Page Header

Energy Efficiency - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the specific Energy Efficiency standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Energy Efficiency Industry. This scheme provides the Accessibility & Disability components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 11451-3:2007

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation

ISO 3741:2010

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for reverberation test rooms

ISO 9005:2007

Nuclear energy -- Uranium dioxide powder and sintered pellets -- Determination of oxygen/uranium atomic ratio by the amperometric method

ISO 11451-2:2005

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources

ISO 11451-4:2006

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

ISO 11452-7:2003

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection

ISO 12625-4:2005

Tissue paper and tissue products -- Part 4: Determination of tensile strength, stretch at break and tensile energy absorption

ISO 6962:2004

Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste

ISO 16796:2004

Nuclear energy -- Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES)

ISO 11452-8:2007

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fields

ISO 6980-3:2006

Nuclear energy -- Reference beta-particle radiation -- Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence

ISO 11554:2006

Optics and photonics -- Lasers and laser-related equipment -- Test methods for laser beam power, energy and temporal characteristics

ISO 7176-4:2008

Wheelchairs -- Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range

ISO 15112:2007

Natural gas -- Energy determination

ISO 22875:2008

Nuclear energy -- Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets

ISO 9278:2008

Nuclear energy - Uranium dioxide pellets -- Determination of density and volume fraction of open and closed porosity

ISO 16818:2008

Building environment design -- Energy efficiency -- Terminology

ISO 15927-4:2005

Hygrothermal performance of buildings -- Calculation and presentation of climatic data -- Part 4: Hourly data for assessing the annual energy use for heating and cooling

ISO 13790:2008

Energy performance of buildings -- Calculation of energy use for space heating and cooling

ISO 9463:2009

Nuclear energy -- Nuclear fuel technology -- Determination of plutonium in nitric acid solutions by spectrophotometry

ISO 6469-1:2009

Electrically propelled road vehicles -- Safety specifications -- Part 1: On-board rechargeable energy storage system (RESS)

ISO 23045:2008

Building environment design -- Guidelines to assess energy efficiency of new buildings

ISO 11451-1:2005

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

ISO 23828:2008

Fuel cell road vehicles - Energy consumption measurement -- Vehicles fuelled with compressed hydrogen

ISO 11452-4:2005

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

ISO 15472:2010

Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales

ISO 3743-1:2010

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for small movable sources in reverberant fields -- Part 1: Comparison method for a hard-walled test room

ISO 3744:2010

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for an essentially free field over a reflecting plane

ISO 10276:2010

Nuclear energy -- Fuel technology -- Trunnions for packages used to transport radioactive material

IEC 61427

Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test

IEC 62053-21

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

IEC 62053-22

Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

ISO 11452-1:2005

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

ISO 11254-3:2006

Lasers and laser-related equipment -- Determination of laser-induced damage threshold of optical surfaces -- Part 3: Assurance of laser power (energy) handling capabilities

ISO 1709:1995

Nuclear energy -- Fissile materials -- Principles of criticality safety in storing, handling and processing

ISO 25217:2009

Adhesives -- Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens

ISO 11452-11:2010

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 11: Reverberation chamber

ISO 7503-3:1996

Evaluation of surface contamination -- Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (E bÍtamax less than 0,15 MeV)

ISO 3002-4:1984

Basic quantities in cutting and grinding -- Part 4: Forces, energy, power

ISO 7308:1987

Road vehicles -- Petroleum-based brake-fluid for stored-energy hydraulic brakes

ISO 7503-1:1988

Evaluation of surface contamination -- Part 1: Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters

ISO 7753:1987

Nuclear energy -- Performance and testing requirements for criticality detection and alarm systems

ISO 9059:1990

Solar energy -- Calibration of field pyrheliometers by comparison to a reference pyrheliometer

ISO 9060:1990

Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation

ISO 921:1997

Nuclear energy -- Vocabulary

ISO 9488:1999

Solar energy -- Vocabulary

ISO 9553:1997

Solar energy -- Methods of testing preformed rubber seals and sealing compounds used in collectors

ISO 9846:1993

Solar energy -- Calibration of a pyranometer using a pyrheliometer

ISO 9845-1:1992

Solar energy -- Reference solar spectral irradiance at the ground at different receiving conditions -- Part 1: Direct normal and hemispherical solar irradiance for air mass 1,5

ISO 9847:1992

Solar energy -- Calibration of field pyranometers by comparison to a reference pyranometer

ISO/TR 9901:1990

Solar energy -- Field pyranometers -- Recommended practice for use

ISO/TR 10217:1989

Solar energy -- Water heating systems -- Guide to material selection with regard to internal corrosion

ISO 4037-1:1996

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 1: Radiation characteristics and production methods

ISO 3747:2010

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering/survey methods for use in situ in a reverberant environment

ISO 13601:1998

Technical energy systems -- Structure for analysis -- Energyware supply and demand sectors

ISO 4037-2:1997

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV

ISO 4037-3:1999

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence

ISO 11452-5:2002

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline

ISO 11452-3:2001

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell

ISO 8529-3:1998

Reference neutron radiations -- Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence

ISO 15366:1999

Nuclear energy -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and dilution analysis by solvent chromatography

ISO 3746:2010

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane

ISO 10333-2:2000

Personal fall-arrest systems -- Part 2: Lanyards and energy absorbers

ISO 15382:2002

Nuclear energy -- Radiationprotection -- Procedure for radiation protection monitoring in nuclear installations for external exposure to weakly penetrating radiation, especially to beta radiation

ISO 15632:2002

Microbeam analysis -- Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors

ISO 15647:2004

Nuclear energy -- Isotopic analysis of uranium hexafluoride -- Double-standard gas-source mass spectrometric method

ISO/IEC TR 15067-3:2

Information technology -- Home Electronic Systems (HES) application model -- Part 3: Model of an energy management system for HES

ISO 15911:2000

Petroleum products -- Estimation of net specific energy of aviation turbine fuels using hydrogen content data

ISO 8754:2003

Petroleum products -- Determination of sulfur content -- Energy-dispersive X-ray fluorescence spectrometry

ISO 13600:1997

Technical energy systems -- Basic concepts

ISO 11358-2:2005

Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy

ISO 16794:2003

Nuclear energy -- Determination of carbon compounds and fluorides in uranium hexafluoride infrared spectrometry

ISO 16795:2004

Nuclear energy -- Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry

ISO 16797:2004

Nuclear energy -- Soxhlet-mode chemical durability test -- Application to vitrified matrixes for high-level radioactive waste

ISO 7195:2005

Nuclear energy -- Packaging of uranium hexafluoride (UF6) for transport

ISO 17973:2002

Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis

ISO 17974:2002

Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis

ISO 6980-2:2004

Nuclear energy -- Reference beta-particle radiation -- Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field

ISO 14850-1:2004

Nuclear energy -- Waste-packages activity measurement -- Part 1: High-resolution gamma spectrometry in integral mode with open geometry

ISO 4037-4:2004

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields

ISO 12794:2000

Nuclear energy -- Radiation protection -- Individual thermoluminescence dosemeters for extremities and eyes

ISO 8714:2002

Electric road vehicles -- Reference energy consumption and range -- Test procedures for passenger cars and light commercial vehicles

ISO 20847:2004

Petroleum products -- Determination of sulfur content of automotive fuels -- Energy-dispersive X-ray fluorescence spectrometry

ISO 20865:2002

Footwear -- Test methods for outsoles -- Compression energy

ISO 13602-1:2002

Technical energy systems -- Methods for analysis -- Part 1: General

ISO 22309:2006

Microbeam analysis -- Quantitative analysis using energy-dispersive spectrometry (EDS)

ISO 9050:2003

Glass in building -- Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors

ISO 14438:2002

Glass in building -- Determination of energy balance value -- Calculation method

ISO 13602-2:2006

Technical energy systems -- Methods for analysis -- Part 2: Weighting and aggregation of energywares

ISO 11452-2:2004

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure

ISO 6980-1:2006

Nuclear energy -- Reference beta-particle radiation -- Part 1: Methods of production

IEC 61040

Power and energy measuring detectors, instruments and equipment for laser radiation

IEC 60145

Var-hour (reactive energy) meters

IEC 61241-2-3

Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 3: Method for determining minimum ignition energy of dust/air mixtures

IEC 61263

Radiation protection instrumentation - Portable potential alpha energy meter for rapid measurements in mines

IEC 61322

Radiation protection instrumentation - Installed dose equivalent rate meters, warning assemblies and monitors for neutron radiation of energy from thermal to 15 MeV

IEC 60759-am1

Amendment 1 - Standard test procedures for semiconductor X-ray energy spectrometers

IEC/TR 60736

Testing equipment for electrical energy meters

IEC 60759

Standard test procedures for semiconductor X-ray energy spectrometers

ISO/IEC/TR 15067-3

Information technology - Home Electronic System (HES) application model - Part 3: Model of an energy management system for HES

IEC 60325

Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy >60 keV) contamination meters and monitors

IEC 60947-5-4

Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

IEC 62053-11

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

IEC 62053-23

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

IEC/TS 62257-1

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification

IEC/TS 62257-2

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 2: From requirements to a range of electrification systems

IEC/TS 61970-2

Energy management system application program interface (EMS-API) - Part 2: Glossary

IEC/TS 62257-3

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 3: Project development and management

IEC/TS 62325-502

Framework for energy market communications - Part 502: Profile of ebXML

IEC/TR 62325-501

Framework for energy market communications - Part 501: General guidelines for use of ebXML

IEC/TR 62325-102

Framework for energy market communications - Part 102: Energy market model example

IEC/TR 62325-101

Framework for energy market communications - Part 101: General guidelines

IEC/TS 62257-6

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 6: Acceptance, operation, maintenance and replacement

IEC/TS 62257-5

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 5: Protection against electrical hazards

IEC/TS 62257-4

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 4: System selection and design

IEC/TS 61970-401

Energy management system application program interface (EMS-API) - Part 401: Component interface specification (CIS) framework

IEC 62055-31

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

IEC 61970-1

Energy management system application program interface (EMS-API) - Part 1: Guidelines and general requirements

IEC 61970-501

Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF) schema

IEC/TS 62257-9-2

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-2: Microgrids

IEC/TS 62257-9-3

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-3: Integrated system - User interface

IEC/TS 62257-9-4

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-4: Integrated system - Userinstallation

IEC 60730-2-11

Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators

IEC/TS 62257-8-1

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 8-1: Selection of batteries and battery management systems for stand-alone electrification systems - Specific case of automotive flooded lead-acid batteries available in developing countries

IEC/TS 62257-9-5

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-5: Integrated system - Selection of stand-alone lighting kits for rural electrification

IEC/TS 62257-12-1

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 12-1: Selection of self-ballasted lamps (CFL) for rural electrification systems and recommendations for household lighting equipment

IEC 61800-5-1

Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy

IEC 61970-407

Energy management system application program interface (EMS-API) - Part 407: Time Series Data Access (TSDA)

IEC 61970-404

Energy management system application program interface (EMS-API) - Part 404: High Speed Data Access (HSDA)

IEC 61970-405

Energy management system application program interface (EMS-API) - Part 405: Generic Eventing and Subscription (GES)

IEC/TS 61836

Solar photovoltaic energy systems - Terms, definitions and symbols

IEC/PAS 62559

IntelliGrid methodology for developing requirements for energy systems

IEC/TS 62257-7-3

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-3: Generator set - Selection of generator sets for rural electrification systems

IEC/TS 62257-7

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7: Generators

IEC 61970-403

Energy management system application program interface (EMS-API) - Part 403: Generic data access

IEC 61970-402

Energy management system application program interface (EMS-API) - Part 402: Common services

IEC 61970-453

Energy management system application program interface (EMS-API) - Part 453: CIM based graphics exchange

IEC/TS 62257-9-1

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-1: Micropower systems

IEC 62058-31

Electricity metering equipment (AC) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2)

IEC 62058-21

Electricity metering equipment (AC) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)

IEC/TS 62257-9-6

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-6: Integrated system - Selection of Photovoltaic Individual Electrification Systems (PV-IES)

IEC 61850-7-420

Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources logical nodes

IEC 61970-301

Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base

IEC/TS 60034-31

Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide

IEC 60532

Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV

IEC/TS 62257-7-1

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic generators

IEC 60269-6

Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems

IEC/TS 62654

Network-based energy consumption measurement - Energy saving system - Conceptual model

SANS 3744

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane

SANS 3743-1

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

SANS 3746

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane

ISO 15112:2007

Natural gas -- Energy determination

SANS 61241-2-3

Electrical apparatus for use in the presence of combustible dust Part 2: Test methods Section 3: Method for determining minimum ignition energy of dust/air mixtures

SANS 61358

Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)

SANS 61036

Alternating current static watt-hour meters for active energy (classes 1 and 2)

SANS 186

Energy regulators for electric heating units

SANS 60947-5-4

Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

SANS 50355

Personal protective equipment against falls from a height - Energy absorbers

SANS 62053-11

Electricity metering equipment (a.c.) - Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

SANS 62053-21

Electricity metering equipment (a.c.) - Particular requirements Part 21: Static meters for active energy (classes 1 and 2)

SANS 62053-22

Electricity metering equipment (a.c.) - Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

SANS 62053-23

Electricity metering equipment (a.c) - Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3)

SANS 1799

Watt-hour meters - AC electronic meters for active energy

NRS 080

Quantifying and reporting of energy losses in electricity distribution networks

ARP 062-1

Recommendations for small renewable energy and hybrid systems for rural electrification Part 1: General introduction to rural electrification

ARP 062-2

Recommendations for small renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification systems

SANS 61427

Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test

SANS 20101

Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only, or powered by a hybrid electric power train with regard to the measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range, and of categories M1 and N1 vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range

ARP 062-4

Recommendations for small renewable energy and hybrid systems for rural electrification Part 4: System selection and design

ARP 062-5

Recommendations for small renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical hazards

ARP 062-6

Recommendations for small renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement

SANS 62055-31

Electricity metering - Payment systems Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

ARP 062-3

Recommendations for small renewable energy and hybrid systems for rural electrification Part 3: Project development and management

SANS 1051-3

Braking Part 3: Energy sources and reservoirs

ARP 062-7-1

Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-1: Generators - Photovoltaic generators

ARP 062-9-2

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids

ARP 062-9-3

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-3: Integrated system - User interface

ARP 062-9-4

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-4: Integrated system - User installation

SANS 204-1

Energy efficiency in buildings Part 1: General requirements

SANS 204-2

Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control

SANS 204-3

Energy efficiency in buildings Part 3: The application of the energy efficiency requirements for buildings with artificial ventilation or air conditioning

SANS 60730-2-11

Automatic electrical controls for household and similar use Part 2-11: Particular requirements for energy regulators

SANS 61800-5-1

Adjustable speed electrical power drive systems Part 5-1: Safety requirements - Electrical, thermal and energy

ARP 062-8-1

Recommendations for small renewable energy and hybrid systems for rural electrification Part 8-1: Selection of batteries and battery management systems for stand-alone electrification systems - Specific case of automotive flooded lead-acid batteries available in developing countries

ARP 062-9-5

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-5: Integrated system - Selection of portable PV lanterns for rural electrification projects

ARP 062-12-1

Recommendations for small renewable energy and hybrid systems for rural electrification Part 12-1: Selection of self-ballasted lamps (CFL) for rural electrification systems and recommendations for household lighting equipment

SANS 62442-1

Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

ARP 062-7

Recommendations for small renewable energy and hybrid systems for rural electrification Part 7: Generators

ARP 062-7-3

Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set - Selection of generator sets for rural electrification systems

IEC/TS 62600-100

Marine energy - Wave, tidal and other water current converters - Part 100: Electricity producing wave energy converters - Power performance assessment

SANS 879

Energy management - Specifications

ARP 136

Energy management - Guidance on energy management

ARP 062-9-1

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-1: Micropower systems

ARP 062-9-6

Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-6: Integrated system - Selection of Photovoltaic Individual Electrification Systems (PV-IES)

ISO 15112:2011

Natural gas -- Energy determination

SANS 23045

Building environment design - Guidelines to assess energy efficiency of new buildings

SANS 16818

Building environment design - Energy efficiency - Terminology

SATS 50010

Measurement and verification of energy savings

SANS 15112

Natural gas - Energy determination

SANS 20865

Footwear - Test methods for outsoles - Compression energy

SANS 13600

Technical energy systems - Basic concepts

SANS 13601

Technical energy systems - Structure for analysis - Energyware supply and demand sectors

SANS 13602-2

Technical energy systems - Methods for analysis Part 2: Weighting and aggregation of energywares

SANS 6469-1

Electrically propelled road vehicles - Safety specifications Part 1: On-board rechargeable energy storage system (RESS)

SANS 8714

Electric road vehicles - Reference energy consumption and range - Test procedures for passenger cars and light commercial vehicles

SANS 23828

Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen

ISO 13465:2009

Nuclear energy -- Nuclear fuel technology -- Determination of neptunium in nitric acid solutions by spectrophotometry

SANS 60034-31

Rotating electrical machines Part 31: Selection of energy-efficient motors including variable speed applications - Application guide

SANS 50285

Energy efficiency of electric lamps for household use - Measurement methods

ISO 10645:1992

Nuclear energy -- Light water reactors -- Calculation of the decay heat power in nuclear fuels

ISO 18352:2009

Carbon-fibre-reinforced plastics -- Determination of compression-after-impact properties at a specified impact-energy level

ISO 11452-10:2009

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Immunity to conducted disturbances in the extended audio frequency range

SANS 62058-21

Electricity metering equipment (AC) - Acceptance inspection Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)

SANS 62058-31

Electricity metering equipment (AC) - Acceptance inspection Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2)

ISO 21238:2007

Nuclear energy -- Nuclear fuel technology -- Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants

IEC 61853-1

Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating

ISO 11451-3:1994

Road vehicles -- Electrical disturbances by narrowband radiated electromagnetic energy -- Vehicle test methods -- Part 3: On-board transmitter simulation

ISO 3648:1994

Aviation fuels -- Estimation of net specific energy

ISO 18292:2011

Energy performance of fenestration systems for residential buildings -- Calculation procedure

ISO 13694:2000

Optics and optical instruments -- Lasers and laser-related equipment -- Test methods for laser beam power (energy) density distribution

SANS 60269-6

Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems

ISO 50001:2011

Energy management systems -- Requirements with guidance for use

SANS 50001

Energy management systems - Requirements with guidance for use

ISO 21254-3:2011

Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 3: Assurance of laser power (energy) handling capabilities

ISO/TS 10798:2011

Nanotechnologies -- Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

SANS 10400-XA

The application of the National Building Regulations Part X: Environmental sustainability Part XA: Energy usage in buildings

SANS 204

Energy efficiency in buildings

SANS 50010

Measurement and verification of energy savings

IEC 62442-1

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

ISO 22309:2011

Microbeam analysis -- Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

ISO/IEC TR 15067-3:2000

Information technology -- Home Electronic Systems (HES) application model -- Part 3: Model of an energy management system for HES

SANS 941

Energy efficiency of electrical and electronic apparatus

IEC/TS 62600-1

Marine energy - Wave, tidal and other water current converters - Part 1: Terminology

ISO/IEC 14543-3-10

Information technology - Home electronic system (HES) architecture - Part 3-10: Wireless short-packet (WSP) protocol optimised for energy harvesting - Architecture and lower layer protocols

ISO 11451-3:1994

Road vehicles -- Electrical disturbances by narrowband radiated electromagnetic energy -- Vehicle test methods -- Part 3: On-board transmitter simulation

ISO 11452-1:2005

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

SANS 61036

Alternating current static watt-hour meters for active energy (classes 1 and 2)

SANS 204-3

Energy efficiency in buildings Part 3: The application of the energy efficiency requirements for buildings with artificial ventilation or air conditioning

SANS 204-1

Energy efficiency in buildings Part 1: General requirements

SANS 204-2

Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control

ISO 3745:2012

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for anechoic rooms and hemi-anechoic rooms

ISO 11452-9:2012

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 9: Portable transmitters

ISO 13032:2012

Petroleum products -- Determination of low concentration of sulfur in automotive fuels -- Energy-dispersive X-ray fluorescence spectrometric method

ISO 11452-4:2011

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Harness excitation methods

ISO/IEC 14543-3-10:2012

Information technology -- Home Electronic Systems (HES) -- Part 3-10: Wireless Short-Packet (WSP) protocol optimized for energy harvesting -- Architecture and lower layer protocols

ISO/IEC 15067-3

Information technology - Home electronic system (HES) application model - Part 3: Model of a demand-response energy management system for HES

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 62442-1

Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

SANS 9488

Solar energy - Vocabulary

IEC/TR 61850-90-7

Communication networks and systems for power utility automation - Part 90-7: Object models for power converters in distributed energy resources (DER) systems

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SATR 61850-90-7

Communication networks and systems for power utility automation Part 90-7: Object models for power converters in distributed energy resources (DER) systems

SANS 61850-7-420

Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodes

SANS 61427-1

Secondary cells and batteries for renewable energy storage - General requirements and methods of test Part 1: Photovoltaic off-grid application

IEC 62623

Desktop and notebook computers - Measurement of energy consumption

IEC 61970-452

Energy management system application program interface (EMS-API) - Part 452: CIM Static transmission network model profiles

SANS 25745-1

Energy performance of lifts, escalators and moving walks Part 1: Energy measurement and verification

ISO/IEC/TR 27019

Information technology -- Security techniques -- Information security management guidelines based on ISO/IEC 27002 for process control systems specific to the energy utility industry

IEC 61427-1

Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: Photovoltaic off-grid application

IEC 61558-2-26

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes

IEC 61970-456

Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles

IEC 62325-450

Framework for energy market communications - Part 450: Profile and context modelling rules

IEC/TS 62600-200

Marine energy - Wave, tidal and other water current converters - Part 200: Electricity producing tidal energy converters - Power performance assessment

IEC/TS 62796

Energy efficiency in electroheating installations