principles of construction and adjustment

ISO 2562:1973

Modular units for machine tool construction -- Slide units

ISO 386:1977

Liquid-in-glass laboratory thermometers -- Principles of design, construction and use

ISO 8394-2:2010

Building construction -- Jointing products -- Part 2: Determination of extrudability of sealants using standardized apparatus

ISO/IEC 14575:2000

Information technology -- Microprocessor systems -- Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)

ISO 5843-1:1985

Aerospace construction -- List of equivalent terms -- Part 1: Aerospace electrical equipment

ISO 26243:2007

Cards for staple fibres spinning -- Vocabulary and principles of construction

ISO 21873-2:2009

Building construction machinery and equipment -- Mobile crushers -- Part 2: Safety requirements

ISO 11527:2010

Building construction -- Sealants -- Test method for the determination of stringiness

ISO 11375:1998

Building construction machinery and equipment -- Terms and definitions

ISO 834-1:1999

Fire-resistance tests -- Elements of building construction -- Part 1: General requirements

ISO 1791:1983

Building construction -- Modular co-ordination -- Vocabulary

ISO 1803:1997

Building construction -- Tolerances -- Expression of dimensional accuracy -- Principles and terminology

ISO 2406:1974

Continuous mechanical handling equipment -- Mobile and portable conveyors -- Constructional specifications

ISO 2727:1973

Modular units for machine tool construction -- Headstocks

ISO 2769:1973

Modular units for machine tool construction -- Wing bases for slide units

ISO 2848:1984

Building construction -- Modular coordination -- Principles and rules

ISO 2891:1977

Modular units for machine tool construction -- Centre bases and columns

ISO 2905:1985

Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi-spindle heads

ISO 2934:1973

Modular units for machine tool construction -- Wing base for columns

ISO 3371:1975

Modular units for machine tool construction -- Rotary tables and multi-sided centre bases for rotary tables

ISO 3443-5:1982

Building construction -- Tolerances for building -- Part 5: Series of values to be used for specification of tolerances

ISO 3443-8:1989

Tolerances for building -- Part 8: Dimensional inspection and control of construction work

ISO 3476:1975

Modular units for machine tool construction -- Tenon drive and flanges for mounting multi- spindle heads

ISO 3589:1975

Modular units for machine tool construction -- Integral way columns

ISO 3590:1976

Modular units for machine tool construction -- Spindle units

ISO 3610:1976

Modular units for machine tool construction -- Support brackets

ISO 3880-1:1977

Building construction -- Stairs -- Vocabulary

ISO 387:1977

Hydrometers -- Principles of construction and adjustment

ISO 3881:1977

Building construction -- Modular co-ordination -- Stairs and stair openings -- Co-ordinating dimensions

ISO 3970:1977

Modular units for machine tool construction -- Integral way columns -- Floor-mounted type

ISO 4172:1991

Technical drawings -- Construction drawings -- Drawings for the assembly of prefabricated structures

ISO 4778:1981

Chain slings of welded construction -- Grades M (4), S (6) and T (8)

ISO 6178:1983

Centrifuges -- Construction and safety rules -- Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor

ISO 6242-1:1992

Building construction -- Expression of users' requirements -- Part 1: Thermal requirements

ISO 6242-2:1992

Building construction -- Expression of users' requirements -- Part 2: Air purity requirements

ISO 6242-3:1992

Building construction -- Expression of users' requirements -- Part 3: Acoustical requirements

ISO 6284:1996

Construction drawings -- Indication of limit deviations

ISO 6511:1982

Building construction -- Modular coordination -- Modular floor plane for vertical dimensions

ISO 6513:1982

Building construction -- Modular coordination -- Series of preferred multimodular sizes for horizontal dimensions

ISO 6514:1982

Building construction -- Modular coordination -- Sub-modular increments

ISO 6927:1981

Building construction -- Jointing products -- Sealants -- Vocabulary

ISO 7078:1985

Building construction -- Procedures for setting out, measurement and surveying -- Vocabulary and guidance notes

ISO 7211-2:1984

Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 2: Determination of number of threads per unit length

ISO 7211-3:1984

Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 3: Determination of crimp of yarn in fabric

ISO 7211-1:1984

Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting

ISO 7211-4:1984

Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 4: Determination of twist in yarn removed from fabric

ISO 7211-5:1984

Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 5: Determination of linear density of yarn removed from fabric

ISO 7211-6:1984

Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 6: Determination of the mass of warp and weft per unit area of fabric

ISO 7437:1990

Technical drawings -- Construction drawings -- General rules for execution of production drawings for prefabricated structural components

ISO 7519:1991

Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings

ISO 7727:1984

Joints in building -- Principles for jointing of building components -- Accommodation of dimensional deviations during construction

ISO 7866:1999

Gas cylinders -- Refillable seamless aluminium alloy gas cylinders -- Design, construction and testing

ISO 8048:1984

Technical drawings -- Construction drawings -- Representation of views, sections and cuts

ISO/TR 8389:1984

Building construction -- Modular coordination -- System of preferred numbers defining multimodular sizes

ISO/TR 8390:1984

Building construction -- Modular coordination -- Application of horizontal multimodules

ISO 8559:1989

Garment construction and anthropometric surveys -- Body dimensions

ISO 8560:1986

Technical drawings -- Construction drawings -- Representation of modular sizes, lines and grids

ISO 9242:1988

Pliers and nippers -- Construction worker's pincers -- Dimensions and test values

ISO 9431:1990

Construction drawings -- Spaces for drawing and for text, and title blocks on drawing sheets

ISO 1006:1983

Building construction -- Modular coordination -- Basic module

ISO 11091:1994

Construction drawings -- Landscape drawing practice

ISO 11120:1999

Gas cylinders -- Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l -- Design construction and testing

ISO/TR 11444:1995

Quality of sawn wood used for the construction of pallets

ISO/TR 11761:1992

Light-gauge metal containers -- Round open-top cans -- Classification of can sizes by construction type

ISO/TR 11762:1992

Light-gauge metal containers -- Round open-top cans for liquid products with added gas -- Classification of can sizes by construction type

ISO 12175:1994

Space data and information transfer systems -- Standard formatted data units -- Structure and construction rules

ISO/TR 834-3:1994

Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and test data application

ISO 834-4:2000

Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements

ISO 128-23:1999

Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings

ISO 13638:1996

Building construction -- Sealants -- Determination of resistance to prolonged exposure to water

ISO 13640:1999

Building construction -- Jointing products -- Specifications for test substrates

ISO/TR 9527:1994

Building construction -- Needs of disabled people in buildings -- Design guidelines

ISO 10209-4:1999

Technical product documentation -- Vocabulary -- Part 4: Terms relating to construction documentation

ISO 13920:1996

Welding -- General tolerances for welded constructions -- Dimensions for lengths and angles -- Shape and position

ISO/TR 11696-2:1999

Uses of reaction to fire test results -- Part 2: Fire hazard assessment of construction products

ISO 14644-4:2001

Cleanrooms and associated controlled environments -- Part 4: Design, construction and start-up

ISO 12215-3:2002

Small craft -- Hull construction and scantlings -- Part 3: Materials: Steel, aluminium alloys, wood, other materials

ISO 12215-4:2002

Small craft -- Hull construction and scantlings -- Part 4: Workshop and manufacturing

ISO 4157-1:1998

Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings

ISO 4157-2:1998

Construction drawings -- Designation systems -- Part 2: Room names and numbers

ISO 11600:2002

Building construction -- Jointing products -- Classification and requirements for sealants

ISO 13567-2:1998

Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts, format and codes used in construction documentation

ISO 4157-3:1998

Construction drawings -- Designation systems -- Part 3: Room identifiers

ISO 15401:2000

Ships and marine technology -- Bulk carriers -- Construction quality of hull structure

ISO 11119-3:2002

Gas cylinders of composite construction -- Specification and test methods -- Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners

ISO 15642:2003

Road construction and maintenance equipment -- Asphalt mixing plants -- Terminology and commercial specifications

ISO 15643:2002

Road construction and maintenance equipment -- Bituminous binder spreaders/sprayers -- Terminology and commercial specifications

ISO 15644:2002

Road construction and maintenance equipment -- Chippings spreaders -- Terminology and commercial specifications

ISO 15645:2002

Road construction and maintenance equipment -- Road milling machinery -- Terminology and commercial specifications

ISO 15688:2003

Road construction and maintenance equipment -- Soil stabilizers -- Terminology and commercial specifications

ISO 15689:2003

Road construction and maintenance equipment -- Powder binder spreaders -- Terminology and commercial specifications

ISO 16039:2004

Road construction and maintenance equipment -- Slipform pavers -- Definitions and commercial specifications

ISO 834-5:2000

Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements

ISO 834-6:2000

Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams

ISO 834-7:2000

Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns

ISO 6971:2002

Cranked-link drag chains of welded construction, attachments and sprockets

ISO 6972:2002

Cranked-link mill chains of welded construction, attachments and sprockets

ISO/TR 19033:2000

Technical product documentation -- Metadata for construction documentation

ISO 16156:2004

Machine-tools safety -- Safety requirements for the design and construction of work holding chucks

ISO 16938-1:2008

Building construction -- Determination of the staining of porous substrates by sealants used in joints -- Part 1: Test with compression

ISO 12215-1:2000

Small craft -- Hull construction and scantlings -- Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate

ISO 11119-1:2002

Gas cylinders of composite construction -- Specification and test methods -- Part 1: Hoop wrapped composite gas cylinders

ISO 18650-2:2006

Building construction machinery and equipment -- Concrete mixers -- Part 2: Procedure for examination of mixing efficiency

ISO 18652:2005

Building construction machinery and equipment -- External vibrators for concrete

ISO 7389:2002

Building construction -- Jointing products -- Determination of elastic recovery of sealants

ISO 7390:2002

Building construction -- Jointing products -- Determination of resistance to flow of sealants

ISO 9046:2002

Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants at constant temperature

ISO/TR 19358:2002

Ergonomics -- Construction and application of tests for speech technology

ISO 3766:2003

Construction drawings -- Simplified representation of concrete reinforcement

ISO 12215-2:2002

Small craft -- Hull construction and scantlings -- Part 2: Materials: Core materials for sandwich construction, embedded materials

ISO 19901-5:2003

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 5: Weight control during engineering and construction

ISO 8339:2005

Building construction -- Sealants -- Determination of tensile properties (Extension to break)

ISO 8340:2005

Building construction -- Sealants -- Determination of tensile properties at maintained extension

ISO 82045-5:2005

Document management -- Part 5: Application of metadata for the construction and facility management sector

ISO 16938-2:2008

Building construction -- Determination of the staining of porous substrates by sealants used in joints -- Part 2: Test without compression

ISO 10563:2005

Building construction -- Sealants -- Determination of change in mass and volume

ISO 10590:2005

Building construction -- Sealants --- Determination of tensile properties of sealants at maintained extension after immersion in water

ISO 10591:2005

Building construction -- Sealants -- Determination of adhesion/cohesion properties of sealants after immersion in water

ISO 11432:2005

Building construction -- Sealants -- Determination of resistance to compression

ISO 13590:2003

Small craft -- Personal watercraft -- Construction and system installation requirements

ISO 12006-2:2001

Building construction -- Organization of information about construction works -- Part 2: Framework for classification of information

ISO 20725:2004

Textile machinery -- Condensers for cotton spinning -- Vocabulary and principles of construction

ISO 20726:2004

Textile machinery -- Hopper feeders for cotton spinning -- Vocabulary and principles of construction

ISO 14120:2002

Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards

ISO 11119-2:2002

Gas cylinders of composite construction -- Specification and test methods -- Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners

ISO 21537-2:2004

Clamping flanges for superabrasive cutting-off wheels -- Part 2: Building and construction

ISO 21573-1:2006

Building construction machinery and equipment -- Concrete pumps -- Part 1: Terminology and commercial specifications

ISO 21592:2006

Building construction machinery and equipment -- Concrete spraying machines -- Terminology and commercial specifications

ISO 5797:2004

Ships and marine technology -- Windows and side scuttles for fire-resistant constructions

ISO 21573-2:2008

Building construction machinery and equipment -- Concrete pumps -- Part 2: Procedure for examination of technical parameters

ISO 5707:2007

Milking machine installations -- Construction and performance

ISO 21281:2005

Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks -- Rules for the construction and layout of pedals

ISO 10845-6:2011

Construction procurement -- Part 6: Participation of targeted partners in joint ventures in contracts

IEC 60055-2

Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements

IEC 60055-2-am1

Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements

IEC 60879

Performance and construction of electric circulating fans and regulators

IEC/TR 61200-704

Electrical installation guide - Part 704: Construction and demolition site installations

ISO 22991:2004

Gas cylinders -- Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Design and construction

ISO/IEC 14575

Information technology - Microprocessor systems - Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)

IEC 60034-7-am1

Amendment 1 - Rotating electrical machines - Part 7: Classification of types of constructions and mounting arrangements (IM Code)

IEC 60034-7

Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

IEC 60322

Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction

IEC 61811-51

Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction

IEC 60405

Nuclear instrumentation - Constructional requirements and classification of radiometric gauges

IEC 60439-4

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

IEC 60952-2

Aircraft batteries - Part 2: Design and construction requirements

IEC 61730-1

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

IEC 60055-2-am2

Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements

IEC 60364-7-704

Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations

IEC 62013-1

Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion

IEC 61133

Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service

IEC 60092-350

Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications

IEC 61188-7

Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction

IEC 61558-2-23

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites

SANS 10120-2 H

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification H: Structural steelwork

SANS 114

Laboratory glassware - Principles of design and construction of volumetric glassware

SANS 1200 HB

Standardized specification for civil engineering construction Section HB: Cladding and sheeting

SANS 1200 DM

Standardized specification for civil engineering construction Section DM: Earthworks (roads, subgrade)

SANS 1200 LC

Standardized specification for civil engineering construction Section LC: Cable ducts

SANS 1200 LE

Standardized specification for civil engineering construction Section LE: Stormwater drainage

SANS 1200 DN

Standardized specification for civil engineering construction Section DN: Earthworks (railway sidings)

SANS 1200 GE

Standardized specification for civil engineering construction Section GE: Precast concrete (structural)

SANS 1200 L

Standardized specification for civil engineering construction Section L: Medium-pressure pipe lines

SANS 1200 MK

Standardized specification for civil engineering construction Section MK: Kerbing and channelling

SANS 1200 MG

Civil engineering construction Section MG: Bituminous surface treatment

SANS 10161

The design of foundations for buildings

SANS 10073

The safe application of masonry-type facings to buildings

SANS 10143

Building drawing practice

SANS 10087-4

The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation of LP gas including the design, construction, inspection, fittings, filling, maintenance and repair of LP gas bulk vehicles and rail tank cars

CKS 606

Boots for firemen, direct-vulcanized construction

SANS 1200 AD

Standardized specification for civil engineering construction Section AD: General (Small dams)

SANS 952

Polyolefin film for damp- and waterproofing in buildings

SANS 1200 NB

Standardized specification for civil engineering construction Section NB: Railway sidings (trackwork)

SANS 10120-5 HA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HA: Structural steelwork (sundry items)

SANS 10120-5 H

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section H: Structural steelwork

SANS 10120-3 HA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HA: Structural steelwork (sundry items)

SANS 10120-3 H

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section H: Structural steelwork

SANS 10120-2 HA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification HA: Structural steelwork (sundry items)

SANS 10252-2

Water supply and drainage for buildings Part 2: Drainage installations for buildings

SANS 10120-4 H

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section H: Structural steelwork

SANS 1200 LF

Standardized specification for civil engineering construction Section LF: Erf connections (water)

SANS 10120-4 HA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HA: Structural steelwork (sundry items)

SANS 10400

The application of the National Building Regulations

SANS 1200 D

Standardized specification for civil engineering construction Section D: Earthworks

SANS 10400 (ALL PARTS)

The application of the National Building Regulations (including SANS 204)

SANS 1200 DB

Standardized specification for civil engineering construction Section DB: Earthworks (pipe trenches)

SANS 1200 M

Standardized specification for civil engineering construction Section M: Roads (general)

SANS 722

The production of infants' and children's shoes (stuck-on and stitch-down construction)

SANS 1200 H

Standardized specification for civil engineering construction Section H: Structural steelwork

SANS 1200 HA

Standardized specification for civil engineering construction Section HA: Structural steelwork (sundry items)

SANS 10160

The general procedures and loadings to be adopted in the design of buildings

SANS 1200 LD

Standardized specification for civil engineering construction Section LD: Sewers

SANS 140-3

Acoustics - Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements

SANS 10120-1

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 1: Format and contents

SANS 10120-4 GE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GE: Precast concrete (structural)

SANS 10120-4 DN

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DN: Earthworks (railway sidings)

SANS 10120-4 DK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DK: Gabions and pitching

SANS 10120-4 DE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DE: Small earth dams

SANS 10120-4 L

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section L: Medium-pressure pipelines

SANS 1200 DK

Standardized specification for civil engineering construction Section DK: Gabions and pitching

SANS 1200 MF

Standardized specification for civil engineering construction Section MF: Base

SANS 10120-4 HC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HC: Corrosion protection of structural steelwork

SANS 10225

The design and construction of lighting masts

SANS 1200 F

Standardized specification for civil engineering construction Section F: Piling

SANS 1200 HE

Standardized specification for civil engineering construction Section HE: Structural aluminiumwork

SANS 1200 MM

Standardized specification for civil engineering construction Section MM: Ancillary roadworks

SANS 10120-4 DB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DB: Earthworks (pipe trenches)

SANS 1200 A

Standardized specification for civil engineering construction Section A: General

SANS 1200 LG

Standardized specification for civil engineering construction Section LG: Pipe jacking

SANS 1200 MH

Civil engineering construction Section MH: Asphalt base and surfacing

SANS 1200 GF

Standardized specification for civil engineering construction Section GF: Prestressed concrete

SANS 1200 DA

Standardized specification for civil engineering construction Section DA: Earthworks (small works)

SANS 10120-4 DM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DM: Earthworks (roads, subgrade)

SANS 10120-4 INTRO

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities, Introduction

SANS 10120-5 MM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MM: Ancillary roadworks

SANS 1200 GA

Standardized specification for civil engineering construction Section GA: Concrete (small works)

SANS 1200 LB

Standardized specification for civil engineering construction Section LB: Bedding (pipes)

SANS 1200 ME

Standardized specification for civil engineering construction Section ME: Subbase

SANS 1200 AB

Standardized specification for civil engineering construction Section AB: Engineer's office

SANS 10120-5 AD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AD: General (small dams)

SANS 1200 GB

Standardized specification for civil engineering construction Section GB: Concrete (ordinary buildings)

SANS 1200 AH

Standardized specification for civil engineering construction Section AH: General (structural)

SANS 1200 AA

Standardized specification for civil engineering construction Section AA: General (small works)

SANS 1381-6

Materials for thermal insulation of buildings Part 6: Cellulose loose fill thermal insulation material

SANS 1200 C

Standardized specification for civil engineering construction Section C: Site clearance

SANS 10120-4 MM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MM: Ancillary roadworks

SANS 10120-4 LB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LB: Bedding (pipes)

SANS 10120-4 MK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MK: Kerbing and channelling

SANS 10120-2 MM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MM: Ancillary roadworks

SANS 10120-5 LB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LB: Bedding (pipes)

SANS 10120-2 GE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GE: Precast concrete (structural)

SANS 10120-2 HE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HE: Structural aluminiumwork

SANS 10120-3 MM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MM: Ancillary roadworks

SANS 10120-4 HB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HB: Cladding and sheeting

SANS 10120-5 DK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DK: Gabions and pitching

SANS 10120-2 INTRO

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification, Introduction

SANS 10120-3 DK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DK: Gabions and pitching

SANS 10120-2 GA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GA: Concrete (small works)

SANS 10120-5 AB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AB: Engineer's office

SANS 10120-5 DN

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DN: Earthworks (railway sidings)

SANS 10120-4 MH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MH: Asphalt base and surfacing

SANS 10120-4 MG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MG: Bituminous surface treatment

SANS 10120-4 MF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MF: Base

SANS 10120-3 DB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DB: Earthworks (pipe trenches)

SANS 10120-3 MK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MK: Kerbing and channeling

SANS 10120-5 G

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section G: Concrete (structural)

SANS 10120-3 LF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LF: Erf connections (water)

SANS 10120-2 MK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MK: Kerbing and channeling

SANS 10120-2 NB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section NB: Railway sidings (trackwork)

SANS 10120-2 DN

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DN: Earthworks (railway sidings)

SANS 10246

Accessibility of buildings to disabled persons

SANS 10120-2 GF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GF: Prestressed concrete

SANS 10120-4 GF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GF: Prestressed concrete

SANS 10120-4 LG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LG: Pipe jacking

SANS 10120-3 DN

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DN: Earthworks (railway sidings)

SANS 110

Sealing compounds for the building industry, two-component, polysulphide base

SANS 1200 G

Standardized specification for civil engineering construction Section G: Concrete (structural)

SANS 10120-2 A

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section A: General

SANS 10120-2 AA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AA: General (small works)

SANS 10120-2 AB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AB: Engineer's office

SANS 10120-2 AD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AD: General (small dams)

SANS 10120-2 AH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AH: General (structural)

SANS 10120-2 TO 5 A SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section A : General

SANS 10120-2 TO 5 AA SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section AA: General (small works)

SANS 10120-2 TO 5 AB SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section AB: Engineer's office

SANS 10120-2 TO 5 AD SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section AD: General (small dams)

SANS 10120-2 TO 5 AH SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section AH: General (structural)

SANS 10120-2 TO 5 C SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section C: Site clearance

SANS 10120-2 TO 5 D SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section D: Earthworks

SANS 10120-2 TO 5 DA SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section DA: Earthworks (small works)

SANS 10120-2 C

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section C: Site clearance

SANS 10120-2 D

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section D: Earthworks

SANS 10120-2 DA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DA: Earthworks (small works)

SANS 10120-2 DB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DB: Earthworks (pipe trenches)

SANS 10120-2 DE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DE: Small earth dams

SANS 10120-2 DK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DK: Gabions and pitching

SANS 10120-2 DM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DM: Earthworks (roads, subgrade)

SANS 10120-5 GE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GE: Precast concrete (structural)

SANS 10120-2 F

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section F: Piling

SANS 10120-2 G

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section G: Concrete (structural)

SANS 10120-5 ME

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section ME: Subbase

SANS 10120-2 GB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GB: Concrete (ordinary buildings)

SANS 10120-2 HB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HB: Cladding and sheeting

SANS 10120-3 HE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HE: Structural aluminiumwork

SANS 10120-2 LB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LB: Bedding (pipes)

SANS 10120-2 LC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LC: Cable ducts

SANS 10120-2 LD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LD: Sewers

SANS 10120-2 LF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LF: Erf connections (water)

SANS 10120-2 LG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LG: Pipe jacking

SANS 10120-2 ME

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section ME: Subbase

SANS 10120-2 MF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MF: Base

SANS 10120-3 A

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section A: General

SANS 10120-3 AA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AA: General (small works)

SANS 10120-3 AB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AB: Engineer's office

SANS 10120-3 AD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AD: General (small dams)

SANS 10120-3 AH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AH: General (structural)

SANS 10120-3 C

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section C: Site clearance

SANS 10120-3 D

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section D: Earthworks

SANS 10120-3 DA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DA: Earthworks (small works)

SANS 10120-3 DE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DE: Small earth dams

SANS 10120-3 DM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DM: Earthworks (roads, subgrade)

SANS 10120-3 ME

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section ME: Subbase

SANS 10120-3 F

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section F: Piling

SANS 10120-3 G

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section G: Concrete (structural)

SANS 10120-3 GA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GA: Concrete (small works)

SANS 10120-3 GB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GB: Concrete (ordinary buildings)

SANS 10120-3 GE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GE: Precast concrete (structural)

SANS 10120-3 GF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GF: Prestressed concrete

SANS 10120-3 HB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HB: Cladding and sheeting

SANS 10120-3 INTRO

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design, Introduction

SANS 10120-3 L

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section L: Medium-pressure pipelines

SANS 10120-3 LB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LB: Bedding (pipes)

SANS 10120-3 LC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LC: Cable ducts

SANS 10120-3 LD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LD: Sewers

SANS 10120-3 LG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LG: Pipe jacking

SANS 10120-3 MF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MF: Base

SANS 10120-5 AA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AA: General (small works)

SANS 10120-3 NB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section NB: Railway sidings (trackwork)

SANS 10120-5 GB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GB: Concrete (ordinary buildings)

SANS 10120-5 AH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AH: General (structural)

SANS 10120-5 DA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DA: Earthworks (small works)

SANS 10120-5 DB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DB: Earthworks (pipe trenches)

SANS 10120-5 DE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DE: Small earth dams

SANS 10120-5 DM

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DM: Earthworks (roads, subgrade)

SANS 10120-5 F

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section F: Piling

SANS 10120-5 GA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GA: Concrete (small works)

SANS 10120-5 GF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GF: Prestressed concrete

SANS 10120-5 HC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HC: Corrosion protection of structural steelwork

SANS 10120-5 HB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HB: Cladding and sheeting

SANS 10120-5 HE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HE: Structural aluminiumwork

SANS 10120-5 INTRO

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration, Introduction

SANS 10120-5 L

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section L: Medium-pressure pipelines

SANS 10120-5 LC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LC: Cable ducts

SANS 10120-5 LD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LD: Sewers

SANS 10120-5 LE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LE: Stormwater drainage

SANS 10120-5 LF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LF: Erf connections (water)

SANS 10120-5 LG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LG: Pipe jacking

SANS 10120-4 LF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LF: Erf connections (water)

SANS 10120-5 MF

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MF: Base

SANS 10120-5 MG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MG: Bituminous surface treatment

SANS 10120-5 MH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MH: Asphalt base and surfacing

SANS 10120-5 MJ

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MJ: Segmented paving

SANS 10120-5 MK

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MK: Kerbing and channelling

SANS 10120-5 NB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section NB: Railway sidings (trackwork)

SANS 10120-5 A

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section A: General

SANS 10120-2 L

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section L: Medium-pressure pipelines

SANS 10120-5 D

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section D: Earthworks

SANS 10120-4 LE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LE: Stormwater drainage

SANS 10120-4 LD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LD: Sewers

SANS 10120-4 F

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section F: Piling

SANS 10120-4 HE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HE: Structural alumuniumwork

SANS 10120-5 C

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section C: Site clearance

SANS 10120-4 G

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section G: Concrete (structural)

SANS 10120-4 GA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GA: Concrete (small works)

SANS 10120-4 DA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DA: Earthworks (small works)

SANS 10120-4 D

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section D: Earthworks

SANS 10120-4 C

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section C: Site clearance

SANS 10120-4 AH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AH: General (structural)

SANS 10120-4 AD

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AD: General (small dams)

SANS 10120-4 AB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AB: Engineer's office

SANS 10120-4 AA

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AA: General (small works)

SANS 10120-4 A

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section A: General

SANS 10120-4 ME

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section ME: Subbase

SANS 10120-4 NB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section NB: Railway sidings (trackwork)

SANS 10120-4 MJ

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MJ: Segmented paving

SANS 10120-3 MJ

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MJ: Segmented paving

SANS 10120-3 MG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MG: Bituminous surface treatment

SANS 10120-2 MJ

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MJ: Segmented paving

SANS 10120-2 MH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MH: Asphalt base and surfacing

SANS 10120-2 MG

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MG: Bituminous surface treatment

SANS 10120-2 M

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section M: Roads (general)

SANS 1200 MJ

Standardized specification for civil engineering construction Section MJ: Segmented paving

SANS 10120-3 LE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LE: Stormwater drainage

SANS 10120-2 LE

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LE: Stormwater drainage

SANS 10120-3 M

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section M: Roads (general)

SANS 10120-3 MH

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MH: Asphalt base and surfacing

SANS 10120-2 HC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HC: Corrosion protection of structural steelwork

SANS 10120-3 HC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HC: Corrosion protection of structural steelwork

SANS 10120-4 GB

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GB: Concrete (ordinary buildings)

SANS 10120-4 LC

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LC: Cable ducts

SANS 1363

Young people's shoes (stuck-on and stitch-down constructions)

SANS 9048

Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus

ISO 6512:1982

Building construction -- Modular coordination -- Storey heights and room heights

SANS 140-1

Acoustics - Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission

SANS 140-2

Acoustics - Measurement of sound insulation in buildings and of building elements Part 2: Determination, verification and application of precision data

SANS 1701-5-11

Bearings Part 5: Pedestal bearings and structural bearings Section 11: Shipbuilding and marine structures - Trunnion pieces for span bearings and lead block bearings

SANS 1701-5-9

Bearings Part 5: Pedestal bearings and structural bearings Section 9: Shipbuilding and marine structures - Bearings for derrick goosenecks - Assemblies and components

SANS 1200 MFL

Standardized specification for civil engineering construction Section MFL: Base (light pavement structures)

SANS 10120-2 MFL

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MFL: Base (light pavement structures)

SANS 10120-3 MFL

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MFL: Base (light pavement structures)

SANS 10120-4 MFL

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedules of quantities Section MFL: Base (light pavement structures)

SANS 10120-5 MFL

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MFL: Base (light pavement structures)

SANS 10120-4 M

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section M: Roads (general)

SANS 4778

Chain slings of welded construction - Grades M(4), S(6) and T(8)

NRS 033

Electricity distribution - Guidelines for the application design, planning and construction of medium voltage overhead power lines up to and including 22 kV, using wooden pole structures and bare conductors

SANS 10082

Timber frame buildings

SANS 10299-2

Development, maintenance and management of groundwater resources Part 2: The design, construction and drilling of boreholes

SANS 60839-2-7

Alarm systems Part 2: Requirements for intruder alarm systems Section 7: Passive glass-break detectors for use in buildings

SANS 717-1

Acoustics - Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation

SANS 717-2

Acoustics - Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation

SANS 10563

Building construction - Sealants - Determination of change in mass and volume

SANS 10590

Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water

SANS 140-8

Acoustics - Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor

SANS 4994

Design and construction of vessels and tanks in reinforced plastics

SANS 1200 HC

Standardized specification for civil engineering construction Section HC: Corrosion protection of structural steelwork

SANS 140-4

Acoustics - Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms

SANS 1845

Prefinished sheet metal products for interior and exterior building applications

SANS 140-5

Acoustics - Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of facade elements and facades

SANS 140-7

Acoustics - Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors

SANS 8339

Building construction - Jointing products - Sealants - Determination of tensile properties

SANS 8340

Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension

SANS 7211-2

Textiles - Woven fabrics - Construction - Methods of analysis Part 2: Determination of number of threads per unit length

SANS 7211-3

Textiles - Woven fabrics - Construction - Methods of analysis Part 3: Determination of crimp of yarn in fabric

SANS 7211-4

Textiles - Woven fabrics - Construction - Methods of analysis Part 4: Determination of twist in yarn removed from fabric

SANS 7211-5

Textiles - Woven fabrics - Construction - Methods of analysis Part 5: Determination of linear density of yarn removed from fabric

SANS 10252-1

Water supply and drainage for buildings Part 1: Water supply installations for buildings

SANS 60598-2-25

Luminaires Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings

SANS 1381-4

Materials for thermal insulation of buildings Part 4: Reflective foil laminates (rolls, sheets and sections)

SANS 50081-2

Safety rules for the construction and installation of lifts Part 2: Hydraulic lifts

SANS 11120

Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3 000 l - Design, construction and testing

SANS 7866

Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing

SANS 10145

Concrete masonry construction

SANS 61558-2-23

Safety of transformers, reactors, power supply units and combinations thereof Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites

SANS 51808

Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests

SANS 1669-1

Conveyor belt pulleys Part 1: Pulley types, construction and dimensions

SANS 11527

Building construction - Sealants - Test method for the determination of stringiness

SANS 971

Conveyor belting - Methods of testing fire retardant properties of all conveyor belt constructions

SANS 1375

Textile floor coverings (pile construction)

SANS 10120-5 M

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section M: Roads (general)

SANS 10137

The installation of glazing in buildings

SANS 60034-7

Rotating electrical machines Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

SANS 1415

Textile floor coverings (needle-punched construction)

SANS 1700-2-7

Fasteners Part 2: Screw threads Section 7: ISO general purpose metric screw threads - Tolerances - Deviations for constructional screw threads

SANS 9809-3

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 3: Normalized steel cylinders

SANS 9809-2

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa

SANS 9809-1

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa

SANS 10396

Implementing preferential construction procurement policies using targeted procurement procedures

SANS 1914-1

Targeted construction procurement Part 1: Participation of targeted enterprises

SANS 1914-2

Targeted construction procurement Part 2: Participation of targeted partners in joint ventures

SANS 1914-3

Targeted construction procurement Part 3: Participation of targeted enterprises and targeted partners in joint ventures

SANS 1914-4

Targeted construction procurement Part 4: Participation of targeted enterprises and targeted labour (local resources)

SANS 1914-5

Targeted construction procurement Part 5: Participation of targeted labour

SANS 1914-6

Targeted construction procurement Part 6: Participation of targeted enterprises in concession contracts

SANS 1936-3

Development of dolomite land Part 3: Design and construction of buildings, structures and infrastructure

CKS 411

Elastic-sided chelsea boots (Goodyear welted construction) (Metric units)

SANS 2001-BE1

Construction works Part BE1: Earthworks (general)

SANS 2001-BS1

Construction works Part BS1: Site clearance

SANS 10403

Formatting and compilation of construction procurement documents

SANS 1921-1

Construction and management requirements for works contracts Part 1: General engineering and construction works

SANS 50868-5

Packaging for terminally sterilized medical devices Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

SANS 10209

The design and construction of private swimming pools

SANS 14644-4

Cleanrooms and associated controlled environments Part 4: Design, construction and start-up

SANS 1545-5

Safety rules for the construction and installation of lifts Part 5: Electric and hydraulic access, goods only lifts

SANS 1545-9

Safety rules for the construction and installation of lifts Part 9: Lift landing doors - Fire resistance testing

SANS 8662-5

Hand-held portable power tools - Measurement of vibrations at the handle Part 5: Pavement breakers and hammers for construction work

SANS 50081-1

Safety rules for the construction and installation of lifts Part 1: Electric lifts

SANS 10120 SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents. (All parts included. Only available as hardcopy or CD-ROM)

SANS 1921-2

Construction and management requirements for works contracts Part 2: Accommodation of traffic on public roads occupied by the contractor

SANS 1921-3

Construction and management requirements for works contracts Part 3: Structural steelwork

SANS 207

The design and construction of reinforced soils and fills

SANS 2001-CS1

Construction works Part CS1: Structural steelwork

SANS 2001-CG1

Construction works Part CG1: Installation of glazing in window and door frames

SANS 10400-C

The application of the National Building Regulations Part C: Dimensions

SANS 10400-F

The application of the National Building Regulations Part F: Site operations

SANS 10400-J

The application of the National Building Regulations Part J: Floors

SANS 10400-N

The application of the National Building Regulations Part N: Glazing

SANS 10400-P

The application of the National Building Regulations Part P: Drainage

SANS 10400-V

The application of the National Building Regulations Part V: Space heating

SANS 278

Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face mask, half mask or quarter mask - Requirements, testing, marking

SANS 51835

Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking

SANS 7675

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)

SANS 294

Construction procurement processes, methods and procedures

SANS 1921-4

Construction and management requirements for works contracts Part 4: Third-party management support in works contracts

SANS 1921-5

Construction and management requirements for works contracts Part 5: Earthworks activities which are to be performed by hand

SANS 50081-70

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods lifts Part 70: Accessibility to lifts for persons including persons with disability

ISO 21542:2011

Building construction -- Accessibility and usability of the built environment

SANS 60079-1A

Electrical apparatus for explosive gas atmospheres Part 1A: Construction and verification test of flameproof enclosures of electrical apparatus First supplement to SABS IEC 60079-1 Appendix D: Method of test for ascertainment of maximum experimental safe gap

SANS 10218-1

Acoustical properties of buildings Part 1: Grading criteria for the airborne sound insulation properties of buildings

SANS 10218-2

Acoustical properties of buildings Part 2: The assessment of building plans and buildings with respect to their acoustical properties

SANS 1921-6

Construction and management requirements for works contracts Part 6: HIV/AIDS awareness

SANS 10177-8

Fire testing of materials, components and elements used in buildings Part 8: Surface burning characteristics of building materials

SANS 364

Shipbuilding and marine structures - Bearings for derrick goosenecks - Assemblies and components

SANS 8314

Shipbuilding and marine structures - Trunnion pieces for span bearings and lead block bearings

SANS 10021

The waterproofing of buildings (including damp-proofing and vapour barrier installation)

SANS 2220-1-6

Electrical security systems Part 1.6: Intruder alarm systems - Passive glass-break detectors for use in buildings

SANS 60439-4

Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS)

SANS 10279

The rebuilding of automotive gearboxes

SANS 10255

Health, safety and environmental guidelines for the construction and operation of timber treatment plants

SANS 10155

Accuracy in buildings

SANS 50443

Helmets for fire fighting in buildings and other structures

SANS 399

Transportable refillable welded stainless steel cylinders for low pressure gases - Alternative design and construction

SANS 50081-72

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts Part 72: Firefighters lifts

SANS 50081-80

Safety rules for the construction and installation of lifts - Existing lifts Part 80: Rules for the improvement of safety of existing passenger and goods lifts

SANS 140-14

Acoustics - Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field

SANS 50081-3

Safety rules for the construction and installation of lifts Part 3: Electric and hydraulic service lifts

SANS 11601

Wheeled fire extinguishers - Performance and construction

SANS 2001-EM1

Construction works Part EM1: Cement plaster

SANS 10177-7

Fire testing of materials, components and elements used in buildings Part 7: Fire test for fire-check properties of building elements

SANS 10177-6

Fire testing of materials, components and elements used in buildings Part 6: Non-combustibility at 300 ?C of electrical insulation materials

SANS 10177-4

Fire testing of materials, components and elements used in buildings Part 4: Surface fire index of floor coverings

SANS 10177-3

Fire-testing of materials, components and elements used in buildings Part 3: Surface fire index of finishing materials

SANS 10177-2

Fire testing of materials, components and elements used in buildings Part 2: Fire resistance test for building elements

SANS 10177-1

Fire testing of materials, components and elements used in buildings Part 1: General introduction to the methods of test

SANS 10124

The application of soil insecticides for the protection of buildings

SANS 11431

Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass

SANS 10407

Thatched roof construction

SANS 2001-CM1

Construction works Part CM1: Masonry walling

SANS 1545-6

Safety rules for the construction and installation of lifts Part 6: Rack-and-pinion lifts

SANS 2001-CT1

Construction works Part CT1: Structural timberwork (flooring)

SANS 140-11

Acoustics - Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors

SANS 10305-1

Painting of buildings Part 1: Paint and paint selection

SANS 10305-2

Painting of buildings Part 2: Paint application and defects

SANS 10305-3

Painting of buildings Part 3: Paint types

SANS 10305-4

Painting of buildings Part 4: Painting of walls, ceilings and cladding

SANS 10305-5

Painting of buildings Part 5: Painting of roofs and steel structures

SANS 10305-6

Painting of buildings Part 6: Painting of wood

SANS 2001-DP1

Construction works Part DP1: Earthworks for buried pipelines and prefabricated culverts

SANS 10177-9

Fire testing of materials, components and elements used in buildings Part 9: Small-scale burning characteristics of building materials: ignition, flame spread and heat contribution

SANS 50280

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

SANS 10080

The rodentproofing of buildings

SANS 2001-CC1

Construction works Part CC1: Concrete works (structural)

SANS 2001-CC2

Construction works Part CC2: Concrete works (minor works)

SANS 50572-1

Glass in building - Basic soda lime silicate glass products Part 1: Definitions and general physical and mechanical properties

SANS 50572-2

Glass in building - Basic soda lime silicate glass products Part 2: Float glass

SANS 50572-3

Glass in building - Basic soda lime silicate glass products Part 3: Polished wire glass

SANS 50572-4

Glass in building - Basic soda lime silicate glass products Part 4: Drawn sheet glass

SANS 50572-5

Glass in building - Basic soda lime silicate glass products Part 5: Patterned glass

SANS 10340-1

Installation of telecommunication cables Part 1: Fibre optic cable in buildings

SANS 486

Conveyor belting - Finger splicing of solid woven construction conveyor belting

SANS 6971

Cranked-link drag chains of welded construction, attachments and sprockets

SANS 6972

Cranked-link mill chains of welded construction, attachments and sprockets

ISO 384:1978

Laboratory glassware -- Principles of design and construction of volumetric glassware

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 1545-3

Safety rules for the construction and installation of lifts Part 3: Lifts for persons with disabilities (stairlifting platforms)

SANS 1545-4

Safety rules for the construction and installation of lifts Part 4: Lifts for persons with disabilities (vertical lifting platforms)

SANS 1200 (ALL PARTS)

Standardized specification for civil engineering construction. (All parts included. Only available as hardcopy or CD-ROM)

ISO 1040:1983

Building construction -- Modular coordination -- Multimodules for horizontal coordinating dimensions

SANS 6946

Building components and building elements - Thermal resistance and thermal transmittance - Calculation method

SANS 1263-1

Safety and security glazing materials for buildings Part 1: Safety performance of glazing materials under human impact

SANS 10139

Fire detection and alarm systems for buildings - System design, installation and servicing

SANS 7682

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)

SANS 1545-7

Safety rules for the construction and installation of lifts Part 7: Electric and hydraulic service lifts (dumb waiters)

SANS 517

Light steel frame building

SANS 21003-2

Multilayer piping systems for hot and cold water installations inside buildings Part 2: Pipes

SANS 53280

Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water

SANS 21003-1

Multilayer piping systems for hot and cold water installations inside buildings Part 1: General

SANS 21003-3

Multilayer piping systems for hot and cold water installations inside buildings Part 3: Fittings

SANS 11527

Building construction - Sealants - Test method for the determination of stringiness

SANS 13590

Small craft - Personal watercraft - Construction and system installation requirements

SANS 1903

Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests

SANS 21003-5

Multilayer piping systems for hot and cold water installations inside buildings Part 5: Fitness for purpose of the system

SANS 12215-1

Small craft - Hull construction and scantlings Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate

SANS 12215-2

Small craft - Hull construction and scantlings Part 2: Materials: Core materials for sandwich construction, embedded materials

SANS 12215-3

Small craft - Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials

SANS 12215-4

Small craft - Hull construction and scantlings Part 4: Workshop and manufacturing

SANS 1381-2

Materials for thermal insulation of buildings Part 2: Loose fill thermal insulation material

SANS 1381-1

Materials for thermal insulation of buildings Part 1: Fibre thermal insulation mats

SANS 1263-3

Safety and security glazing materials for buildings Part 3: Bullet-resistant glazing materials

SANS 1263-2

Safety and security glazing materials for buildings Part 2: Burglar-resistant and vandal-resistant glazing materials

SANS 7389

Building construction - Jointing products - Determination of elastic recovery

SANS 7390

Building construction - Jointing products - Determination of resistance to flow

SANS 204-1

Energy efficiency in buildings Part 1: General requirements

SANS 204-2

Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control

SANS 204-3

Energy efficiency in buildings Part 3: The application of the energy efficiency requirements for buildings with artificial ventilation or air conditioning

SANS 10456

Building materials and products - Procedures for determining declared and design thermal values

SANS 11820

Reaction to fire tests for building products - Non-combustibility test

SANS 428

Fire performance classification of thermal insulated building envelope systems

SANS 10177-5

Fire testing of materials, components and elements used in buildings Part 5: Non-combustibility at 750 ?C of building materials

SANS 10177-10

Fire testing of materials, components and elements used in buildings Part 10: Surface burning characteristics of building materials using the inverted channel tunnel test

SANS 10177-11

Fire testing of materials, components and elements used in buildings Part 11: Large-scale fire performance evaluation of building envelope thermal insulation systems (with or without sprinklers)

SANS 1518

Transport of dangerous goods - Design, construction, testing, approval and maintenance of road vehicles and portable tanks

SANS 10160-1

Basis of structural design and actions for buildings and industrial structures Part 1: Basis of structural design

SANS 10160-2

Basis of structural design and actions for buildings and industrial structures Part 2: Self-weight and imposed loads

SANS 10160-3

Basis of structural design and actions for buildings and industrial structures Part 3: Wind actions

SANS 10160-4

Basis of structural design and actions for buildings and industrial structures Part 4: Seismic actions and general requirements for buildings

SANS 10160-5

Basis of structural design and actions for buildings and industrial structures Part 5: Basis for geotechnical design and actions

SANS 10160-6

Basis of structural design and actions for buildings and industrial structures Part 6: Actions induced by cranes and machinery

SANS 10160-7

Basis of structural design and actions for buildings and industrial structures Part 7: Thermal actions

SANS 10160-8

Basis of structural design and actions for buildings and industrial structures Part 8: Actions during execution

SANS 190-2

Expanded metal Part 2: Building products

SANS 13638

Building construction - Sealants - Determination of resistance to prolonged exposure to water

SANS 13640

Building construction - Jointing products - Specifications for test substrates

NRS 092

Electricity distribution - Guideline for the construction of medium-voltage overhead power lines of up to and including 22 kV, using poles with bare and aerial bundled conductors

SANS 1536

Building construction - Sealants - Determination of resistance to compression

SANS 60079-35-1

Explosive atmospheres Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

SANS 10052

The construction of strongrooms

SANS 1305

Sealing compounds for the building industry, one-component, silicone-rubber-base

SANS 1077

Sealing compounds for the building and construction industry, two-component, polyurethane-base

SANS 5419

Pesticides - Evaluation of rodentproofness of building materials and constructions

SANS 1545-1

Safety rules for the construction and installation of lifts Part 1: Electric lifts

SANS 1545-2

Safety rules for the construction and installation of lifts Part 2: Hydraulic lifts

SANS 8770

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)

SANS 2001-DP2

Construction works Part DP2: Medium pressure pipelines

SANS 2001-DP4

Construction works Part DP4: Sewers

SANS 829

Performance standards in building - Contents and presentation

SANS 830

Performance standards in building - Principles for their preparation and factors to be considered

SANS 831-1

Building construction - Expression of users' requirements Part 1: Thermal requirements

SANS 831-2

Building construction - Expression of users' requirements Part 2: Air purity requirements

SANS 831-3

Building construction - Expression of users' requirements Part 3: Acoustical requirements

SANS 2001-CT2

Construction works Part CT2: Structural timberwork (roofing)

SANS 12215-5

Small craft - Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination

SANS 12215-6

Small craft - Hull construction and scantlings Part 6: Structural arrangements and details

SANS 21-1

Safety of escalators and moving walks Part 1: Construction and installation

SANS 2001-DP5

Construction works Part DP5: Stormwater drainage

SANS 11431

Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass

SANS 1783-2

Sawn softwood timber Part 2: Stress-graded structural timber and timber for frame wall construction

CKS 344

Orthopaedic boots (Goodyear welted construction)

SANS 993

Modular co-ordination in building

SANS 523

Limes for use in building

SANS 12215-8

Small craft - Hull construction and scantlings Part 8: Rudders

SANS 13370

Thermal performance of buildings - Heat transfer via the ground - Calculation methods

SANS 23045

Building environment design - Guidelines to assess energy efficiency of new buildings

SANS 16938-2

Building construction - Determination of the staining of porous substrates by sealants used in joints Part 2: Test without compression

ISO 11117:2008

Gas cylinders -- Valve protection caps and valve guards -- Design, construction and tests

SANS 13638

Building construction - Sealants - Determination of resistance to prolonged exposure to water

SANS 20052

Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction

SANS 20036

Uniform provisions concerning the approval of large passenger vehicles with regard to their general construction

SANS 20107

Uniform provisions concerning the approval of category M2 or M3 vehicles with regard to their general construction

SANS 1492-1

Men's shoes with stuck-on outer soles Part 1: Flat lasted construction

SANS 1492-2

Men's shoes with stuck-on outer soles Part 2: California type construction

SANS 1492-3

Men's shoes with stuck-on outer soles Part 3: Moccasin type construction

SANS 422

Hospital nurses' shoes (Goodyear welted construction)

SANS 16818

Building environment design - Energy efficiency - Terminology

ISO 2912:1973

Modular units for machine tool construction -- Multi-spindle heads -- Casing and input drive shaft dimensions

SANS 20069

Uniform provisions concerning the approval of rear marking plates for slow-moving vehicles (by construction) and their trailers

SANS 50081-21

Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods Part 21: New passenger and goods passenger lifts in existing building

ISO 2562:1973

Modular units for machine tool construction -- Slide units

SANS 10329

The design and construction of sectional steel tanks for storage of liquids at or above ground level

ISO 11886:2002

Building construction machinery and equipment -- Pile driving and extracting equipment -- Terminology and commercial specifications

SANS 60839-2-3

Alarm systems Part 2: Requirements for intruder alarm systems Section Three: Requirements for infrared-beam interruption detectors in buildings

SANS 60839-2-4

Alarm systems Part 2: Requirements for intruder alarm systems Section 4: Ultrasonic Doppler detectors for use in buildings

SANS 60839-2-5

Alarm systems Part 2: Requirements for intruder alarm systems Section 5: Microwave Doppler detectors for use in buildings

SANS 60839-2-6

Alarm systems Part 2: Requirements for intruder alarm systems Section 6: Passive infra-red detectors for use in buildings

SANS 4898

Rigid cellular plastics - Thermal insulation products for buildings - Specifications

SANS 1072

Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations

SANS 12968

Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)

SANS 13788

Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods

SANS 13792

Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods

SANS 29803

Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)

SANS 29804

Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

SANS 51253-1

Gullies for buildings Part 1: Requirements

SANS 51253-2

Gullies for buildings Part 2: Test methods

SANS 51253-3

Gullies for buildings Part 3: Quality control

SANS 51253-4

Gullies for buildings Part 4: Access covers

SANS 51253-5

Gullies for buildings Part 5: Gullies with light liquids closure

SANS 52056-1

Gravity drainage systems inside buildings Part 1: General and performance requirements

SANS 52056-2

Gravity drainage systems inside buildings Part 2: Sanitary pipework, layout and calculation

SANS 52056-3

Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation

SANS 52056-4

Gravity drainage systems inside buildings Part 4: Wastewater lifting plants - Layout and calculation

SANS 52056-5

Gravity drainage systems inside buildings Part 5: Installation and testing, instructions for operation, maintenance and use

SANS 50752

Drain and sewer systems outside buildings

ISO 10845-7:2011

Construction procurement -- Part 7: Participation of local enterprises and labour in contracts

ISO 10845-8:2011

Construction procurement -- Part 8: Participation of targeted labour in contracts

ISO 387:1977

Hydrometers -- Principles of construction and adjustment

SANS 10400-A

The application of the National Building Regulations Part A: General principles and requirements

SANS 2001-DP6

Construction works Part DP6: Below-ground water installations

SANS 2001-DP3

Construction works Part DP3: Cable ducts

ISO 20727:2004

Textile machinery -- Mixing bale openers for cotton spinning -- Vocabulary and principles of construction

SANS 50331

Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings

SANS 14683

Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values

SANS 530-9

Fire detection and fire alarm systems for buildings Part 9: Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems

ISO 10845-2:2011

Construction procurement -- Part 2: Formatting and compilation of procurement documentation

SANS 10400-D

The application of the National Building Regulations Part D: Public safety

SANS 10400-G

The application of the National Building Regulations Part G: Excavations

SANS 10400-O

The application of the National Building Regulations Part O: Lighting and ventilation

ISO 9048:1987

Building construction -- Jointing products -- Determination of extrudability of sealants using standardized apparatus

ISO 11431:2002

Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass

ISO 18650-1:2004

Building construction machinery and equipment -- Concrete mixers -- Part 1: Vocabulary and general specifications

ISO 20703:2006

Gas cylinders -- Refillable welded aluminium-alloy cylinders -- Design, construction and testing

ISO 15143-1:2010

Earth-moving machinery and mobile road construction machinery -- Worksite data exchange -- Part 1: System architecture

ISO 21873-1:2008

Building construction machinery and equipment -- Mobile crushers -- Part 1: Terminology and commercial specifications

ISO 21538:2004

Blanks for superabrasive cutting-off wheels -- Mounting and fixing bores -- Building construction and civil engineering

ISO 13527:2010

Space data and information transfer systems -- XML formatted data unit (XFDU) structure and construction rules

ISO 7518:1983

Technical drawings -- Construction drawings -- Simplified representation of demolition and rebuilding

SANS 952-1

Polymer film for damp-proofing and waterproofing in buildings Part 1: Monofilament and co-extruded products

SANS 10400-W

The application of the National Building Regulations Part W: Fire installation

ISO 8662-5:1992

Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 5: Pavement breakers and hammers for construction work

ISO 14890:2003

Conveyor belts -- Specification for rubber or plastics covered conveyor belts of textile construction for general use

ISO 19452:2008

Building construction machinery and equipment -- Pedestrian-controlled vibratory (percussion) rammers -- Terminology and commercial specifications

SANS 10400-T

The application of the National Building Regulations Part T: Fire protection

SANS 2001-CM2

Construction works Part CM2: Strip footings, pad footings and slab-on-the-ground foundations for masonry walling

SANS 10400-Q

The application of the National Building Regulations Part Q: Non-water-borne means of sanitary disposal

SANS 968

Conveyor belting - Textile reinforced solid woven carcass construction

SANS 10400-K

The application of the National Building Regulations Part K: Walls

SANS 952-2

Polymer film for damp-proofing and waterproofing in buildings Part 2: Laminated (non-woven) products

SANS 21003-7

Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity

SANS 21307

Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

IEC 62598

Nuclear instrumentation - Constructional requirements and classification of radiometric gauges

ISO 18651-1:2011

Building construction machinery and equipment -- Internal vibrators for concrete -- Part 1: Terminology and commercial specifications

SANS 10400-M

The application of the National Building Regulations Part M: Stairways

SANS 10400-S

The application of the National Building Regulations Part S: Facilities for persons with disabilities

ISO 21307:2011

Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

IEC 60079-35-1

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

SANS 1203

Building construction - Jointing products - Determination of resistance to flow of sealants

SANS 1204

Building construction - Sealants - Determination of tensile properties (Extension to break)

SANS 1205

Building construction - Sealants - Determination of tensile properties at maintained extension

SANS 1220

Building construction - Jointing products - Classification and requirements for sealants

SANS 1226

Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature

SANS 2444

Joints in building - Vocabulary

SANS 6927

Building construction - Jointing products - Sealants - Vocabulary

SANS 8394-1

Building construction - Jointing products Part 1: Determination of extrudability of sealants

SANS 8394-2

Building construction - Jointing products Part 2: Determination of extrudability of sealants using standardized apparatus

SANS 1202

Building construction - Jointing products - Determination of elastic recovery of sealants

SANS 11600

Building construction - Sealants - Classification and requirements

SANS 3001-AG20

Civil engineering test methods Part AG20: Determination of the bulk density, apparent density and water absorption of aggregate particles retained on the 5 mm sieve for road construction materials

SANS 3001-AG21

Civil engineering test methods Part AG21: Determination of the bulk density, apparent density and water absorption of aggregate particles passing the 5 mm sieve for road construction materials

SANS 10400-XA

The application of the National Building Regulations Part X: Environmental sustainability Part XA: Energy usage in buildings

SANS 204

Energy efficiency in buildings

ISO 11513:2011

Gas cylinders -- Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) -- Design, construction, testing, use and periodic inspection

ISO 21929-1:2011

Sustainability in building construction -- Sustainability indicators -- Part 1: Framework for the development of indicators and a core set of indicators for buildings

IEC 61730-1-am1

Amendment 1 - Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

SANS 10400-L

The application of the National Building Regulations Part L: Roofs

SANS 2001-DP8

Construction works Part DP8: Pipe jacking

SANS 2631-2

Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration Part 2: Vibration in buildings (1 Hz to 80 Hz)

SANS 8559

Garment construction and anthropometric surveys - Body dimensions

ISO 18944:2012

Imaging materials -- Reflection colour photographic prints -- Test print construction and measurement

ISO 387:1977

Hydrometers -- Principles of construction and adjustment

ISO 387:1977

Hydrometers -- Principles of construction and adjustment

SANS 952

Polyolefin film for damp- and waterproofing in buildings

ISO 21307:2009

Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

SANS 278

Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face mask, half mask or quarter mask - Requirements, testing, marking

SANS 10073

The safe application of masonry-type facings to buildings

SANS 51835

Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking

ISO 5843-1:1985

Aerospace construction -- List of equivalent terms -- Part 1: Aerospace electrical equipment

ISO 387:1977

Hydrometers -- Principles of construction and adjustment

SANS 4898

Rigid cellular plastics - Thermal insulation products for buildings - Specifications

ISO 386:1977

Liquid-in-glass laboratory thermometers -- Principles of design, construction and use

SANS 10160

The general procedures and loadings to be adopted in the design of buildings

ISO 386:1977

Liquid-in-glass laboratory thermometers -- Principles of design, construction and use

SANS 10246

Accessibility of buildings to disabled persons

SANS 9046

Building construction - Sealants - Determination of adhesion/cohesion properties at constant temperature

SANS 9047

Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures

SANS 204-3

Energy efficiency in buildings Part 3: The application of the energy efficiency requirements for buildings with artificial ventilation or air conditioning

SANS 204-1

Energy efficiency in buildings Part 1: General requirements

SANS 204-2

Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control

ISO 12215-9:2012

Small craft -- Hull construction and scantlings -- Part 9: Sailing craft appendages

ISO 16331-1:2012

Optics and optical instruments -- Laboratory procedures for testing surveying and construction instruments -- Part 1: Performance of handheld laser distance meters

ISO/TR 834-3:2012

Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 10400-B

The application of the National Building Regulations Part B: Structural design

SANS 10400-H

The application of the National Building Regulations Part H: Foundations

SANS 10400-R

The application of the National Building Regulations Part R: Stormwater disposal

SANS 1936-3

Development of dolomite land Part 3: Design and construction of buildings, structures and infrastructure

SANS 10120-2 TO 5 DB SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section DB: Earthworks (pipe trenches)

SANS 10120-2 TO 5 DE SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section DE: Small earth dams

SANS 10120-2 TO 5 DK SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section DK: Gabions and pitching

SANS 10120-2 TO 5 DM SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section DM: Earthworks (roads, subgrade)

SANS 10120-2 TO 5 DN SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section DN: Earthworks (railway sidings)

SANS 10120-2 TO 5 F SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section F: Piling

SANS 10120-2 TO 5 G SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section G: Concrete (structural)

SANS 10120-2 TO 5 GA SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section GA: Concrete (small works)

SANS 10400-B

The application of the National Building Regulations Part B: Structural design

SANS 10400-H

The application of the National Building Regulations Part H: Foundations

SANS 10400-R

The application of the National Building Regulations Part R: Stormwater disposal

SANS 10120-2 TO 5 GB SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section GB: Concrete (ordinary buildings)

SANS 1936-3

Development of dolomite land Part 3: Design and construction of buildings, structures and infrastructure

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 10120-2 TO 5 GE SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section GE: Precast concrete (structural)

SANS 10120-2 TO 5 GF SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section GF: Prestressed concrete

SANS 10120-2 TO 5 H SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section H: Structural steelwork

SANS 10120-2 TO 5 HA SET

Code of practice or use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section HA: Structural steelwork (sundry items)

SANS 10120-2 TO 5 HB SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section HB: Cladding and sheeting

SANS 10120-2 TO 5 HC SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section HC: Corrosion protection of structural steelwork

SANS 10400-B

The application of the National Building Regulations Part B: Structural design

SANS 10400-H

The application of the National Building Regulations Part H: Foundations

SANS 10400-R

The application of the National Building Regulations Part R: Stormwater disposal

SANS 1936-3

Development of dolomite land Part 3: Design and construction of buildings, structures and infrastructure

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 10120-2 TO 5 HE SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section HE: Structural aluminiumwork

SANS 10120-2 TO 5 INT SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Introduction

SANS 10120-2 TO 5 L SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section L: Medium-pressure pipelines

SANS 10120-2 TO 5 LB SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section LB: Bedding (pipes)

SANS 10120-2 TO 5 LC SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section LC: Cable ducts

SANS 10120-2 TO 5 LD SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section LD: Sewers

SANS 10120-2 TO 5 LE SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section LE: Stormwater drainage

SANS 10400-B

The application of the National Building Regulations Part B: Structural design

SANS 10400-H

The application of the National Building Regulations Part H: Foundations

SANS 10400-R

The application of the National Building Regulations Part R: Stormwater disposal

SANS 10401

The construction of dwelling houses in accordance with the National Building Regulations

SANS 1936-3

Development of dolomite land Part 3: Design and construction of buildings, structures and infrastructure

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 10120-2 TO 5 LF SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section: LF

SANS 10120-2 TO 5 LG SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section LG: Pipe jacking

SANS 10120-2 TO 5 M SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section M: Roads (general)

SANS 10120-2 TO 5 ME SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section ME: Subbase

SANS 10120-2 TO 5 MF SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section MF: Base

SANS 10120-2 TO 5 MFL SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section MFL: Base (light pavement structures)

SANS 10120-2 TO 5 MG SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section MG: Bituminous surface treatment

SANS 10120-2 TO 5 MH SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section MH: Asphalt base and surfacing

SANS 10120-2 TO 5 MJ SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section MJ: Segmented paving

SANS 10120-2 TO 5 MK SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section MK: Kerbing and channelling

SANS 10120-2 TO 5 MM SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section MM: Ancillary roadworks

SANS 10400-B

The application of the National Building Regulations Part B: Structural design

SANS 10400-H

The application of the National Building Regulations Part H: Foundations

SANS 10400-R

The application of the National Building Regulations Part R: Stormwater disposal

SANS 1545-10

Safety rules for the construction and installation of lifts Part 10: Testing and inspection documents for lifts

SANS 1936-3

Development of dolomite land Part 3: Design and construction of buildings, structures and infrastructure

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 10120-2 TO 5 NB SET

Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5 Section NB: Railway sidings (trackwork)

SANS 10400-B

The application of the National Building Regulations Part B: Structural design

SANS 10400-H

The application of the National Building Regulations Part H: Foundations

SANS 10400-R

The application of the National Building Regulations Part R: Stormwater disposal

SANS 1936-3

Development of dolomite land Part 3: Design and construction of buildings, structures and infrastructure

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 21

Safety rules for the construction and installation of escalators and passenger conveyors

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 1536

Building construction - Sealants - Determination of resistance to compression

SANS 16938-2

Building construction - Determination of the staining of porous substrates by sealants used in joints Part 2: Test without compression

SANS 60079-35-1

Explosive atmospheres Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

SANS 13640

Building construction - Jointing products - Specifications for test substrates

SANS 10591

Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water

SANS 16938-1

Building construction - Determination of the staining of porous substrates by sealants used in joints Part 1: Test with compression

SANS 2001-BE3

Construction works Part BE3: Repair of sinkholes and subsidences in dolomite land

SANS 10400 (ALL PARTS) A4

The application of the National Building Regulations

SANS 10400 (ALL PARTS) CD

The application of the National Building Regulations

SANS 10400 (ALL PARTS) A4

The application of the National Building Regulations

SANS 10400 (ALL PARTS) CD

The application of the National Building Regulations

SANS 10400-B

The application of the National Building Regulations Part B: Structural design

SANS 10400-H

The application of the National Building Regulations Part H: Foundations

SANS 10400-R

The application of the National Building Regulations Part R: Stormwater disposal

IEC 61439-4

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

IEC 61730-1-am2

Amendment 2 - Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

SANS 20492-3

Glass in buildings - Insulating glass Part 3: Gas concentration and gas leakage

SANS 20492-4

Glass in buildings - Insulating glass Part 4: Methods of test for the physical attributes of edge seals

SANS 1393

Construction management systems - Requirements

SANS 2001 (ALL PARTS)

Construction Works. Only available as hardcopy or CD-ROM)