Page Header

Safety & Security - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the Safety & Security processes, equipment, accessories, services and standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Safety & Security Industry. This scheme provides the Safety & Security components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 26322-2:2010

Tractors for agriculture and forestry -- Safety -- Part 2: Narrow-track and small tractors

ISO 29042-1:2008

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 1: Selection of test methods

ISO 16653-3:2011

Mobile elevating work platforms -- Design calculations safety requirements and test methods relative to special features -- Part 3: MEWPs for orchard operations

ISO 11148-4:2010

Hand-held non-electric power tools -- Safety requirements -- Part 4: Non-rotary percussive power tools

ISO 8124-4:2010

Safety of toys -- Part 4: Swings slides and similar activity toys for indoor and outdoor family domestic use

ISO 22538-1:2007

Space systems -- Oxygen safety -- Part 1: Design of oxygen systems and components

ISO 11148-6:2010

Hand-held non-electric power tools -- Safety requirements -- Part 6: Assembly power tools for threaded fasteners

ISO 25119-3:2010

Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 3: Series development hardware and software

ISO 25119-2:2010

Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 2: Concept phase

ISO/TS 25238:2007

Health informatics -- Classification of safety risks from health software

ISO 13856-3:2006

Safety of machinery -- Pressure-sensitive protective devices -- Part 3: General principles for the design and testing of pressure-sensitive bumpers plates wires and similar devices

ISO 24802-1:2007

Recreational diving services -- Safety related minimum requirements for the training of scuba instructors -- Part 1: Level 1

ISO 15011-2:2009

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 2: Determination of the emission rates of carbon monoxide (CO) carbon dioxide (CO2) nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding cutting and gouging

ISO/TR 16738:2009

Fire-safety engineering -- Technical information on methods for evaluating behaviour and movement of people

ISO 4254-11:2010

Agricultural machinery -- Safety -- Part 11: Pick-up balers

ISO 24801-3:2007

Recreational diving services -- Safety related minimum requirements for the training of recreational scuba divers -- Part 3: Level 3 -- Dive leader

ISO 13943:2008

Fire safety -- Vocabulary

ISO/TS 22002-1:2009

Prerequisite programmes on food safety -- Part 1: Food manufacturing

ISO 27467:2009

Nuclear criticality safety -- Analysis of a postulated criticality accident

ISO 4254-9:2008

Agricultural machinery -- Safety -- Part 9: Seed drills

ISO 80601-2-56:2009

Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement

ISO 15752:2010

Ophthalmic instruments -- Endoilluminators -- Fundamental requirements and test methods for optical radiation safety

ISO 4254-8:2009

Agricultural machinery -- Safety -- Part 8: Solid fertilizer distributors

ISO 8995-3:2006

Lighting of work places -- Part 3: Lighting requirements for safety and security of outdoor work places

ISO/TR 11071-2:2006

Comparison of worldwide lift safety standards -- Part 2: Hydraulic lifts (elevators)

ISO 8124-2:2007

Safety of toys -- Part 2: Flammability

ISO 21873-2:2009

Building construction machinery and equipment -- Mobile crushers -- Part 2: Safety requirements

ISO Guide 78:2008

Safety of machinery -- Rules for drafting and presentation of safety standards

IEC 80601-2-30:2009

Medical electrical equipment -- Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers

ISO 11014:2009

Safety data sheet for chemical products -- Content and order of sections

IEC 60601-1-10:2007

Medical electrical equipment -- Part 1-10: General requirements for basic safety and essential performance -- Collateral standard: Requirements for the development of physiologic closed-loop controllers

ISO 28139:2009

Agricultural and forestry machinery -- Knapsack combustion-engine-driven mistblowers -- Safety requirements

ISO 20474-13:2008

Earth-moving machinery -- Safety -- Part 13: Requirements for rollers

ISO/TR 17252:2008

Fire tests -- Applicability of reaction to fire tests to fire modelling and fire safety engineering

ISO/TR 27809:2007

Health informatics -- Measures for ensuring patient safety of health software

ISO 8124-3:2010

Safety of toys -- Part 3: Migration of certain elements

ISO 20957-10:2007

Stationary training equipment -- Part 10: Exercise bicycles with a fixed wheel or without freewheel additional specific safety requirements and test methods

ISO 10975:2009

Tractors and machinery for agriculture -- Auto-guidance systems for operator-controlled tractors and self-propelled machines -- Safety requirements

IEC 80601-2-59:2008

Medical electrical equipment -- Part 2-59: Particular requirements for basic safety and essential performance of screening thermographs for human febrile temperature screening

ISO 22538-2:2007

Space systems -- Oxygen safety -- Part 2: Selection of metallic materials for oxygen systems and components

ISO 22538-5:2010

Space systems -- Oxygen safety -- Part 5: Operational and emergency procedures

ISO 6469-2:2009

Electrically propelled road vehicles -- Safety specifications -- Part 2: Vehicle operational safety means and protection against failures

ISO 22201:2009

Lifts (elevators) -- Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL)

ISO 12401:2009

Small craft -- Deck safety harness and safety line -- Safety requirements and test methods

ISO 25119-1:2010

Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 1: General principles for design and development

IEC 60601-1-11:2010

Medical electrical equipment -- Part 1-11: General requirements for basic safety and essential performance -- Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

ISO 29042-2:2009

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

ISO 6469-1:2009

Electrically propelled road vehicles -- Safety specifications -- Part 1: On-board rechargeable energy storage system (RESS)

ISO 25119-4:2010

Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 4: Production operation modification and supporting processes

ISO 29042-3:2009

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 3: Test bench method for the measurement of the emission rate of a given pollutant

ISO 29042-4:2009

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system

ISO 4413:2010

Hydraulic fluid power -- General rules and safety requirements for systems and their components

ISO/TS 20474-14:2008

Earth-moving machinery -- Safety -- Part 14: Information on national and regional provisions

ISO 18911:2010

Imaging materials -- Processed safety photographic films -- Storage practices

IEC 80601-2-58:2008

Medical electrical equipment -- Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

ISO 22538-3:2007

Space systems -- Oxygen safety -- Part 3: Selection of non-metallic materials for oxygen systems and components

ISO 22538-4:2007

Space systems -- Oxygen safety -- Part 4: Hazards analyses for oxygen systems and components

ISO/IEC 14762:2009

Information technology -- Functional safety requirements for Home and Building Electronic Systems (HBES)

ISO 4414:2010

Pneumatic fluid power -- General rules and safety requirements for systems and their components

ISO 22702:2003/Amd 1:2008

Clarification of requirements and addition of safety symbols

ISO 23932:2009

Fire safety engineering -- General principles

ISO 15011-3:2009

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 3: Determination of ozone emission rate during arc welding

ISO 24801-2:2007

Recreational diving services -- Safety related minimum requirements for the training of recreational scuba divers -- Part 2: Level 2 -- Autonomous diver

ISO 9994:2005

Lighters -- Safety specification

ISO 23601:2009

Safety identification -- Escape and evacuation plan signs

IEC 60601-1-8:2006

Medical electrical equipment -- Part 1-8: General requirements for basic safety and essential performance -- Collateral standard: General requirements tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

ISO 16368:2010

Mobile elevating work platforms -- Design calculations safety requirements and test methods

ISO/TR 14121-2:2007

Safety of machinery -- Risk assessment -- Part 2: Practical guidance and examples of methods

ISO 24801-1:2007

Recreational diving services -- Safety related minimum requirements for the training of recreational scuba divers -- Part 1: Level 1 -- Supervised diver

ISO 24802-2:2007

Recreational diving services -- Safety related minimum requirements for the training of scuba instructors -- Part 2: Level 2

IWA 3:2005

Image safety -- Reducing the incidence of undesirable biomedical effects caused by visual image sequences

ISO/TS 24679:2011

Fire safety engineering -- Performance of structures in fire

ISO 24978:2009

Intelligent transport systems -- ITS Safety and emergency messages using any available wireless media -- Data registry procedures

ISO 15011-1:2009

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis

ISO 15012-2:2008

Health and safety in welding and allied processes -- Requirements testing and marking of equipment for air filtration -- Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles

ISO 21628:2008

Gardening machinery -- Powered material-collecting systems -- Safety

ISO 20474-2:2008

Earth-moving machinery -- Safety -- Part 2: Requirements for tractor-dozers

ISO 23273-2:2006

Fuel cell road vehicles -- Safety specifications -- Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen

ISO 24409-1:2010

Ships and marine technology -- Design location and use of shipboard safety signs safety-related signs safety notices and safety markings -- Part 1: Design principles

ISO/TS 22240:2008

Road vehicles -- Vehicles safety information model (VSIM)

ISO 16110-1:2007

Hydrogen generators using fuel processing technologies -- Part 1: Safety

ISO 12643-2:2007

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 2: Press equipment and systems

ISO 16730:2008

Fire safety engineering -- Assessment verification and validation of calculation methods

ISO 20474-3:2008

Earth-moving machinery -- Safety -- Part 3: Requirements for loaders

ISO 20474-7:2008

Earth-moving machinery -- Safety -- Part 7: Requirements for scrapers

ISO 20474-10:2008

Earth-moving machinery -- Safety -- Part 10: Requirements for trenchers

ISO 15236-3:2007

Steel cord conveyor belts -- Part 3: Special safety requirements for belts for use in underground installations

ISO 12402-2:2006

Personal flotation devices -- Part 2: Lifejackets performance level 275 -- Safety requirements

ISO 12402-6:2006

Personal flotation devices -- Part 6: Special purpose lifejackets and buoyancy aids -- Safety requirements and additional test methods

ISO 20474-1:2008

Earth-moving machinery -- Safety -- Part 1: General requirements

ISO 22896:2006

Road vehicles -- Deployment and sensor bus for occupant safety systems

ISO 17080:2005

Manually portable agricultural and forestry machines and powered lawn and garden equipment -- Design principles for single-panel product safety labels

ISO 13855:2010

Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body

ISO 12643-3:2008

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 3: Binding and finishing equipment and systems

ISO 23551-2:2006

Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 2: Pressure regulators

ISO 23125:2010

Machine tools -- Safety -- Turning machines

ISO 20474-5:2008

Earth-moving machinery -- Safety -- Part 5: Requirements for hydraulic excavators

ISO 12402-7:2006

Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods

ISO/PAS 22853:2005

Ships and marine technology -- Computer applications -- Specification of Maritime Safety Markup Language (MSML)

ISO 23273-3:2006

Fuel cell road vehicles -- Safety specifications -- Part 3: Protection of persons against electric shock

ISO/TR 11071-1:2004

Comparison of worldwide lift safety standards -- Part 1: Electric lifts (elevators)

ISO 12402-3:2006

Personal flotation devices -- Part 3: Lifejackets performance level 150 -- Safety requirements

ISO 12402-8:2006

Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods

ISO 4254-10:2009

Agricultural machinery -- Safety -- Part 10: Rotary tedders and rakes

ISO 26322-1:2008

Tractors for agriculture and forestry -- Safety -- Part 1: Standard tractors

ISO 13837:2008

Road vehicles -- Safety glazing materials -- Method for the determination of solar transmittance

ISO 23552-1:2007

Safety and control devices for gas and/or oil burners and gas and/or oil appliances -- Particular requirements -- Part 1: Fuel/air ratio controls electronic type

ISO 20957-7:2005

Stationary training equipment -- Part 7: Rowing machines additional specific safety requirements and test methods

ISO 14314:2004

Reciprocal internal combustion engines -- Recoil starting equipment -- General safety requirements

ISO 13856-2:2005

Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars

ISO/TS 22003:2007

Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems

ISO/TS 15011-5:2006

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials

ISO 20712-2:2007

Water safety signs and beach safety flags -- Part 2: Specifications for beach safety flags -- Colour shape meaning and performance

ISO/TR 14799-2:2005

Comparison of worldwide escalator and moving walk safety standards -- Part 2: Abbreviated comparison and comments

ISO 16653-2:2009

Mobile elevating work platforms -- Design calculations safety requirements and test methods relative to special features -- Part 2: MEWPs with non-conductive (insulating) components

ISO 11681-2:2006

Machinery for forestry -- Portable chain-saw safety requirements and testing -- Part 2: Chain-saws for tree service

ISO 13850:2006

Safety of machinery -- Emergency stop -- Principles for design

ISO 20712-3:2008

Water safety signs and beach safety flags -- Part 3: Guidance for use

ISO 13857:2008

Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs

ISO 15012-1:2004

Health and safety in welding and allied processes -- Requirements testing and marking of equipment for air filtration -- Part 1: Testing of the separation efficiency for welding fume

ISO 23553-1:2007

Safety and control devices for oil burners and oil-burning appliances -- Particular requirements -- Part 1: Shut-off devices for oil burners

ISO 3864-3:2006

Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols for use in safety signs

ISO 10517:2009

Powered hand-held hedge trimmers -- Safety

ISO 16735:2006

Fire safety engineering -- Requirements governing algebraic equations -- Smoke layers

ISO 16653-1:2008

Mobile elevating work platforms -- Design calculations safety requirements and test methods relative to special features -- Part 1: MEWPs with retractable guardrail systems

ISO 9244:2008

Earth-moving machinery -- Machine safety labels -- General principles

ISO/TS 22559-2:2010

Safety requirements for lifts (elevators) -- Part 2: Safety parameters meeting the global essential safety requirements (GESRs)

ISO 20957-4:2005

Stationary training equipment -- Part 4: Strength training benches additional specific safety requirements and test methods

ISO 8230-3:2008

Safety requirements for dry-cleaning machines -- Part 3: Machines using combustible solvents

ISO 20957-9:2005

Stationary training equipment -- Part 9: Elliptical trainers additional specific safety requirements and test methods

ISO 8230-2:2008

Safety requirements for dry-cleaning machines -- Part 2: Machines using perchloroethylene

ISO/TR 14799-1:2005

Comparison of worldwide escalator and moving walk safety standards -- Part 1: Rule by rule comparison

ISO 19353:2005

Safety of machinery -- Fire prevention and protection

ISO/TS 22004:2005

Food safety management systems -- Guidance on the application of ISO 22000:2005

ISO 20957-5:2005

Stationary training equipment -- Part 5: Pedal crank training equipment additional specific safety requirements and test methods

ISO 20957-8:2005

Stationary training equipment -- Part 8: Steppers stairclimbers and climbers -- Additional specific safety requirements and test methods

ISO 19432:2006

Building construction machinery and equipment -- Portable hand-held internal combustion engine driven cut-off machines -- Safety requirements and testing

ISO 20712-1:2008

Water safety signs and beach safety flags -- Part 1: Specifications for water safety signs used in workplaces and public areas

ISO 18893:2004

Mobile elevating work platforms -- Safety principles inspection maintenance and operation

ISO 16736:2006

Fire safety engineering -- Requirements governing algebraic equations -- Ceiling jet flows

ISO 12543-2:2004

Glass in building -- Laminated glass and laminated safety glass -- Part 2: Laminated safety glass

ISO/TS 16733:2006

Fire safety engineering -- Selection of design fire scenarios and design fires

ISO 10418:2003

Petroleum and natural gas industries -- Offshore production installations -- Analysis design installation and testing of basic surface process safety systems

ISO 23551-1:2006

Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 1: Automatic valves

ISO 3691-5:2009

Industrial trucks -- Safety requirements and verification -- Part 5: Pedestrian-propelled trucks

ISO 4254-6:2009

Agricultural machinery -- Safety -- Part 6: Sprayers and liquid fertilizer distributors

ISO 23551-3:2005

Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 3: Gas/air ratio controls pneumatic type

ISO 23551-4:2005

Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 4: Valve-proving systems for automatic shut-off valves

ISO 14624-5:2006

Space systems -- Safety and compatibility of materials -- Part 5: Determination of reactivity of system/component materials with aerospace propellants

ISO 12643-5:2010

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 5: Stand-alone platen presses

ISO 16734:2006

Fire safety engineering -- Requirements governing algebraic equations -- Fire plumes

ISO 14624-6:2006

Space systems -- Safety and compatibility of materials -- Part 6: Determination of reactivity of processing materials with aerospace fluids

ISO 14943:2004

Nuclear fuel technology -- Administrative criteria related to nuclear criticality safety

ISO 15442:2005

Cranes -- Safety requirements for loader cranes

ISO 11111-1:2009

Textile machinery -- Safety requirements -- Part 1: Common requirements

ISO 14624-7:2006

Space systems -- Safety and compatibility of materials -- Part 7: Determination of permeability and penetration of materials to aerospace fluids

ISO/TS 16732:2005

Fire safety engineering -- Guidance on fire risk assessment

ISO 20957-6:2005

Stationary training equipment -- Part 6: Treadmills additional specific safety requirements and test methods

ISO 11553-2:2007

Safety of machinery -- Laser processing machines -- Part 2: Safety requirements for hand-held laser processing devices

ISO 16737:2006

Fire safety engineering -- Requirements governing algebraic equations -- Vent flows

ISO 4254-5:2008

Agricultural machinery -- Safety -- Part 5: Power-driven soil-working machines

ISO 8230-1:2008

Safety requirements for dry-cleaning machines -- Part 1: Common safety requirements

ISO 500-1:2004

Agricultural tractors -- Rear-mounted power take-off types 1 2 and 3 -- Part 1: General specifications safety requirements dimensions for master shield and clearance zone

ISO 22000:2005

Food safety management systems -- Requirements for any organization in the food chain

ISO 21469:2006

Safety of machinery -- Lubricants with incidental product contact -- Hygiene requirements

ISO 10651-2:2004

Lung ventilators for medical use -- Particular requirements for basic safety and essential performance -- Part 2: Home care ventilators for ventilator-dependent patients

IEC 60601-2-52:2009

Medical electrical equipment -- Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

ISO/TR 22898:2006

Review of outputs for fire containment tests for buildings in the context of fire safety engineering

ISO 14120:2002

Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards

ISO 4126-1:2004

Safety devices for protection against excessive pressure -- Part 1: Safety valves

ISO 21750:2006

Road vehicles -- Safety enhancement in conjunction with tyre inflation pressure monitoring

ISO 11161:2007

Safety of machinery -- Integrated manufacturing systems -- Basic requirements

ISO 4126-9:2008

Safety devices for protection against excessive pressure -- Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices

ISO 12402-1:2005

Personal flotation devices -- Part 1: Lifejackets for seagoing ships -- Safety requirements

ISO 20474-8:2008

Earth-moving machinery -- Safety -- Part 8: Requirements for graders

ISO 10432:2004

Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment

ISO 20957-2:2005

Stationary training equipment -- Part 2: Strength training equipment additional specific safety requirements and test methods

ISO 4254-7:2008

Agricultural machinery -- Safety -- Part 7: Combine harvesters forage harvesters and cotton harvesters

ISO 10218-1:2006

Robots for industrial environments -- Safety requirements -- Part 1: Robot

ISO 12643-2:2010

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 2: Prepress and press equipment and systems

ISO 21789:2009

Gas turbine applications -- Safety

ISO/TR 23849:2010

Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery

ISO 11681-1:2004

Machinery for forestry -- Portable chain-saw safety requirements and testing -- Part 1: Chain-saws for forest service

ISO 6218:2005

Inland navigation vessels -- Manually operated coupling devices for push tows -- Safety requirements and main dimensions

ISO/TS 22559-1:2004

Safety requirements for lifts (elevators) -- Part 1: Global essential safety requirements (GESRs)

ISO 4126-4:2004

Safety devices for protection against excessive pressure -- Part 4: Pilot-operated safety valves

ISO 13849-2:2003

Safety of machinery -- Safety-related parts of control systems -- Part 2: Validation

ISO 15011-4:2006

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 4: Fume data sheets

ISO 10651-6:2004

Lung ventilators for medical use -- Particular requirements for basic safety and essential performance -- Part 6: Home-care ventilatory support devices

ISO 12643-3:2010

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 3: Binding and finishing equipment and systems

ISO 13851:2002

Safety of machinery -- Two-hand control devices -- Functional aspects and design principles

ISO 10651-5:2006

Lung ventilators for medical use -- Particular requirements for basic safety and essential performance -- Part 5: Gas-powered emergency resuscitators

ISO 4126-7:2004

Safety devices for protection against excessive pressure -- Part 7: Common data

ISO 21005:2004

Ships and marine technology -- Thermally toughened safety-glass panes for windows and side scuttles

ISO 4126-2:2003

Safety devices for protection against excessive pressure -- Part 2: Bursting disc safety devices

ISO 22702:2003

Utility lighters -- General consumer-safety requirements

ISO/TR 18569:2004

Safety of machinery -- Guidelines for the understanding and use of safety of machinery standards

ISO 4126-6:2003

Safety devices for protection against excessive pressure -- Part 6: Application selection and installation of bursting disc safety devices

ISO 14624-3:2005

Space systems -- Safety and compatibility of materials -- Part 3: Determination of offgassed products from materials and assembled articles

ISO 17846:2004

Welding and allied processes -- Health and safety -- Wordless precautionary labels for equipment and consumables used in arc welding and cutting

ISO 13849-1:2006

Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design

ISO 21647:2004

Medical electrical equipment -- Particular requirements for the basic safety and essential performance of respiratory gas monitors

ISO 4126-5:2004

Safety devices for protection against excessive pressure -- Part 5: Controlled safety pressure relief systems (CSPRS)

ISO/TR 18690:2006

Guidance for the selection use and maintenance of safety protective and occupational footwear

ISO 4126-3:2006

Safety devices for protection against excessive pressure -- Part 3: Safety valves and bursting disc safety devices in combination

ISO 5673-1:2005

Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 1: General manufacturing and safety requirements

ISO 9386-1:2000

Power-operated lifting platforms for persons with impaired mobility -- Rules for safety dimensions and functional operation -- Part 1: Vertical lifting platforms

ISO 9386-2:2000

Power-operated lifting platforms for persons with impaired mobility -- Rules for safety dimensions and functional operation -- Part 2: Powered stairlifts for seated standing and wheelchair users moving in an inclined plane

ISO 11111-6:2005

Textile machinery -- Safety requirements -- Part 6: Fabric manufacturing machinery

ISO/TR 16765:2003

Comparison of worldwide safety standards on lifts for firefighters

ISO 15998:2008

Earth-moving machinery -- Machine-control systems (MCS) using electronic components -- Performance criteria and tests for functional safety

ISO 15870:2000

Powered industrial trucks -- Safety signs and hazard pictorials -- General principles

ISO 11111-5:2005

Textile machinery -- Safety requirements -- Part 5: Preparatory machinery to weaving and knitting

ISO 15817:2005

Earth-moving machinery -- Safety requirements for remote operator control

ISO 14624-4:2003

Space systems -- Safety and compatibility of materials -- Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments

ISO/TR 15916:2004

Basic considerations for the safety of hydrogen systems

ISO 14620-1:2002

Space systems -- Safety requirements -- Part 1: System safety

ISO 15027-2:2002

Immersion suits -- Part 2: Abandonment suits requirements including safety

ISO 14624-2:2003

Space systems -- Safety and compatibility of materials -- Part 2: Determination of flammability of electrical-wire insulation and accessory materials

ISO 10079-1:1999

Medical suction equipment -- Part 1: Electrically powered suction equipment -- Safety requirements

IEC 80601-2-35:2009

Medical electrical equipment -- Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets pads or mattresses and intended for heating in medical use

ISO 15615:2002

Gas welding equipment -- Acetylene manifold systems for welding cutting and allied processes -- Safety requirements in high-pressure devices

ISO 15928-1:2003

Houses -- Description of performance -- Part 1: Structural safety

ISO 11111-3:2005

Textile machinery -- Safety requirements -- Part 3: Nonwoven machinery

ISO 15717:1998

Kitchen equipment -- Safety requirements and test methods for kitchen cabinets and work tops

ISO 3537:1999

Road vehicles -- Safety glazing materials -- Mechanical tests

ISO 16069:2004

Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS)

ISO 14624-1:2003

Space systems -- Safety and compatibility of materials -- Part 1: Determination of upward flammability of materials

ISO 11111-4:2005

Textile machinery -- Safety requirements -- Part 4: Yarn processing cordage and rope manufacturing machinery

ISO 14620-2:2000

Space systems -- Safety requirements -- Part 2: Launch site operations

ISO 11111-2:2005

Textile machinery -- Safety requirements -- Part 2: Spinning preparatory and spinning machines

ISO 15534-2:2000

Ergonomic design for the safety of machinery -- Part 2: Principles for determining the dimensions required for access openings

ISO 8124-1:2009

Safety of toys -- Part 1: Safety aspects related to mechanical and physical properties

ISO 11111-7:2005

Textile machinery -- Safety requirements -- Part 7: Dyeing and finishing machinery

ISO 11680-2:2000

Machinery for forestry -- Safety requirements and testing for pole-mounted powered pruners -- Part 2: Units for use with a back-pack power source

ISO 14123-1:1998

Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers

ISO 14123-2:1998

Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures

ISO 13854:1996

Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body

ISO 6966-2:2005

Aircraft ground equipment -- Basic requirements -- Part 2: Safety requirements

ISO 29042-8:2011

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 8: Room method for the measurement of the pollutant concentration parameter

ISO 13856-1:2001

Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

ISO 8359:1996

Oxygen concentrators for medical use -- Safety requirements

ISO 10472-6:1997

Safety requirements for industrial laundry machinery -- Part 6: Ironing and fusing presses

ISO 10417:2004

Petroleum and natural gas industries -- Subsurface safety valve systems -- Design installation operation and redress

IEC 60601-2-12:2001

Medical electrical equipment -- Part 2-12: Particular requirements for the safety of lung ventilators -- Critical care ventilators

ISO 3977-9:1999

Gas turbines -- Procurement -- Part 9: Reliability availability maintainability and safety

ISO 12543-6:1998

Glass in building -- Laminated glass and laminated safety glass -- Part 6: Appearance

ISO 11680-1:2000

Machinery for forestry -- Safety requirements and testing for pole-mounted powered pruners -- Part 1: Units fitted with an integral combustion engine

ISO 3864-1:2002

Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs in workplaces and public areas

ISO 14119:1998

Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection

ISO 14122-1:2001

Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of fixed means of access between two levels

ISO 14159:2002

Safety of machinery -- Hygiene requirements for the design of machinery

ISO 14118:2000

Safety of machinery -- Prevention of unexpected start-up

ISO 10472-2:1997

Safety requirements for industrial laundry machinery -- Part 2: Washing machines and washer-extractors

ISO 10131-2:1997

Foldaway beds -- Safety requirements and tests -- Part 2: Test methods

ISO 29042-9:2011

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 9: Decontamination index

ISO 10472-1:1997

Safety requirements for industrial laundry machinery -- Part 1: Common requirements

ISO 11553-1:2005

Safety of machinery -- Laser processing machines -- Part 1: General safety requirements

ISO 9851:1990

Continuous mechanical handling equipment -- Overhead electrical monorail conveyors -- Definitions and safety rules

ISO 10472-4:1997

Safety requirements for industrial laundry machinery -- Part 4: Air dryers

ISO 7175-1:1997

Children's cots and folding cots for domestic use -- Part 1: Safety requirements

ISO 10131-1:1997

Foldaway beds -- Safety requirements and tests -- Part 1: Safety requirements

ISO 10472-3:1997

Safety requirements for industrial laundry machinery -- Part 3: Washing tunnel lines including component machines

ISO 10472-5:1997

Safety requirements for industrial laundry machinery -- Part 5: Flatwork ironers feeders and folders

ISO 11102-1:1997

Reciprocating internal combustion engines -- Handle starting equipment -- Part 1: Safety requirements and tests

ISO 6309:1987

Fire protection -- Safety signs

ISO 6178:1983

Centrifuges -- Construction and safety rules -- Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor

ISO 4254-1:2008

Agricultural machinery -- Safety -- Part 1: General requirements

ISO 12543-3:1998

Glass in building -- Laminated glass and laminated safety glass -- Part 3: Laminated glass

ISO 7149:1982

Continuous handling equipment -- Safety code -- Special rules

ISO 12543-4:1998

Glass in building -- Laminated glass and laminated safety glass -- Part 4: Test methods for durability

ISO/TR 16142:2006

Medical devices -- Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices

ISO 12402-4:2006

Personal flotation devices -- Part 4: Lifejackets performance level 100 -- Safety requirements

ISO 20474-4:2008

Earth-moving machinery -- Safety -- Part 4: Requirements for backhoe-loaders

ISO 3165:1976

Sampling of chemical products for industrial use -- Safety in sampling

ISO 20474-9:2008

Earth-moving machinery -- Safety -- Part 9: Requirements for pipelayers

ISO 20474-6:2008

Earth-moving machinery -- Safety -- Part 6: Requirements for dumpers

ISO 12402-5:2006

Personal flotation devices -- Part 5: Buoyancy aids (level 50) -- Safety requirements

ISO 1950:1974

Aircraft -- Identification of servicing maintenance ground handling and safety/hazard points

ISO 15534-3:2000

Ergonomic design for the safety of machinery -- Part 3: Anthropometric data

ISO 12543-5:1998

Glass in building -- Laminated glass and laminated safety glass -- Part 5: Dimensions and edge finishing

ISO 3265:1974

Continuous mechanical handling equipment for loose bulk materials -- Wagon tipplers handling rail-borne wagons (rotary side discharge and end discharge) -- Safety code

ISO 17398:2004

Safety colours and safety signs -- Classification performance and durability of safety signs

ISO 14620-3:2005

Space systems -- Safety requirements -- Part 3: Flight safety systems

ISO 20957-1:2005

Stationary training equipment -- Part 1: General safety requirements and test methods

ISO 1819:1977

Continuous mechanical handling equipment -- Safety code -- General rules

ISO 10381-3:2001

Soil quality -- Sampling -- Part 3: Guidance on safety

ISO 3864-4:2011

Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials

ISO 18906:2000

Imaging materials -- Photographic films -- Specifications for safety film

ISO 20345:2004

Personal protective equipment -- Safety footwear

ISO 20474-11:2008

Earth-moving machinery -- Safety -- Part 11: Requirements for earth and landfill compactors

ISO 16156:2004

Machine-tools safety -- Safety requirements for the design and construction of work holding chucks

ISO/IEC Guide 50:2002

Safety aspects -- Guidelines for child safety

ISO 14740:1998

Forest machinery -- Backpack power units for brush-cutters grass-trimmers pole-cutters and similar appliances -- Safety requirements and testing

IEC 60601-2-13:2003

Medical electrical equipment -- Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems

ISO 3864-2:2004

Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels

ISO 11933-4:2001

Components for containment enclosures -- Part 4: Ventilation and gas-cleaning systems such as filters traps safety and regulation valves control and protection devices

ISO 19472:2006

Machinery for forestry -- Winches -- Dimensions performance and safety

ISO 17249:2004

Safety footwear with resistance to chain saw cutting

ISO 11850:2003

Machinery for forestry -- Self-propelled machinery -- Safety requirements

ISO 7010:2003

Graphical symbols -- Safety colours and safety signs -- Safety signs used in workplaces and public areas

ISO 80601-2-61:2011

Medical electrical equipment -- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment

ISO 15027-1:2002

Immersion suits -- Part 1: Constant wear suits requirements including safety

ISO 10882-1:2001

Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 1: Sampling of airborne particles

ISO 3917:1999

Road vehicles -- Safety glazing materials -- Test methods for resistance to radiation high temperature humidity fire and simulated weathering

ISO/IEC Guide 63:1999

Guide to the development and inclusion of safety aspects in International Standards for medical devices

ISO 8098:2002

Cycles -- Safety requirements for bicycles for young children

ISO 14865:1998

Machinery for forestry -- Portable hand-held brush-cutters and grass-trimmers with backpack-mounted combustion-engine power source -- Safety requirements and testing

ISO 14122-4:2004

Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders

ISO 20474-12:2008

Earth-moving machinery -- Safety -- Part 12: Requirements for cable excavators

ISO 11540:1993

Caps for writing and marking instruments intended for use by children up to 14 years of age -- Safety requirements

ISO 29042-5:2010

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet

ISO 15534-1:2000

Ergonomic design for the safety of machinery -- Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery

ISO 15641:2001

Milling cutters for high speed machining -- Safety requirements

ISO/TR 15349-1:1998

Road vehicles -- Safety glazing materials -- VocabularyUnalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)

ISO 6469-3:2001

Electric road vehicles -- Safety specifications -- Part 3: Protection of persons against electric hazards

ISO/IEC Guide 51:1999

Safety aspects -- Guidelines for their inclusion in standards

ISO 14708-1:2000

Implants for surgery -- Active implantable medical devices -- Part 1: General requirements for safety marking and for information to be provided by the manufacturer

ISO 10882-2:2000

Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 2: Sampling of gases

ISO 15082:1999

Road vehicles -- Tests for rigid plastic safety glazing materials

ISO 13090-1:1998

Mechanical vibration and shock -- Guidance on safety aspects of tests and experiments with people -- Part 1: Exposure to whole-body mechanical vibration and repeated shock

ISO/TR 13387-7:1999

Fire safety engineering -- Part 7: Detection activation and suppression

ISO/TR 13387-2:1999

Fire safety engineering -- Part 2: Design fire scenarios and design fires

ISO 12643-4:2010

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 4: Converting equipment and systems

ISO/TR 13387-4:1999

Fire safety engineering -- Part 4: Initiation and development of fire and generation of fire effluents

ISO 11449:1994

Walk-behind powered rotary tillers -- Definitions safety requirements and test procedures

ISO/TR 13387-1:1999

Fire safety engineering -- Part 1: Application of fire performance concepts to design objectives

ISO/TR 13387-6:1999

Fire safety engineering -- Part 6: Structural response and fire spread beyond the enclosure of origin

ISO 29042-6:2010

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet

ISO/TR 12885:2008

Nanotechnologies -- Health and safety practices in occupational settings relevant to nanotechnologies

ISO/TR 13387-5:1999

Fire safety engineering -- Part 5: Movement of fire effluents

ISO 14738:2002

Safety of machinery -- Anthropometric requirements for the design of workstations at machinery

ISO 14122-2:2001

Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways

ISO/TR 13387-8:1999

Fire safety engineering -- Part 8: Life safety -- Occupant behaviour location and condition

ISO 15501-1:2001

Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 1: Safety requirements

ISO 12100:2010

Safety of machinery -- General principles for design -- Risk assessment and risk reduction

ISO 29042-7:2010

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 7: Test bench method for the measurement of the pollutant concentration parameter

ISO 11448:1997

Powered shredders and chippers -- Definitions safety requirements and test procedures

ISO 14122-3:2001

Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs stepladders and guard-rails

ISO 11684:1995

Tractors machinery for agriculture and forestry powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles

ISO/TR 13387-3:1999

Fire safety engineering -- Part 3: Assessment and verification of mathematical fire models

ISO 13200:1995

Cranes -- Safety signs and hazard pictorials -- General principles

ISO 8528-12:1997

Reciprocating internal combustion engine driven alternating current generating sets -- Part 12: Emergency power supply to safety services

ISO 12643-1:2009

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 1: General requirements

ISO 9221-1:1992

Furniture -- Children's high chairs -- Part 1: Safety requirements

ISO/TR 9172:1987

Continuous mechanical handling equipment -- Safety code for screw conveyors -- Examples of guards for trapping and shearing points

ISO 8853:1989

Safety harnesses for competition drivers -- Requirements and test methods

ISO 8792:1986

Wire rope slings -- Safety criteria and inspection procedures for use

ISO/TR 8435:1984

Continuous mechanical handling equipment -- Safety code for belt conveyors -- Examples for protection of pinch points on idlers

ISO 8456:1985

Storage equipment for loose bulk materials -- Safety code

ISO 8437:1989

Snowthrowers -- Safety requirements and test procedures

ISO 4210:1996

Cycles -- Safety requirements for bicycles

ISO/TR 5045:1979

Continuous mechanical handling equipment -- Safety code for belt conveyors -- Examples for guarding of nip points

ISO 23273-1:2006

Fuel cell road vehicles -- Safety specifications -- Part 1: Vehicle functional safety

ISO 5175:1987

Equipment used in gas welding cutting and allied processes -- Safety devices for fuel gases and oxygen or compressed air -- General specifications requirements and tests

ISO 11148-3:2010

Hand-held non-electric power tools -- Safety requirements -- Part 3: Drills and tappers

ISO 5388:1981

Stationary air compressors -- Safety rules and code of practice

ISO 5031:1977

Continuous mechanical handling equipment for loose bulk materials -- Couplings and hose components used in pneumatic handling -- Safety code

ISO/TR 5046:1977

Continuous mechanical handling equipment -- Safety code for conveyors and elevators with chain-elements -- Examples for guarding of nip points

ISO 3873:1977

Industrial safety helmets

ISO 12499:1999

Industrial fans -- Mechanical safety of fans -- Guarding

ISO 3538:1997

Road vehicles -- Safety glazing materials -- Test methods for optical properties

ISO 3691:1980

Powered industrial trucks -- Safety code

ISO 14400:2005

Road vehicles -- Wheels and rims -- Use general maintenance and safety requirements and out-of-service conditions

ISO 5149:1993

Mechanical refrigerating systems used for cooling and heating -- Safety requirements

ISO 15190:2003

Medical laboratories -- Requirements for safety

ISO 9098-2:1994

Bunk beds for domestic use -- Safety requirements and tests -- Part 2: Test methods

ISO 12543-1:1998

Glass in building -- Laminated glass and laminated safety glass -- Part 1: Definitions and description of component parts

ISO 11806:1997

Agricultural and forestry machinery -- Portable hand-held combustion engine driven brush cutters and grass trimmers -- Safety

ISO 11789:1999

Powered edgers with rigid cutting means -- Definitions safety requirements and test procedures

ISO 9098-1:1994

Bunk beds for domestic use -- Safety requirements and tests -- Part 1: Safety requirements

ISO 1709:1995

Nuclear energy -- Fissile materials -- Principles of criticality safety in storing handling and processing

ISO 5395:1990

Power lawn-mowers lawn tractors lawn and garden tractors professional mowers and lawn and garden tractors with mowing attachments -- Definitions safety requirements and test procedures

ISO 614:1989

Shipbuilding and marine structures -- Toughened safety glass panes for rectangular windows and side scuttles -- Punch method of non-destructive strength testing

ISO 10821:2005

Industrial sewing machines -- Safety requirements for sewing machines units and systems

ISO 4126-10:2010

Safety devices for protection against excessive pressure -- Part 10: Sizing of safety valves for gas/liquid two-phase flow

ISO/TR 19961:2010

Cranes -- Safety code on mobile cranes

ISO 23550:2011

Safety and control devices for gas burners and gas-burning appliances -- General requirements

ISO 22538-6:2010

Space systems -- Oxygen safety -- Part 6: Facility planning and implementation