Page Header

Environmental Management Services - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the specific Environment standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Environment Industry. This scheme provides the Accessibility & Disability components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 11201:2010

Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections

ISO 11202:2010

Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections

ISO 11204:2010

Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

ISO 14243-3:2004

Implants for surgery -- Wear of total knee-joint prostheses -- Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test

ISO 14040:2006

Environmental management -- Life cycle assessment -- Principles and framework

ISO 22088-5:2006

Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 5: Constant tensile deformation method

ISO 14644-8:2006

Cleanrooms and associated controlled environments -- Part 8: Classification of airborne molecular contamination

ISO 22088-6:2006

Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 6: Slow strain rate method

ISO 14644-7:2004

Cleanrooms and associated controlled environments -- Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

ISO/TS 14505-1:2007

Ergonomics of the thermal environment -- Evaluation of thermal environments in vehicles -- Part 1: Principles and methods for assessment of thermal stress

ISO/IEC TR 18057:200

Information technology -- Telecommunications and information exchange between systems -- Using ECMA-323 (CSTA XML) in a Voice Browser Environment

ISO 14044:2006

Environmental management -- Life cycle assessment -- Requirements and guidelines

ISO 18192-1:2011

Implants for surgery -- Wear of total intervertebral spinal disc prostheses -- Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test

ISO 15003:2006

Agricultural engineering -- Electrical and electronic equipment -- Testing resistance to environmental conditions

ISO/IEC TR 24716:200

Information technology -- Programming languages, their environment and system software interfaces -- Native COBOL Syntax for XML Support

ISO/IEC TR 24715:200

Information technology -- Programming languages, their environments and system software interfaces -- Technical Report on the Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360)

ISO/IEC TR 24717:200

Information technology -- Programming languages, their environments and system software interfaces -- Collection classes for programming language COBOL

ISO/IEC TR 24731-1:2

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C library -- Part 1: Bounds-checking interfaces

ISO/IEC TR 24732:200

Information technology -- Programming languages, their environments and system software interfaces -- Extension for the programming language C to support decimal floating-point arithmetic

ISO/IEC 24747:2009

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C Library to support mathematical special functions

ISO 15743:2008

Ergonomics of the thermal environment -- Cold workplaces -- Risk assessment and management

ISO 11079:2007

Ergonomics of the thermal environment -- Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects

ISO 14505-3:2006

Ergonomics of the thermal environment -- Evaluation of thermal environments in vehicles -- Part 3: Evaluation of thermal comfort using human subjects

ISO 16750-1:2006

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 1: General

ISO 16121-4:2005

Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 4: Cabin environment

ISO 7730:2005

Ergonomics of the thermal environment -- Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

ISO 9920:2007

Ergonomics of the thermal environment -- Estimation of thermal insulation and water vapour resistance of a clothing ensemble

ISO 13474:2009

Acoustics -- Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment

ISO 11064-6:2005

Ergonomic design of control centres -- Part 6: Environmental requirements for control centres

ISO 14644-6:2007

Cleanrooms and associated controlled environments -- Part 6: Vocabulary

ISO/TS 14415:2005

Ergonomics of the thermal environment -- Application of International Standards to people with special requirements

ISO 21348:2007

Space environment (natural and artificial) -- Process for determining solar irradiances

ISO 21930:2007

Sustainability in building construction -- Environmental declaration of building products

ISO/TS 21931-1:2006

Sustainability in building construction -- Framework for methods of assessment for environmental performance of construction works -- Part 1: Buildings

ISO/IEC 7816-13:2007

Identification cards -- Integrated circuit cards -- Part 13: Commands for application management in a multi-application environment

ISO 10109-6:2005

Optics and photonics -- Environmental requirements -- Part 6: Test requirements for medical optical instruments

ISO 10109-8:2005

Optics and photonics -- Environmental requirements -- Part 8: Test requirements for extreme conditions of use

ISO 9022-7:2005

Optics and photonics -- Environmental test methods -- Part 7: Resistance to drip or rain

ISO 18185-3:2006

Freight containers -- Electronic seals -- Part 3: Environmental characteristics

ISO 18589-5:2009

Measurement of radioactivity in the environment -- Soil -- Part 5: Measurement of strontium 90

ISO 18589-6:2009

Measurement of radioactivity in the environment -- Soil -- Part 6: Measurement of gross alpha and gross beta activities

ISO 18589-4:2009

Measurement of radioactivity in the environment -- Soil -- Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry

ISO 14045:2012

Environmental management -- Eco-efficiency assessment of product systems -- Principles, requirements and guidelines

ISO 16813:2006

Building environment design -- Indoor environment -- General principles

ISO 16818:2008

Building environment design -- Energy efficiency -- Terminology

ISO Guide 64:2008

Guide for addressing environmental issues in product standards

ISO 14050:2009

Environmental management -- Vocabulary

ISO/IEC 24756:2009

Information technology -- Framework for specifying a common access profile (CAP) of needs and capabilities of users, systems, and their environments

ISO 1996-2:2007

Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels

ISO/IEC 9973:2006

Information technology -- Computer graphics, image processing and environmental data representation -- Procedures for registration of items

ISO 21072-2:2009

Ships and marine technology -- Marine environment protection: performance testing of oil skimmers -- Part 2: Static water conditions

ISO/TR 24699:2009

Rubber and rubber products -- Environmental aspects -- General guidelines for their inclusion in standards

ISO 10263-1:2009

Earth-moving machinery -- Operator enclosure environment -- Part 1: Terms and definitions

ISO 10263-2:2009

Earth-moving machinery -- Operator enclosure environment -- Part 2: Air filter element test method

ISO 10263-3:2009

Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method

ISO 10263-4:2009

Earth-moving machinery -- Operator enclosure environment -- Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance

ISO 10263-5:2009

Earth-moving machinery -- Operator enclosure environment -- Part 5: Windscreen defrosting system test method

ISO 10263-6:2009

Earth-moving machinery -- Operator enclosure environment -- Part 6: Determination of effect of solar heating

ISO 16814:2008

Building environment design -- Indoor air quality -- Methods of expressing the quality of indoor air for human occupancy

ISO/IEC TR 18015:200

Information technology -- Programming languages, their environments and system software interfaces -- Technical Report on C++ Performance

ISO 19933:2007

Space systems -- Format for spacecraft launch environment test report

ISO/IEC 24771:2009

Information technology -- Telecommunications and information exchange between systems -- MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment

ISO 13732-1:2006

Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 1: Hot surfaces

ISO 9211-3:2008

Optics and photonics -- Optical coatings -- Part 3: Environmental durability

ISO 14243-1:2009

Implants for surgery -- Wear of total knee-joint prostheses -- Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test

ISO/IEC 13816:2007

Information technology -- Programming languages, their environments and system software interfaces -- Programming language ISLISP

ISO/IEC 19776-2:2008

Information technology -- Computer graphics, image processing and environmental data representation -- Extensible 3D (X3D) encodings -- Part 2: Classic VRML encoding

ISO 21072-3:2010

Ships and marine technology -- Marine environment protection: performance testing of oil skimmers -- Part 3: High viscosity oil

ISO 14242-3:2009

Implants for surgery -- Wear of total hip-joint prostheses -- Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test

ISO/IEC TR 29106:200

Information technology -- Generic cabling -- Introduction to the MICE environmental classification

ISO 10813-1:2004

Vibration generating machines -- Guidance for selection -- Part 1: Equipment for environmental testing

ISO 23045:2008

Building environment design -- Guidelines to assess energy efficiency of new buildings

ISO 16750-5:2010

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 5: Chemical loads

ISO 16750-2:2010

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads

ISO/IEC 19778-2:2008

Information technology -- Learning, education and training -- Collaborative technology -- Collaborative workplace -- Part 2: Collaborative environment data model

ISO 14505-2:2006

Ergonomics of the thermal environment -- Evaluation of thermal environments in vehicles -- Part 2: Determination of equivalent temperature

ISO/IEC TR 14165-312

Information technology -- Fibre Channel -- Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)

ISO 30000:2009

Ships and marine technology -- Ship recycling management systems -- Specifications for management systems for safe and environmentally sound ship recycling facilities

ISO 22009:2009

Space systems -- Space environment (natural and artificial) -- Model of the earth's magnetospheric magnetic field

ISO/TS 16457:2009

Space systems -- Space environment (natural and artificial) -- The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere

ISO/TR 12773-2:2009

Business requirements for health summary records -- Part 2: Environmental scan

ISO/IEC TR 29163-3:2

Information technology -- Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition -- Part 3: Run-Time Environment Version 1.1

ISO 15156-1:2009

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 1: General principles for selection of cracking-resistant materials

ISO 15156-2:2009

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

ISO 15156-3:2009

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

ISO 26842-1:2009

Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 1: Resistance to delamination in non-severe environments

ISO 26842-2:2009

Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 2: Resistance to delamination in severe environments

ISO 21931-1:2010

Sustainability in building construction -- Framework for methods of assessment of the environmental performance of construction works -- Part 1: Buildings

ISO 18589-2:2007

Measurement of radioactivity in the environment -- Soil -- Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples

ISO/IEC 29124:2010

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C++ Library to support mathematical special functions

ISO 13281:1997

Industrial automation systems -- Manufacturing Automation Programming Environment (MAPLE) -- Functional architecture

ISO 2678:1985

Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment

IEC 60601-1-11:2010

Medical electrical equipment -- Part 1-11: General requirements for basic safety and essential performance -- Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

ISO 9022-1:1994

Optics and optical instruments -- Environmental test methods -- Part 1: Definitions, extent of testing

ISO 7933:2004

Ergonomics of the thermal environment -- Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

ISO 16750-3:2007

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads

ISO 21072-1:2009

Ships and marine technology -- Marine environment protection: performance testing of oil skimmers -- Part 1: Moving water conditions

ISO 15856:2010

Space systems -- Space environment -- Simulation guidelines for radiation exposure of non-metallic materials

ISO 2669:1995

Environmental tests for aircraft equipment -- Steady-state acceleration

ISO 2671:1982

Environmental tests for aircraft equipment -- Part 3.4 : Acoustic vibration

ISO 4524-2:2000

Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests

ISO 5843-5:1990

Aerospace -- List of equivalent terms -- Part 5: Environmental and operating conditions for aircraft equipment

ISO 7243:1989

Hot environments -- Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)

ISO 7726:1998

Ergonomics of the thermal environment -- Instruments for measuring physical quantities

ISO 8297:1994

Acoustics -- Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment -- Engineering method

ISO/TR 8647:1990

Environmental degradation of textiles used in air cargo restraint equipment

ISO 9022-5:1994

Optics and optical instruments -- Environmental test methods -- Part 5: Combined cold, low air pressure

ISO 9022-6:1994

Optics and optical instruments -- Environmental test methods -- Part 6: Dust

ISO 9022-8:1994

Optics and optical instruments -- Environmental test methods -- Part 8: High pressure, low pressure, immersion

ISO 9022-11:1994

Optics and optical instruments -- Environmental test methods -- Part 11: Mould growth

ISO 9022-14:1994

Optics and optical instruments -- Environmental test methods -- Part 14: Dew, hoarfrost, ice

ISO 9022-17:1994

Optics and optical instruments -- Environmental test methods -- Part 17: Combined contamination, solar radiation

ISO 9022-18:1994

Optics and optical instruments -- Environmental test methods -- Part 18: Combined damp heat and low internal pressure

ISO 9022-19:1994

Optics and optical instruments -- Environmental test methods -- Part 19: Temperature cycles combined with sinusoidal or random vibration

ISO 9241-6:1999

Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 6: Guidance on the work environment

ISO/IEC 9282-1:1988

Information processing -- Coded representation of pictures -- Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment

ISO 9662:1994

Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests

ISO/IEC TR 10182:199

Information technology -- Programming languages, their environments and system software interfaces -- Guidelines for language bindings

ISO 10551:1995

Ergonomics of the thermal environment -- Assessment of the influence of the thermal environment using subjective judgement scales

ISO 11399:1995

Ergonomics of the thermal environment -- Principles and application of relevant International Standards

ISO 11403-3:1999

Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties

ISO/IEC 14478-1:1998

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 1: Fundamentals of PREMO

ISO 3747:2010

Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering/survey methods for use in situ in a reverberant environment

ISO 12944-2:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments

ISO 13731:2001

Ergonomics of the thermal environment -- Vocabulary and symbols

ISO 9022-20:1997

Optics and optical instruments -- Environmental test methods -- Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide

ISO 7137:1995

Aircraft -- Environmental conditions and test procedures for airborne equipment

ISO/IEC 13751:2001

Information technology -- Programming languages, their environments and system software interfaces -- Programming language Extended APL

ISO/IEC 13817-1:1996

Information technology -- Programming languages, their environments and system software interfaces -- Vienna Development Method -- Specification Language -- Part 1: Base language

ISO 14024:1999

Environmental labels and declarations -- Type I environmental labelling -- Principles and procedures

ISO 14021:1999

Environmental labels and declarations -- Self-declared environmental claims (Type II environmental labelling)

ISO 14031:1999

Environmental management -- Environmental performance evaluation -- Guidelines

ISO 14015:2001

Environmental management -- Environmental assessment of sites and organizations (EASO)

ISO 14242-1:2002

Implants for surgery -- Wear of total hip-joint prostheses -- Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

ISO 2685:1998

Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones

ISO/IEC TR 14369:199

Information technology -- Programming languages, their environments and system software interfaces -- Guidelines for the preparation of Language-Independent Service Specifications (LISS)

ISO 14269-1:1997

Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 1: Vocabulary

ISO 5667-14:1998

Water quality -- Sampling -- Part 14: Guidance on quality assurance of environmental water sampling and handling

ISO/IEC 14478-2:1998

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 2: Foundation Component

ISO/IEC 14478-3:1998

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 3: Multimedia Systems Services

ISO/IEC 14478-4:1998

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 4: Modelling, rendering and interaction component

ISO 14622:2000

Space systems -- Structural design -- Loads and induced environment

ISO 14644-4:2001

Cleanrooms and associated controlled environments -- Part 4: Design, construction and start-up

ISO 14644-2:2000

Cleanrooms and associated controlled environments -- Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

ISO 14698-1:2003

Cleanrooms and associated controlled environments -- Biocontamination control -- Part 1: General principles and methods

ISO 14644-1:1999

Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness

ISO 3977-4:2002

Gas turbines -- Procurement -- Part 4: Fuels and environment

ISO 15265:2004

Ergonomics of the thermal environment -- Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions

ISO 14269-2:1997

Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 2: Heating, ventilation and air-conditioning test method and performance

ISO 14269-3:1997

Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 3: Determination of effect of solar heating

ISO 14269-4:1997

Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 4: Air filter element test method

ISO 14269-5:1997

Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 5: Pressurization system test method

ISO 9022-3:1998

Optics and optical instruments -- Environmental test methods -- Part 3: Mechanical stress

ISO 9022-10:1998

Optics and optical instruments -- Environmental test methods -- Part 10: Combined sinusoidal vibration and dry heat or cold

ISO 9022-13:1998

Optics and optical instruments -- Environmental test methods -- Part 13: Combined shock, bump or free fall and dry heat or cold

ISO 9022-15:1998

Optics and optical instruments -- Environmental test methods -- Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold

ISO 9022-16:1998

Optics and optical instruments -- Environmental test methods -- Part 16: Combined bounce or steady-state acceleration and dry heat or cold

ISO 9022-21:1998

Optics and optical instruments -- Environmental test methods -- Part 21: Combined low pressure and ambient temperature or dry heat

ISO 10109-7:2001

Optics and optical instruments -- Environmental requirements -- Part 7: Test requirements for optical measuring instruments

ISO 15593:2001

Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence

ISO 13281-2:2000

Industrial automation systems and integration -- Manufacturing Automation Programming Environment (MAPLE) -- Part 2: Services and interfaces

ISO 10109-4:2001

Optics and optical instruments -- Environmental requirements -- Part 4: Test requirements for telescopic systems

ISO 1996-1:2003

Acoustics -- Description, measurement and assessment of environmental noise -- Part 1: Basic quantities and assessment procedures

ISO/IEC 13719-4:1998

Information technology -- Portable Common Tool Environment (PCTE) -- Part 4: IDL binding (Interface Definition Language)

ISO 14624-4:2003

Space systems -- Safety and compatibility of materials -- Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments

ISO 15888:2000

Space data and information transfer systems -- Standard formatted data units -- Referencing environment

ISO/IEC 15940:2006

Information Technology -- Software Engineering Environment Services

ISO 8796:2004

Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements

ISO/TR 14049:2000

Environmental management -- Life cycle assessment -- Examples of application of ISO 14041 to goal and scope definition and inventory analysis

ISO/TS 14048:2002

Environmental management -- Life cycle assessment -- Data documentation format

ISO 16221:2001

Water quality -- Guidance for determination of biodegradability in the marine environment

ISO 16428:2005

Implants for surgery -- Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices

ISO/IEC 13719-1:1998

Information technology -- Portable Common Tool Environment (PCTE) -- Part 1: Abstract specification

ISO/IEC 13719-2:1998

Information technology -- Portable Common Tool Environment (PCTE) -- Part 2: C programming language binding

ISO/IEC 13719-3:1998

Information technology -- Portable common tool environment (PCTE) -- Part 3: Ada programming language binding

ISO/IEC TR 10000-3:1

Information technology -- Framework and taxonomy of International Standardized Profiles -- Part 3: Principles and Taxonomy for Open System Environment Profiles

ISO 16165:2001

Ships and marine technology -- Marine environment protection -- Terminology relating to oil spill response

ISO 10109-11:2001

Optics and optical instruments -- Environmental requirements -- Part 11: Optical instruments for outdoor conditions of use

ISO 15686-6:2004

Buildings and constructed assets -- Service life planning -- Part 6: Procedures for considering environmental impacts

ISO 16446:2002

Ships and marine technology -- Marine environmental protection -- Adaptor for joining dissimilar boom connectors

ISO/IEC ISP 15287-2:

Information technology -- Standardized Application Environment Profile -- Part 2: POSIX® Realtime Application Support (AEP)

ISO/TR 14047:2003

Environmental management -- Life cycle impact assessment -- Examples of application of ISO 14042

ISO 16770:2004

Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT)

ISO 19011:2002

Guidelines for quality and/or environmental management systems auditing

ISO 14001:2004

Environmental management systems -- Requirements with guidance for use

ISO 14004:2004

Environmental management systems -- General guidelines on principles, systems and support techniques

ISO 18934:2006

Imaging materials -- Multiple media archives -- Storage environment

ISO/TR 14062:2002

Environmental management -- Integrating environmental aspects into product design and development

ISO 18144:2003

Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Method based on solanesol

ISO 18145:2003

Environmental tobacco smoke --Determination of vapour phase nicotine and 3-ethenylpyridine in air -- Gas-chromatographic method

ISO 14644-5:2004

Cleanrooms and associated controlled environments -- Part 5: Operations

ISO/IEC TR 19769:200

Information technology -- Programming languages, their environments and system software inferfaces -- Extensions for the programming language C to support new character data types

ISO 9022-2:2002

Optics and optical instruments -- Environmental test methods -- Part 2: Cold, heat and humidity

ISO 9022-4:2002

Optics and optical instruments -- Environmental test methods -- Part 4: Salt mist

ISO/TS 13732-2:2001

Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 2: Human contact with surfaces at moderate temperature

ISO 13732-3:2005

Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 3: Cold surfaces

ISO 8996:2004

Ergonomics of the thermal environment -- Determination of metabolic rate

ISO 14020:2000

Environmental labels and declarations -- General principles

ISO 14063:2006

Environmental management -- Environmental communication -- Guidelines and examples

ISO 12894:2001

Ergonomics of the thermal environment -- Medical supervision of individuals exposed to extreme hot or cold environments

ISO 22088-1:2006

Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 1: General guidance

ISO 22088-2:2006

Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 2: Constant tensile load method

ISO 22088-3:2006

Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 3: Bent strip method

ISO 22088-4:2006

Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 4: Ball or pin impression method

ISO/TR 27507:2010

Plain bearings -- Recommendations for automotive crankshaft bearing environments

ISO/IEC TR 19755:200

Information technology -- Programming languages, their environments and system software interfaces -- Object finalization for programming language COBOL

ISO 10109-1:2005

Optics and photonics -- Environmental requirements -- Part 1: General overview, terms and definitions, climatic zones and their parameters

ISO/IEC 20970:2002

Information technology -- Programming languages, their environments and system software interfaces -- JEFF file format

ISO 18589-1:2005

Measurement of radioactivity in the environment -- Soil -- Part 1: General guidelines and definitions

ISO 11844-3:2006

Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 3: Measurement of environmental parameters affecting indoor corrosivity

ISO 15390:2004

Space environment (natural and artificial) -- Galactic cosmic ray model

ISO 14644-3:2005

Cleanrooms and associated controlled environments -- Part 3: Test methods

IEC/TR 61000-2-1

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems

IEC/TR 61000-2-3

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena

IEC 61017-1

Portable, transportable or installed X or gamma radiation ratemeters for environmental monitoring - Part 1: Ratemeters

IEC 61017-2

Radiation protection instrumentation - Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring - Part 2: Integrating assemblies

IEC 62012-1

Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification

IEC 60068-2-39

Environmental testing - Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test

IEC 60068-2-40

Environmental testing - Part 2: Tests. Test Z/AM: Combined cold/low air pressure tests

IEC 60068-2-40-am1

Amendment 1 - Environmental testing - Part 2: Tests. Test Z/AM: Combined cold/low air pressure tests

IEC 60068-2-41

Environmental testing - Part 2: Tests. Test Z/BM: Combined dry heat/low air pressure tests

IEC 60068-2-41-am1

Amendment 1 - Environmental testing - Part 2: Tests. Test Z/BM: Combined dry heat/low air pressure tests

IEC 60068-2-45

Environmental testing. Part 2: Tests. Test XA and guidance: Immersion in cleaning solvents

IEC 60068-2-45-am1

Amendment 1 - Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents

IEC 60068-2-46

Environmental testing - Part 2: Tests. Guidance to Test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-49

Environmental testing - Part 2: Tests. Guidance to Test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-55

Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-59

Environmental testing. Part 2: Tests. Test Fe: Vibration - Sine-beat method

IEC 60068-2-61

Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence

IEC 60068-2-65

Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method

IEC 60068-2-66

Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

IEC 60068-4-am1

Amendment 1 - Environmental testing. Part 4: Information for specification writers - Test summaries

IEC 60068-4-am2

Amendment 2 - Environmental testing. Part 4: Information for specification writers - Test summaries

IEC 60068-2-68

Environmental testing - Part 2: Tests - Test L: Dust and sand

IEC 60068-3-1

Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests

IEC 60068-3-1A

Environmental testing - Part 3: Background information - First supplement

IEC 60068-3-2

Environmental testing - Part 3: Background information - Section Two: Combined temperature/low air pressure tests

IEC 60068-3-3

Environmental testing - Part 3: Guidance. Seismic test methods for equipment

IEC 60068-4

Environmental testing. Part 4: Information for specification writers - Test summaries

IEC 60068-5-2

Environmental testing. Part 5: Guide to drafting of test methods - Terms and definitions

ISO 16121-4:2011

Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 4: Cabin environment

ISO/IEC ISP 15287-2:2000

Information technology -- Standardized Application Environment Profile -- Part 2: POSIX® Realtime Application Support (AEP)

IEC 61171

Radiation protection instrumentation - Monitoring equipment - Atmospheric radioactive iodines in the environment

IEC 61172

Radiation protection instrumentation - Monitoring equipment - Radioactive aerosols in the environment

IEC 60721-2-1-am1

Amendment 1 - Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Temperature and humidity

IEC 60721-2-2

Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind

IEC 60721-2-3

Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure

IEC 60721-2-4-am1

Amendment 1 - Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Solar radiation and temperature

IEC 60721-2-5

Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist

IEC 60721-2-6

Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock

ISO 10109-1:2005

Optics and photonics -- Environmental requirements -- Part 1: General overview, terms and definitions, climatic zones and their parameters

IEC 60721-2-7

Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Fauna and flora

IEC 60721-2-8

Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 8: Fire exposure

IEC 60721-3-0-am1

Amendment 1 - Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Introduction

IEC 60721-3-6

Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment

IEC 60721-3-6-am1

Amendment 1 - Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment

IEC 60721-3-9

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products

IEC 60721-3-9-am1

Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products

ISO 26101:2012

Acoustics -- Test methods for the qualification of free-field environments

IEC 60839-1-3

Alarm systems. Part 1: General requirements. Section Three: Environmental testing

IEC 60068-1

Environmental testing. Part 1: General and guidance

IEC 60068-1-am1

Amendment 1 - Environmental testing. Part 1: General and guidance

IEC 60068-2-7

Basic environmental testing procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state

IEC 60068-2-7-am1

Amendment 1 - Basic environmental testing procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state

IEC 60068-2-11

Environmental testing - Part 2: Tests. Test Ka: Salt mist

IEC 60068-2-13

Environmental testing - Part 2: Tests. Test M: Low air pressure

IEC 60068-2-17

Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing

IEC 60068-2-44

Environmental testing - Part 2: Tests - Guidance on test T: Soldering

IEC 60068-2-60

Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test

IEC 60068-2-67

Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components

IEC 60068-2-70

Environmental testing - Part 2: Tests - Test Xb: Abrasion of marking and letterings caused by rubbing of fingers and hands

IEC 60721-1-am1

Amendment 1 - Classification of environmental conditions - Part 1: Environmental parameters and their severities

IEC 60721-1-am2

Amendment 2 - Classification of environmental conditions - Part 1: Environmental parameters and their severities

IEC 60721-3-3-am1

Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations

IEC 60721-3-4

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations

IEC/TS 61000-2-5

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 5: Classification of electromagnetic environments. Basic EMC publication

IEC/TR 61000-2-6

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances

IEC 60068-2-52

Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium, chloride solution)

IEC 61114-2

Methods of measurement on receiving antennas for satellite broadcast transmissions in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas

IEC 61000-2-9

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication

IEC GUIDE 106

Guide for specifying environmental conditions for equipment performance rating

IEC 60870-2-2

Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non electrical influences)

IEC 60721-3-3-am2

Amendment 2 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations

IEC 60721-3-4-am1

Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations

IEC 60721-3-6-am2

Amendment 2 - Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment

IEC 60721-3-7-am1

Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use

IEC 60721-3-1

Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage

IEC 60721-3-2

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation

IEC 60721-3-5

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations

ISO 16817:2012

Building environment design -- Indoor environment -- Design process for visual environment

IEC 60068-2-75

Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

IEC 61275

Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector

ISO/TR 14047:2012

Environmental management -- Life cycle assessment -- Illustrative examples on how to apply ISO 14044 to impact assessment situations

IEC/TR 61000-2-7

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments

IEC 61747-5

Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods

IEC 61000-2-10

Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance

IEC 60068-2-77

Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock

IEC 60068-2-74

Environmental testing - Part 2: Tests - Test Xc: Fluid contamination

IEC 61000-2-11

Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments

IEC 60068-2-57

Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method

IEC 61753-2-1

Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment

IEC 60068-2-18

Environmental testing - Part 2-18: Tests - Test R and guidance: Water

IEC 61969-3

Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects

IEC/TS 61000-6-5

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments

ISO 10109-12:2004

Optics and optical instruments -- Environmental requirements -- Part 12: Conditions of transport for optical instruments

IEC 60068-2-78

Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

IEC 60068-3-5

Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers

IEC 60068-3-6

Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers

IEC 60068-3-7

Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

IEC 60068-3-4

Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests

IEC 61753-051-3

Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment

IEC 61000-2-2

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

IEC 61559-2

Radiation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 2: Requirements for discharge, environmental, accident, or post-accident monitoring functions

IEC 61000-2-4

Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

IEC/TR 60721-4-0

Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction

IEC 60721-1

Classification of environmental conditions - Part 1: Environmental parameters and their severities

IEC 60721-2-4

Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature

IEC 60721-2-1

Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity

IEC 60721-3-0

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Introduction

IEC 60721-3-7

Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use

IEC/TR 61000-2-8

Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results

IEC 61753-022-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment

IEC 61000-2-12

Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems

IEC/TR 60721-4-7-am1

Amendment 1 - Classification of environment conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use

IEC/TR 60721-4-2-am1

Amendment 1 - Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation

IEC/TR 60721-4-3-am1

Amendment 1 - Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations

IEC/TR 60721-4-4-am1

Amendment 1 - Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations

IEC/TR 60721-4-5-am1

Amendment 1 - Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations

IEC/TR 60721-4-6-am1

Amendment 1 - Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment

IEC 60068-2-42

Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-43

Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

IEC/TR 60721-4-1-am1

Amendment 1 - Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage

IEC GUIDE 109

Environmental aspects - Inclusion in electrotechnical product standards

IEC 60068-2-81

Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis

IEC 60544-4

Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments

IEC/TR 60721-4-1

Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage

IEC/TR 60721-4-5

Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations

IEC/TR 60721-4-6

Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment

IEC/TR 60721-4-4

Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations

IEC/TR 60721-4-2

Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation

IEC/TR 60721-4-3

Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations

IEC/TR 60721-4-7

Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use

IEC 60068-3-8

Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

IEC 60721-3-3

Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations

IEC 61753-053-3

Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment

IEC 61753-061-3

Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment

IEC 61753-091-3

Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single mode fibre optic pigtailed style circulators for category U - Uncontrolled environment

IEC 60811-4-1

Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope

IEC 62137

Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN

IEC/TR 62139

Guidelines for the addition of environmental aspects in product standards specitif to TC 23

IEC 60068-2-58

Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

IEC 61000-6-2

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

IEC 61000-2-13

Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted

IEC 61000-6-1

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

IEC 62093

Balance-of-system components for photovoltaic systems - Design qualification natural environments

IEC 60068-2-47

Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests

IEC 60068-2-80

Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode

IEC GUIDE 114

Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products

IEC 60068-2-10

Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth

IEC 62243

Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE)

IEC 60068-2-30

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

IEC 61196-1-206

Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence

IEC 61196-1-200

Coaxial communication cables - Part 1-200: Environmental test methods - General requirements

IEC 60068-2-54

Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method

IEC 60068-2-21

Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices

IEC 61066

Thermoluminescence dosimetry systems for personal and environmental monitoring

IEC 61000-6-4

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

IEC 61000-6-3

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

IEC 61076-3-106

Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

IEC 61753-101-2

Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for Category C - Controlled environment

IEC 61753-101-3

Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment

IEC/TR 61000-2-14

Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks

IEC/TR 60068-3-12

Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile

IEC 60068-2-1

Environmental testing - Part 2-1: Tests - Test A: Cold

IEC 61587-1

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions

IEC 61753-083-2

Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment

IEC/TR 62422

Environmental characterization of solid insulating materials

IEC 61196-1-203

Coaxial communication cables - Part 1-203: Environmental test methods - Test for water penetration of cable

IEC 61753-084-2

Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment

IEC 60068-2-69

Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method

IEC 60068-3-11

Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers

IEC 60068-2-82

Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components

IEC 61753-062-6

Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test

IEC 62343-1-2

Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)

IEC 60601-1-9

Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 62137-1-1

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test

IEC 61753-092-6

Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test

IEC 60068-2-2

Environmental testing - Part 2-2: Tests - Test B: Dry heat

IEC 62137-1-2

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test

IEC 62387-1

Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements

IEC/TR 62125

Environmental statement specific to IEC TC 20 - Electric cables

IEC 61753-021-6

Fibre optic interconnecting devices and passive componentsperformance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment

IEC 62526

Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments

ISO/IEC/TR 29106

Information technology - Generic cabling - Introduction to the MICE environmental classification

IEC 61753-021-2

Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment

IEC 60068-2-6

Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

IEC 62075

Audio/video, information and communication technology equipment - Environmentally conscious design

IEC 61326-3-2

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment

IEC/PAS 62545

Environmental information on Electrical and Electronic Equipment (EIEEE)

IEC 61196-1-205

Coaxial communication cables - Part 1-205: Environmental test methods - Resistance to solvents and contaminating fluids

IEC 60068-2-27

Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

IEC 60068-2-64

Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

IEC 61753-082-2

Fibre optic interconnecting devices and passive components performance standard - Part 082-2: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category C - Controlled environment

IEC 60068-2-31

Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens

IEC 61753-085-2

Fibre optic interconnecting devices and passive components performance standard - Part 085-2: Non-connectorized single-mode pigtailed CWDM devices for category C - Controlled environment

IEC 61753-031-6

Fibre optic interconnecting devices and passive components performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category O - Uncontrolled environment

IEC 60068-2-20

Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads

IEC 61076-3-116

Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever

IEC/PAS 62137-3

Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints

IEC 62137-1-3

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test

IEC 60068-2-14

Environmental testing - Part 2-14: Tests - Test N: Change of temperature

IEC 61747-10-1

Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical

IEC 60068-2-38

Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test

IEC 62137-1-4

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test

IEC 61196-1-208

Coaxial communication cables - Part 1-208: Environmental test methods - Longitudinal pneumatic resistance

IEC 61196-1-201

Coaxial communication cables - Part 1-201: Environmental test methods - Test for cold bend performance of cable

IEC 61753-031-3

Fibre optic interconnecting devices and passive components performance standard - Part 031-3: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category U - Uncontrolled environment

IEC 62137-1-5

Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test

IEC 62430

Environmentally conscious design for electrical and electronic products

IEC 60846-1

Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors

IEC 61747-5-3

Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability

IEC 61076-3-117

Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling

IEC 61076-3-114

Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type

IEC 61076-3-115

Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type

ISO/IEC/TR 14165-312

Information technology - Fibre channel - Part 312: Avionics environment upper layer protocol (FC-AE 1553)

IEC 61753-081-2

Fibre optic interconnecting devices and passive components performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments

IEC 61753-086-2

Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment

IEC 62341-5

Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods

IEC 61753-131-3

Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment

IEC 62438

Radiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment

IEC 60068-2-53

Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

IEC/PAS 61753-088-2

Fibre optic interconnecting devices and passive components performance standard - Part 088-2: Non-connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments

IEC 60068-2-5

Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing

IEC 61753-121-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment

IEC 61753-121-3

Fibre optic interconnecting devices and passive components -Performance standard - Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment

IEC 62599-1

Alarm systems - Part 1: Environmental test methods

IEC 62498-1

Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock

IEC 62498-2

Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations

IEC 62498-3

Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications

SANS 20825

Environmentally acceptable hand dishwashing and light duty detergent (liquid)

SANS 1583

Refrigerant recycle equipment for the minimization of environmental pollution during the servicing and repair of automotive air-conditioning equipment

ARP 039

Environmental guidelines for industrial wood preservation

SANS 61000-2-5

Electromagnetic compatibility (EMC) Part 2-5: Environment - Description and classification of electromagnetic environments

SANS 61000-2-6

Electromagnetic compatibility (EMC) Part 2: Environment Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances

SANS 11201

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections

SANS 11202

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections

SANS 11204

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

SANS 12944-2

Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 2: Classification of environments

SANS 61000-2-7

Electromagnetic compatibility (EMC) Part 2: Environment Section 7: Low frequency magnetic fields in various environments

SANS 14041

Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis

SANS 8297

Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method

SANS 10397

Environmental considerations for the planning and management of telecommunication structures

SANS 14644-1

Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness

SANS 61753-2-1

Fibre optic interconnecting devices and passive components performance standard Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment

SANS 14042

Environmental management - Life cycle assessment - Life cycle impact assessment

SANS 14043

Environmental management - Life cycle assessment - Life cycle interpretation

SANS 14024

Environmental labels and declarations - Type I environmental labelling - Principles and procedures

SANS 14021

Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)

SANS 14031

Environmental management - Environmental performance evaluation - Guidelines

SANS 14020

Environmental labels and declarations - General principles

SANS 60793-1-5

Optical fibres Part 1: Generic specification Section 5: Measuring methods for environmental characteristics

SANS 14001

Environmental management systems - Requirements with guidance for use

SANS 14015

Environmental management - Environmental assessment of sites and organizations (EASO)

SANS 14644-2

Cleanrooms and associated controlled environments Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

SANS 14644-4

Cleanrooms and associated controlled environments Part 4: Design, construction and start-up

SANS 61000-2-2

Electromagnetic compatibility (EMC) Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

SANS 14049

Environmental management - Life cycle assessment - Examples of application of ISO 14041 to goal and scope definition and inventory analysis

SANS 14048

Environmental management - Life cycle assessment - Data documentation format

SANS 14004

Environmental management systems - General guidelines on principles, systems and support techniques

SANS 61000-2-4

Electromagnetic compatibility (EMC) Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

SANS 10250-1

The minimization of environmental pollution during the servicing and repair of automotive air-conditioning equipment Part 1: Establishment of procedures for the servicing and repair of road vehicles' comfort-cooling air-conditioning equipment

SANS 10250-2

The minimization of environmental pollution during the servicing and repair of automotive air-conditioning equipment Part 2: Servicing and repairs using refrigerant recycle equipment

SANS 300132-2

Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment Part 2: Operated by direct current (dc)

SANS 300132-3

Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment Part 3: Operated by rectified current source, alternating current source or direct current source up to 400 V

ISO/TS 14033:2012

Environmental management -- Quantitative environmental information -- Guidelines and examples

ISO/TR 26368:2012

Environmental damage limitation from fire-fighting water run-off

ISO 21542:2011

Building construction -- Accessibility and usability of the built environment

ISO 13315-1:2012

Environmental management for concrete and concrete structures -- Part 1: General principles

ISO 9022-1:2012

Optics and photonics -- Environmental test methods -- Part 1: Definitions, extent of testing

SANS 1760

Land mobile communication equipment - Technical characteristics and additional requirements of environmental tests

SANS 14062

Environmental management - Integrating environmental aspects into product design and development

SANS 14047

Environmental management - Life cycle impact assessment - Examples of application of SANS 14042

SANS 4524-2

Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests

SANS 60811-4-1

Insulating and sheathing materials of electric and optical cables - Common test methods Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope

SANS 2220-1-8

Electrical security systems Part 1-8: Environmental testing

SANS 10255

Health, safety and environmental guidelines for the construction and operation of timber treatment plants

SANS 101651

Electromagnetic compatibility and Radio spectrum Matters (ERM); Classification of the electromagnetic environment conditions for equipment in telecommunication networks

SANS 61000-6-2

Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments

SANS 61000-6-1

Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

SANS 1574-4

Electric flexible cables with solid extruded dielectric insulation Part 4: Rubber-insulated cables for domestic, office and similar environments (cords)

SANS 10103

The measurement and rating of environmental noise with respect to annoyance and to speech communication

SANS 10182

The measurement and assessment of acoustic environments for audiometric tests

SANS 13474

Acoustics - Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment

SANS 61000-2-12

Electromagnetic compatibility (EMC) Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SANS 61000-2-11

Electromagnetic compatibility (EMC) Part 2-11: Environment - Classification of HEMP environments

SANS 61000-6-4

Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments

SANS 14040

Environmental management - Life cycle assessment - Principles and framework

SANS 14044

Environmental management - Life cycle assessment - Requirements and guidelines

SANS 14063

Environmental management - Environmental communication - Guidelines and examples

SANS 14025

Environmental labels and declarations - Type III environmental declarations - Principles and procedures

SANS 61000-2-1

Electromagnetic compatibility (EMC) Part 2: Environment Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems

SANS 61000-2-3

Electromagnetic compatibility (EMC) Part 2: Environment Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena

SANS 61000-6-3

Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

ISO/IEC 7816-15:2004/Amd 2:2008

Error corrections and extensions for multi-application environments

SANS 204-2

Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control

SANS 10328

Methods for environmental noise impact assessments

SANS 7816-13

Identification cards - Integrated circuit cards Part 13: Commands for application management in a multi-application environment

SANS 61000-2-9

Electromagnetic compatibility (EMC) Part 2: Environment Section 9: Description of HEMP environment - Radiated disturbance - Basic EMC publication

SANS 61000-2-10

Electromagnetic compatibility (EMC) Part 2-10: Environment - Description of HEMP environment - Conducted disturbance

SANS 61000-2-13

Electromagnetic compatibility (EMC) Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted

SANS 60839-1-3

Alarm systems Part 1: General requirements Section Three: Environmental testing

ARP 720

Guide for addressing environmental issues in product standards

ISO/IEC TR 14165-312:2009

Information technology -- Fibre Channel -- Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)

SANS 5667-14

Water quality - Sampling Part 14: Guidance on quality assurance of environmental water sampling and handling

IEC 61753-061-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environments

SANS 1574-2

Electric flexible cables with solid extruded dielectric insulation Part 2: PVC insulated flexible cables for domestic, office and similar environments (cords)

ISO/IEC TR 18015:2006

Information technology -- Programming languages, their environments and system software interfaces -- Technical Report on C++ Performance

ISO 6579:2002/Amd 1:2007

Annex D: Detection of Salmonella spp. in animal faeces and in environmental samples from the primary production stage

SANS 14050

Environmental management - Vocabulary

ISO/IEC 16262:2011

Information technology -- Programming languages, their environments and system software interfaces -- ECMAScript language specification

SANS 16201

Technical aids for persons with disability - Environmental control systems for daily living

SANS 15940

Information Technology - Software engineering environment services

SANS 23045

Building environment design - Guidelines to assess energy efficiency of new buildings

SANS 61000-6-5

Electromagnetic compatibility (EMC) Part 6-5: Generic standards - Immunity for power station and substation environments

ISO 14698-2:2003

Cleanrooms and associated controlled environments -- Biocontamination control -- Part 2: Evaluation and interpretation of biocontamination data

SANS 16818

Building environment design - Energy efficiency - Terminology

ISO 26367-1:2011

Guidelines for assessing the adverse environmental impact of fire effluents -- Part 1: General

SANS 19778-2

Information technology - Learning, education and training - Collaborative technology - Collaborative workplace Part 2: Collaborative environment data model

ISO/IEC 7816-15:2004

Error corrections and extensions for multi-application environments

ISO/IEC TR 24731-2:2

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C library -- Part 2: Dynamic Allocation Functions

ISO 16175-1:2010

Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 1: Overview and statement of principles

ISO 16175-3:2010

Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 3: Guidelines and functional requirements for records in business systems

IEC 61000-6-3-am1

Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

IEC 61000-6-4-am1

Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

IEC 61753-086-6

Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment

IEC 61753-087-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category C - Controlled environment

ISO 14005:2010

Environmental management systems -- Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation

ISO 9022-9:1994

Optics and optical instruments -- Environmental test methods -- Part 9: Solar radiation

ISO 9022-12:1994

Optics and optical instruments -- Environmental test methods -- Part 12: Contamination

ISO 16201:2006

Technical aids for persons with disability -- Environmental control systems for daily living

ISO 17422:2002

Plastics -- Environmental aspects -- General guidelines for their inclusion in standards

ISO 23935:2006

Aircraft -- Environmental test procedures for airborne fluid system components -- Resistance to fire in designated fire zones

ISO 18589-3:2007

Measurement of radioactivity in the environment -- Soil -- Part 3: Measurement of gamma-emitting radionuclides

ISO 15862:2009

Space systems -- Launch-vehicle-to-spacecraft flight environments telemetry data processing

ISO 16750-4:2010

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads

IEC 60601-1-11

Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

ISO 14025:2006

Environmental labels and declarations -- Type III environmental declarations -- Principles and procedures

SANS 17422

Plastics - Environmental aspects - General guidelines for their inclusion in standards

SANS 14005

Environmental management systems - Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation

ISO 14001:2004

Environmental management systems -- Requirements with guidance for use

ISO 10218-1:2006

Robots for industrial environments -- Safety requirements -- Part 1: Robot

IEC/TR 62131-1

Environmental conditions - Vibration and shock of electrotechnical equipment - Part 1: Process for validation of dynamic data

IEC/TR 62131-2

Environmental conditions - Vibration and shock of electrotechnical equipment - Part 2: Equipment transported in fixed wing jet aircraft

IEC/TR 62131-3

Environmental conditions - Vibration and shock of electrotechnical equipment - Part 3: Equipment transported in rail vehicles

IEC/TR 62131-4

Environmental conditions - Vibration and shock of electrotechnical equipment - Part 4: Equipment transported in road vehicles

ISO 16175-2:2011

Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 2: Guidelines and functional requirements for digital records management systems

IEC 61753-141-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments

IEC/TR 61000-2-5

Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments

IEC 61747-5-2

Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules

ISO 14006:2011

Environmental management systems -- Guidelines for incorporating ecodesign

SANS 10400-XA

The application of the National Building Regulations Part X: Environmental sustainability Part XA: Energy usage in buildings

ISO/TS 16976-3:2011

Respiratory protective devices -- Human factors -- Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment

ISO 21070:2011

Ships and marine technology -- Marine environment protection -- Management and handling of shipboard garbage

IEC 60068-2-83

Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

ISO 14051:2011

Environmental management -- Material flow cost accounting -- General framework

ISO/TS 12208:2011

Space systems -- Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences

SANS 30000

Ships and marine technology - Ship recycling management systems - Specifications for management systems for safe and environmentally sound ship recycling facilities

IEC/TS 62597

Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure

ISO 18934:2011

Imaging materials -- Multiple media archives -- Storage environment

ISO/IEC TR 24733:2011

Information technology -- Programming languages, their environments and system software interfaces -- Extensions for the programming language C++ to support decimal floating-point arithmetic

IEC 62137-3

Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints

ISO/IEC TR 10182:1993

Information technology -- Programming languages, their environments and system software interfaces -- Guidelines for language bindings

ISO/IEC TR 14369:1999

Information technology -- Programming languages, their environments and system software interfaces -- Guidelines for the preparation of Language-Independent Service Specifications (LISS)

ISO/IEC TR 10000-3:1998

Information technology -- Framework and taxonomy of International Standardized Profiles -- Part 3: Principles and Taxonomy for Open System Environment Profiles

ISO/IEC TR 19769:2004

Information technology -- Programming languages, their environments and system software inferfaces -- Extensions for the programming language C to support new character data types

ISO/IEC TR 19755:2003

Information technology -- Programming languages, their environments and system software interfaces -- Object finalization for programming language COBOL

ISO/IEC TR 18057:2004

Information technology -- Telecommunications and information exchange between systems -- Using ECMA-323 (CSTA XML) in a Voice Browser Environment

ISO/IEC TR 24715:2006

Information technology -- Programming languages, their environments and system software interfaces -- Technical Report on the Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360)

ISO/IEC TR 24716:2007

Information technology -- Programming languages, their environment and system software interfaces -- Native COBOL Syntax for XML Support

ISO/IEC TR 24717:2009

Information technology -- Programming languages, their environments and system software interfaces -- Collection classes for programming language COBOL

ISO/IEC TR 24731-1:2007

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C library -- Part 1: Bounds-checking interfaces

ISO/IEC TR 24732:2009

Information technology -- Programming languages, their environments and system software interfaces -- Extension for the programming language C to support decimal floating-point arithmetic

ISO/IEC TR 29106:2007

Information technology -- Generic cabling -- Introduction to the MICE environmental classification

ISO/IEC TR 24731-2:2010

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C library -- Part 2: Dynamic Allocation Functions

ISO/IEC TR 29163-3:2009

Information technology -- Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition -- Part 3: Run-Time Environment Version 1.1

ISO/IEC 26515:2011

Systems and software engineering -- Developing user documentation in an agile environment

ISO/IEC 13719-2

Information technology -- Portable Common Tool Environment (PCTE) -- Part 2: C programming language binding

IEC 61753-087-6

Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category O - Uncontrolled environment

ISO GUIDE 64

Guide for addressing environmental issues in product standards

ISO/IEC 7816-13

Identification cards -- Integrated circuit cards -- Part 13: Commands for application management in a multi-application environment

ISO/IEC 7816-15-am2

Amendment 2 - Identification cards -- Integrated circuit cards -- Part 15: Cryptographic information application - Error corrections and extensions for multi-application environments

ISO/IEC 9282-1

Traitement de l'information -- Représentation codée de l'image -- Partie 1: Principes de codage pour la représentation d'image dans un environnement codé à 7 et à 8 éléments

ISO/IEC 9973

Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items

ISO/IEC/TR 10000-3

Information technology -- Framework and taxonomy of International Standardized Profiles -- Part 3: Principles and Taxonomy for Open System Environment Profiles

ISO/IEC/TR 10182

Information technology -- Programming languages, their environments and system software interfaces -- Guidelines for language bindings

ISO/IEC 11172-1

Technologies de l'information -- Codage de l'image animée et du son associé pour les supports de stockage numérique jusqu'à environ 1,5 Mbit/s -- Partie 1: Systèmes

ISO/IEC 11172-2

Technologies de l'information -- Codage de l'image animée et du son associé pour les supports de stockage numérique jusqu'à environ 1,5 Mbit/s -- Partie 2: Vidéo

ISO/IEC 11172-3

Technologies de l'information -- Codage de l'image animée et du son associé pour les supports de stockage numérique jusqu'à environ 1,5 Mbit/s -- Partie 3: Audio

ISO/IEC 13719-3

Information technology -- Portable common tool environment (PCTE) -- Part 3: Ada programming language binding

ISO/IEC 13719-4

Information technology -- Portable Common Tool Environment (PCTE) -- Part 4: IDL binding (Interface Definition Language)

ISO/IEC 13719-1

Information technology -- Portable Common Tool Environment (PCTE) -- Part 1: Abstract specification

ISO/IEC 13751

Information technology -- Programming languages, their environments and system software interfaces -- Programming language Extended APL

ISO/IEC 13816

Information technology -- Programming languages, their environments and system software interfaces -- Programming language ISLISP

ISO/IEC/TR 14369

Information technology -- Programming languages, their environments and system software interfaces -- Guidelines for the preparation of Language-Independent Service Specifications (LISS)

ISO/IEC 14478-1

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 1: Fundamentals of PREMO

ISO/IEC 14478-2

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 2: Foundation Component

ISO/IEC 14478-3

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 3: Multimedia Systems Services

ISO/IEC 14478-4

Information technology -- Computer graphics and image processing -- Presentation Environment for Multimedia Objects (PREMO) -- Part 4: Modelling, rendering and interaction component

ISO/IEC 15940

Systems and software engineering -- Software Engineering Environment Services

ISO/IEC 16262

Information technology - Programming languages, their environments and system software interfaces - ECMAScript language specification

ISO/IEC/TR 18015

Information technology -- Programming languages, their environments and system software interfaces -- Technical Report on C++ Performance

ISO/IEC 18025

Information technology -- Environmental Data Coding Specification (EDCS)

ISO/IEC 18041-4

Information technology -- Computer graphics, image processing and environmental data representation -- Environmental Data Coding Specification (EDCS) language bindings -- Part 4: C

ISO/IEC/TR 18057

Information technology -- Telecommunications and information exchange between systems -- Using ECMA-323 (CSTA XML) in a Voice Browser Environment

ISO/IEC/TR 19755

Information technology -- Programming languages, their environments and system software interfaces -- Object finalization for programming language COBOL

ISO/IEC/TR 19769

Information technology -- Programming languages, their environments and system software inferfaces -- Extensions for the programming language C to support new character data types

ISO/IEC 19776-1

Information technology -- Computer graphics, image processing and environmental data representation -- Extensible 3D (X3D) encodings -- Part 1: Extensible Markup Language (XML) encoding

ISO/IEC 19776-2

Information technology -- Computer graphics, image processing and environmental data representation -- Extensible 3D (X3D) encodings -- Part 2: Classic VRML encoding

ISO/IEC 19776-3

Information technology -- Computer graphics, image processing and environmental data representation -- Extensible 3D (X3D) encodings -- Part 3: Compressed binary encoding

ISO/IEC 19778-2

Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 2: Collaborative environment data model

ISO/IEC 20970

Information technology -- Programming languages, their environments and system software interfaces -- JEFF file format

ISO/IEC/TR 24715

Information technology -- Programming languages, their environments and system software interfaces -- Technical Report on the Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360)

ISO/IEC/TR 24716

Information technology -- Programming languages, their environment and system software interfaces -- Native COBOL Syntax for XML Support

ISO/IEC/TR 24717

Information technology -- Programming languages, their environments and system software interfaces -- Collection classes for programming language COBOL

ISO/IEC/TR 24731-1

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C library -- Part 1: Bounds-checking interfaces

ISO/IEC/TR 24731-2

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C library -- Part 2: Dynamic Allocation Functions

ISO/IEC/TR 24732

Information technology -- Programming languages, their environments and system software interfaces -- Extension for the programming language C to support decimal floating-point arithmetic

ISO/IEC/TR 24733

Information technology -- Programming languages, their environments and system software interfaces -- Extensions for the programming language C++ to support decimal floating-point arithmetic

ISO/IEC 24747

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C Library to support mathematical special functions

ISO/IEC 24756

Information technology -- Framework for specifying a common access profile (CAP) of needs and capabilities of users, systems, and their environments

ISO/IEC 24771

Information technology -- Telecommunications and information exchange between systems -- MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment

ISO/IEC/TR 29106-am1

Amendment 1 - Information technology - Generic cabling - Introduction to the MICE environmental classification

ISO/IEC 26515

Systems and software engineering -- Developing user documentation in an agile environment

ISO/IEC 29124

Information technology -- Programming languages, their environments and system software interfaces -- Extensions to the C++ Library to support mathematical special functions

ISO/IEC/TR 29163-3

Information technology -- Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition -- Part 3: Run-Time Environment Version 1.1

IEC 61988-4-2

Plasma display panels - Part 4-2: Environmental testing methods - Panel strength

IEC 60601-1-11:2010

Medical electrical equipment -- Part 1-11: General requirements for basic safety and essential performance -- Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

ISO 2678:1985

Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment

ISO 16121-4:2005

Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 4: Cabin environment

ISO 9022-1:1994

Optics and optical instruments -- Environmental test methods -- Part 1: Definitions, extent of testing

ISO/IEC/IEEE 26515:2011

Systems and software engineering -- Developing user documentation in an agile environment

ISO 19011:2002

Guidelines for quality and/or environmental management systems auditing

ISO 13281:1997

Industrial automation systems -- Manufacturing Automation Programming Environment (MAPLE) -- Functional architecture

ISO/IEC/TS 17021-2

Évaluation de la conformité -- Exigences pour les organismes procédant à l'audit et à la certification des systèmes de management -- Partie 2: Exigences de compétence pour l'audit et la certification des systèmes de management environnemental

ISO 11204:2010

Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

ISO 10218-1:2006

Robots for industrial environments -- Safety requirements -- Part 1: Robot

SANS 204-2

Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control

IEC 60794-1-22

Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental tests methods

ISO 28802:2012

Ergonomics of the physical environment -- Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people

ISO 28803:2012

Ergonomics of the physical environment -- Application of International Standards to people with special requirements

ISO 28902-1:2012

Air quality -- Environmental meteorology -- Part 1: Ground-based remote sensing of visual range by lidar

ISO 9022-22:2012

Optics and photonics -- Environmental test methods -- Part 22: Combined cold, dry heat or temperature change with bump or random vibration

ISO 11855-5:2012

Building environment design -- Design , dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 5: Installation

ISO 14242-1:2012

Implants for surgery -- Wear of total hip-joint prostheses -- Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

ISO 9225:2012

Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of environmental parameters affecting corrosivity of atmospheres

ISO/TR 14049:2012

Environmental management -- Life cycle assessment -- Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SANS 14010

Guidelines for environmental auditing - General principles

SANS 14011

Guidelines for environmental auditing - Audit procedures - Auditing of environmental management systems

SANS 14012

Guidelines for environmental auditing - Qualification criteria for environmental auditors

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

ARP 020

Sound impact investigations for integrated environmental management

ARP 036

Guide to environmental management system requirements

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

IEC 61753-056-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment

IEC 61753-091-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environments

IEC 61753-143-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment

IEC 61753-089-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

IEC 61753-057-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment

IEC 61753-058-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment

SANS 1574-2

Electric flexible cables with solid extruded dielectric insulation Part 2: PVC insulated flexible cables for domestic, office and similar environments (cords)

IEC 62387

Radiation protection instrumentation - Passive integrating dosimetry systems for personal and environmental monitoring of photon and beta radiation

SANS 60601-1-11

Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

SATS 17021-2

Conformity assessment - Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems

ISO/IEC 29106

Information technology - Generic cabling - Introduction to the MICE environmental classification

ISO/IEC 29142-3

Information technology -- Print cartridge characterization -- Part 3: Environment

IEC 61753-059-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment

IEC 61753-088-2

Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments

IEC 61753-021-3

Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment

IEC 62706

Radiation protection instrumentation - Environmental, electromagnetic and mechanical performance requirements

IEC/TR 62785

Guidance on the environmentally conscious design of fibre optics related products and subsystems

ISO/IEC/TR 14165-313

Information technology - Fibre channel - Part 313: Avionics environment - Anonymous synchronous messaging (FC-AE-ASM)

ISO/IEC/TR 14165-314

Information technology - Fibre channel - Part 314: Avionics environment - Remote direct memory access (FC-AE-RDMA)

IEC 60601-1-9-am1

Amendment 1 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 62040-4

Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting

IEC 62542

Environmental standardization for electrical and electronic products and systems - Glossary of terms

SANS 7243

Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)