Page Header

Petrochemicals - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the Petrochemicals processes, equipment, accessories, services and standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Petrochemicals Industry. This scheme provides the Petrochemicals components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 15590-1:2009

Petroleum and natural gas industries -- Induction bends fittings and flanges for pipeline transportation systems -- Part 1: Induction bends

ISO 10426-1:2009

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 1: Specification

ISO 15136-1:2009

Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps

ISO 29945:2009

Refrigerated non-petroleum-based liquefied gaseous fuels -- Dimethylether (DME) -- Method of manual sampling onshore terminals

ISO 28781:2010

Petroleum and natural gas industries -- Drilling and production equipment --Subsurface barrier valves and related equipment

ISO 3987:2010

Petroleum products -- Determination of sulfated ash in lubricating oils and additives

ISO 7404-2:2009

Methods for the petrographic analysis of coals -- Part 2: Methods of preparing coal samples

ISO 10423:2009

Petroleum and natural gas industries -- Drilling and production equipment -- Wellhead and christmas tree equipment

ISO 4926:2006

Road vehicles -- Hydraulic braking systems -- Non-petroleum-base reference fluids

ISO 13501:2005

Petroleum and natural gas industries -- Drilling fluids -- Processing systems evaluation

ISO 10239:2008

Small craft -- Liquefied petroleum gas (LPG) systems

ISO 14596:2007

Petroleum products -- Determination of sulfur content -- Wavelength-dispersive X-ray fluorescence spectrometry

ISO 28300:2008

Petroleum petrochemical and natural gas industries -- Venting of atmospheric and low-pressure storage tanks

ISO/TR 10400:2007

Petroleum and natural gas industries -- Equations and calculations for the properties of casing tubing drill pipe and line pipe used as casing or tubing

ISO 14310:2008

Petroleum and natural gas industries -- Downhole equipment -- Packers and bridge plugs

ISO 13623:2009

Petroleum and natural gas industries -- Pipeline transportation systems

ISO 11961:2008

Petroleum and natural gas industries -- Steel drill pipe

ISO 13500:2008

Petroleum and natural gas industries -- Drilling fluid materials -- Specifications and tests

ISO 3924:2010

Petroleum products -- Determination of boiling range distribution -- Gas chromatography method

ISO 10424-2:2007

Petroleum and natural gas industries -- Rotary drilling equipment -- Part 2: Threading and gauging of rotary shouldered thread connections

ISO 8789:2009

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -- Specification

ISO 19901-3:2010

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 3: Topsides structure

ISO 26422:2011

Petroleum and related products -- Determination of shear stability of lubricating oils containing polymers -- Method using a tapered roller bearing

ISO 17824:2009

Petroleum and natural gas industries -- Downhole equipment -- Sand screens

ISO 28460:2010

Petroleum and natural gas industries -- Installation and equipment for liquefied natural gas -- Ship-to-shore interface and port operations

ISO 7507-4:2010

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 4: Internal electro-optical distance-ranging method

ISO 10307-2:2009

Petroleum products -- Total sediment in residual fuel oils -- Part 2: Determination using standard procedures for ageing

ISO 3405:2011

Petroleum products -- Determination of distillation characteristics at atmospheric pressure

ISO/TS 27469:2010

Petroleum petrochemical and natural gas industries - Method of test for fire dampers

ISO 2137:2007

Petroleum products and lubricants -- Determination of cone penetration of lubricating greases and petrolatum

ISO/TR 13624-2:2009

Petroleum and natural gas industries -- Drilling and production equipment -- Part 2: Deepwater drilling riser methodologies operations and integrity technical report

ISO 14691:2008

Petroleum petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- General-purpose applications

ISO 14723:2009

Petroleum and natural gas industries -- Pipeline transportation systems -- Subsea pipeline valves

ISO/TR 29662:2009

Petroleum products and other liquids -- Guidance for flash point testing

ISO 10307-1:2009

Petroleum products -- Total sediment in residual fuel oils -- Part 1: Determination by hot filtration

ISO 16591:2010

Petroleum products -- Determination of sulfur content -- Oxidative microcoulometry method

ISO 15546:2007

Petroleum and natural gas industries -- Aluminium alloy drill pipe

ISO 4264:2007

Petroleum products -- Calculation of cetane index of middle-distillate fuels by the four-variable equation

ISO 21457:2010

Petroleum petrochemical and natural gas industries -- Materials selection and corrosion control for oil and gas production systems

ISO 4404-2:2010

Petroleum and related products -- Determination of the corrosion resistance of fire-resistant hydraulic fluids -- Part 2: Non-aqueous fluids

ISO/TS 11365:2011

Petroleum and related products -- Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids

ISO/TS 29001:2010

Petroleum petrochemical and natural gas industries -- Sector-specific quality management systems -- Requirements for product and service supply organizations

ISO 4263-3:2010

Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids using the TOST test -- Part 3: Anhydrous procedure for synthetic hydraulic fluids

ISO 4930:2006

Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)

ISO 25457:2008

Petroleum petrochemical and natural gas industries -- Flare details for general refinery and petrochemical service

ISO 10414-1:2008

Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 1: Water-based fluids

ISO 10426-6:2008

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 6: Methods for determining the static gel strength of cement formulations

ISO 23936-1:2009

Petroleum petrochemical and natural gas industries -- Non-metallic materials in contact with media related to oil and gas production -- Part 1: Thermoplastics

ISO 7404-5:2009

Methods for the petrographic analysis of coals -- Part 5: Method of determining microscopically the reflectance of vitrinite

ISO 13709:2009

Centrifugal pumps for petroleum petrochemical and natural gas industries

ISO 10416:2008

Petroleum and natural gas industries -- Drilling fluids -- Laboratory testing

ISO 7404-3:2009

Methods for the petrographic analysis of coals -- Part 3: Method of determining maceral group composition

ISO/TS 24817:2006

Petroleum petrochemical and natural gas industries -- Composite repairs for pipework -- Qualification and design installation testing and inspection

ISO 13628-5:2009

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 5: Subsea umbilicals

ISO 21809-5:2010

Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 5: External concrete coatings

ISO 22854:2008

Liquid petroleum products -- Determination of hydrocarbon types and oxygenates in automotive-motor gasoline -- Multidimensional gas chromatography method

ISO 10438-2:2007

Petroleum petrochemical and natural gas industries -- Lubrication shaft-sealing and control-oil systems and auxiliaries -- Part 2: Special-purpose oil systems

ISO 13503-5:2006

Petroleum and natural gas industries -- Completion fluids and materials -- Part 5: Procedures for measuring the long-term conductivity of proppants

ISO 14435:2005

Carbonaceous materials for the production of aluminium -- Petroleum coke -- Determination of trace metals by inductively coupled plasma atomic emission spectrometry

ISO 10407-2:2008

Petroleum and natural gas industries -- Rotary drilling equipment -- Part 2: Inspection and classification of used drill stem elements

ISO 10438-4:2007

Petroleum petrochemical and natural gas industries -- Lubrication shaft-sealing and control-oil systems and auxiliaries -- Part 4: Self-acting gas seal support systems

ISO 13357-2:2005

Petroleum products -- Determination of the filterability of lubricating oils -- Part 2: Procedure for dry oils

ISO 17078-4:2010

Petroleum and natural gas industries -- Drilling and production equipment -- Part 4: Practices for side-pocket mandrels and related equipment

ISO 6119:2006

Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

ISO 14313:2007

Petroleum and natural gas industries -- Pipeline transportation systems -- Pipeline valves

ISO 5163:2005

Petroleum products -- Determination of knock characteristics of motor and aviation fuels -- Motor method

ISO 6118:2006

Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)

ISO 10438-1:2007

Petroleum petrochemical and natural gas industries -- Lubrication shaft-sealing and control-oil systems and auxiliaries -- Part 1: General requirements

ISO 10438-3:2007

Petroleum petrochemical and natural gas industries -- Lubrication shaft-sealing and control-oil systems and auxiliaries -- Part 3: General-purpose oil systems

ISO 23251:2006

Petroleum petrochemical and natural gas industries -- Pressure-relieving and depressuring systems

ISO 13503-4:2006

Petroleum and natural gas industries -- Completion fluids and materials -- Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions

ISO 4928:2006

Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

ISO 5164:2005

Petroleum products -- Determination of knock characteristics of motor fuels -- Research method

ISO 15138:2007

Petroleum and natural gas industries -- Offshore production installations -- Heating ventilation and air-conditioning

ISO 20783-1:2011

Petroleum and related products -- Determination of emulsion stability of fire-resistant fluids -- Part 1: Fluids in category HFAE

ISO 20843:2011

Petroleum and related products -- Determination of pH of fire-resistant fluids within categories HFAE HFAS and HFC

ISO 20815:2008

Petroleum petrochemical and natural gas industries -- Production assurance and reliability management

ISO 21809-4:2009

Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 4: Polyethylene coatings (2-layer PE)

ISO 16070:2005

Petroleum and natural gas industries -- Downhole equipment -- Lock mandrels and landing nipples

ISO 13628-4:2010

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 4: Subsea wellhead and tree equipment

ISO 3183:2007

Petroleum and natural gas industries -- Steel pipe for pipeline transportation systems

ISO 4925:2005

Road vehicles -- Specification of non-petroleum-base brake fluids for hydraulic systems

ISO 16812:2007

Petroleum petrochemical and natural gas industries -- Shell-and-tube heat exchangers

ISO 13628-10:2005

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe

ISO 7507-2:2005

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 2: Optical-reference-line method

ISO 13626:2003

Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures

ISO 13737:2004

Petroleum products and lubricants -- Determination of low-temperature cone penetration of lubricating greases

ISO 6117:2005

Road vehicles -- Elastomeric boots for drum-type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)

ISO 13704:2007

Petroleum petrochemical and natural gas industries -- Calculation of heater-tube thickness in petroleum refineries

ISO 14224:2006

Petroleum petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment

ISO 10427-3:2003

Petroleum and natural gas industries -- Equipment for well cementing -- Part 3: Performance testing of cementing float equipment

ISO 15136-2:2006

Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems

ISO 7507-3:2006

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 3: Optical-triangulation method

ISO 13503-3:2005

Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines

ISO 4927:2005

Road vehicles -- Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

ISO 13628-11:2007

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 11: Flexible pipe systems for subsea and marine applications

ISO 19901-7:2005

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units

ISO 13705:2006

Petroleum petrochemical and natural gas industries -- Fired heaters for general refinery service

ISO 13678:2010

Petroleum and natural gas industries -- Evaluation and testing of thread compounds for use with casing tubing line pipe and drill stem elements

ISO 13628-2:2006

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 2: Unbonded flexible pipe systems for subsea and marine applications

ISO 13680:2010

Petroleum and natural gas industries -- Corrosion-resistant alloy seamless tubes for use as casing tubing and coupling stock -- Technical delivery conditions

ISO 4263-4:2006

Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 4: Procedure for industrial gear oils

ISO 15547-1:2005

Petroleum petrochemical and natural gas industries -- Plate-type heat exchangers -- Part 1: Plate-and-frame heat exchangers

ISO 21809-3:2008

Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 3: Field joint coatings

ISO 11223:2004

Petroleum and liquid petroleum products -- Direct static measurements -- Measurement of content of vertical storage tanks by hydrostatic tank gauging

ISO 14693:2003

Petroleum and natural gas industries -- Drilling and well-servicing equipment

ISO 10418:2003

Petroleum and natural gas industries -- Offshore production installations -- Analysis design installation and testing of basic surface process safety systems

ISO/TS 11366:2011

Petroleum and related products -- Guidance for in-servicing of lubricating oils for steam gas and combined-cycle turbines

ISO 13628-8:2002

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems

ISO 10425:2003

Steel wire ropes for the petroleum and natural gas industries -- Minimum requirements and terms of acceptance

ISO 13628-6:2006

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 6: Subsea production control systems

ISO 13710:2004

Petroleum petrochemical and natural gas industries -- Reciprocating positive displacement pumps

ISO 21809-2:2007

Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Fusion-bonded epoxy coatings

ISO 4259:2006

Petroleum products -- Determination and application of precision data in relation to methods of test

ISO 15547-2:2005

Petroleum petrochemical and natural gas industries -- Plate-type heat exchangers -- Part 2: Brazed aluminium plate-fin heat exchangers

ISO 10426-2:2003

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 2: Testing of well cements

ISO 7507-1:2003

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 1: Strapping method

ISO 10437:2003

Petroleum petrochemical and natural gas industries -- Steam turbines -- Special-purpose applications

ISO 13503-2:2006

Petroleum and natural gas industries -- Completion fluids and materials -- Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations

ISO 10426-5:2004

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure

ISO 20203:2005

Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of crystallite size of calcined petroleum coke by X-ray diffraction

ISO 21329:2004

Petroleum and natural gas industries -- Pipeline transportation systems -- Test procedures for mechanical connectors

ISO 10440-1:2007

Petroleum petrochemical and natural gas industries -- Rotary-type positive-displacement compressors -- Part 1: Process compressors

ISO 13628-1:2005

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations

ISO 15156-3:2009

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

ISO 2928:2003

Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2 5 MPa) -- Specification

ISO 10426-4:2004

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure

ISO 15156-2:2009

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 2: Cracking-resistant carbon and low-alloy steels and the use of cast irons

ISO 13533:2001

Petroleum and natural gas industries -- Drilling and production equipment -- Drill-through equipment

ISO 734-1:2006

Oilseed meals -- Determination of oil content -- Part 1: Extraction method with hexane (or light petroleum)

ISO 22991:2004

Gas cylinders -- Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Design and construction

ISO 4404-1:2001

Petroleum and related products -- Determination of the corrosion resistance of fire-resistant hydraulic fluids -- Part 1: Water-containing fluids

ISO 12917-1:2002

Petroleum and liquid petroleum products -- Calibration of horizontal cylindrical tanks -- Part 1: Manual methods

ISO 10432:2004

Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment

ISO 19906:2010

Petroleum and natural gas industries -- Arctic offshore structures

ISO 19438:2003

Diesel fuel and petrol filters for internal combustion engines -- Filtration efficiency using particle counting and contaminant retention capacity

ISO 20847:2004

Petroleum products -- Determination of sulfur content of automotive fuels -- Energy-dispersive X-ray fluorescence spectrometry

ISO 19901-1:2005

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 1: Metocean design and operating considerations

ISO 4263-1:2003

Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 1: Procedure for mineral oils

ISO 12917-2:2002

Petroleum and liquid petroleum products -- Calibration of horizontal cylindrical tanks -- Part 2: Internal electro-optical distance-ranging method

ISO 10442:2002

Petroleum chemical and gas service industries -- Packaged integrally geared centrifugal air compressors

ISO 20884:2004

Petroleum products -- Determination of sulfur content of automotive fuels -- Wavelength-dispersive X-ray fluorescence spectrometry

ISO 10426-3:2003

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 3: Testing of deepwater well cement formulations

ISO 11960:2004

Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells

ISO 17078-2:2007

Petroleum and natural gas industries -- Drilling and production equipment -- Part 2: Flow-control devices for side-pocket mandrels

ISO 19900:2002

Petroleum and natural gas industries -- General requirements for offshore structures

ISO 10464:2004

Gas cylinders -- Refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Periodic inspection and testing

ISO 19901-6:2009

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 6: Marine operations

ISO 17078-3:2009

Petroleum and natural gas industries -- Drilling and production equipment -- Part 3: Running tools pulling tools and kick-over tools and latches for side-pocket mandrels

ISO 14692-4:2002

Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication installation and operation

ISO 4269:2001

Petroleum and liquid petroleum products -- Tank calibration by liquid measurement -- Incremental method using volumetric meters

ISO 14692-2:2002

Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture

ISO 3838:2004

Crude petroleum and liquid or solid petroleum products -- Determination of density or relative density -- Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods

ISO 20783-2:2003

Petroleum and related products -- Determination of emulsion stability of fire-resistant fluids -- Part 2: Fluids in category HFB

ISO 20844:2004

Petroleum and related products -- Determination of the shear stability of polymer-containing oils using a diesel injector nozzle

ISO 15589-1:2003

Petroleum and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 1: On-land pipelines

ISO 4263-2:2003

Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 2: Procedure for category HFC hydraulic fluids

ISO 20846:2004

Petroleum products -- Determination of sulfur content of automotive fuels -- Ultraviolet fluorescence method

ISO 15589-2:2004

Petroleum and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 2: Offshore pipelines

ISO 14692-1:2002

Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary symbols applications and materials

ISO 20764:2003

Petroleum and related products -- Preparation of a test portion of high-boiling liquids for the determination of water content -- Nitrogen purge method

ISO 19901-4:2003

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 4: Geotechnical and foundation design considerations

ISO 5275:2003

Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species -- Doctor test

ISO 10441:2007

Petroleum petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- Special-purpose applications

ISO 15156-1:2009

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 1: General principles for selection of cracking-resistant materials

ISO 14692-3:2002

Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design

ISO 11563:2003

Crude petroleum and petroleum products -- Bulk cargo transfer -- Guidelines for achieving the fullness of pipelines

ISO 10691:2004

Gas cylinders -- Refillable welded steel cylinders for liquified petroleum gas (LPG) -- Procedures for checking before during and after filling

ISO 20763:2004

Petroleum and related products -- Determination of anti-wear properties of hydraulic fluids -- Vane pump method

ISO 8222:2002

Petroleum measurement systems -- Calibration -- Temperature corrections for use when calibrating volumetric proving tanks

ISO 4268:2000

Petroleum and liquid petroleum products -- Temperature measurements -- Manual methods

ISO 4512:2000

Petroleum and liquid petroleum products -- Equipment for measurement of liquid levels in storage tanks -- Manual methods

ISO 19901-2:2004

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria

ISO 21487:2006

Small craft -- Permanently installed petrol and diesel fuel tanks

ISO 19906:2010

Petroleum and natural gas industries -- Arctic offshore structures

ISO 20823:2003

Petroleum and related products -- Determination of the flammability characteristics of fluids in contact with hot surfaces -- Manifold ignition test

ISO 10434:2004

Bolted bonnet steel gate valves for the petroleum petrochemical and allied industries

ISO 13631:2002

Petroleum and natural gas industries -- Packaged reciprocating gas compressors

ISO 13535:2000

Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment

ISO 19901-5:2003

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 5: Weight control during engineering and construction

ISO 17078-1:2004

Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Side-pocket mandrels

ISO 10424-1:2004

Petroleum and natural gas industries -- Rotary drilling equipment -- Part 1: Rotary drill stem elements

ISO 10439:2002

Petroleum chemical and gas service industries -- Centrifugal compressors

ISO 20623:2003

Petroleum and related products -- Determination of the extreme-pressure and anti-wear properties of fluids -- Four ball method (European conditions)

ISO 15663-1:2000

Petroleum and natural gas industries -- Life cycle costing -- Part 1: Methodology

ISO 8754:2003

Petroleum products -- Determination of sulfur content -- Energy-dispersive X-ray fluorescence spectrometry

ISO 15649:2001

Petroleum and natural gas industries -- Piping

ISO 8216-99:2002

Petroleum products -- Fuels (class F) -- Classification -- Part 99: General

ISO 13775-2:2000

Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications

ISO 15663-3:2001

Petroleum and natural gas industries -- Life-cycle costing -- Part 3: Implementation guidelines

ISO 15584:2001

Small craft -- Inboard petrol engines -- Engine-mounted fuel and electrical components

ISO 2909:2002

Petroleum products -- Calculation of viscosity index from kinematic viscosity

ISO 15761:2002

Steel gate globe and check valves for sizes DN 100 and smaller for the petroleum and natural gas industries

ISO 15663-2:2001

Petroleum and natural gas industries -- Life-cycle costing -- Part 2: Guidance on application of methodology and calculation methods

ISO 3170:2004

Petroleum liquids -- Manual sampling

ISO 15911:2000

Petroleum products -- Estimation of net specific energy of aviation turbine fuels using hydrogen content data

ISO 19903:2006

Petroleum and natural gas industries -- Fixed concrete offshore structures

ISO 6246:1995

Petroleum products -- Gum content of light and middle distillate fuels -- Jet evaporation method

ISO 1998-99:2000

Petroleum industry -- Terminology -- Part 99: General and index

ISO 13624-1:2009

Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Design and operation of marine drilling riser equipment

ISO 19904-1:2006

Petroleum and natural gas industries -- Floating offshore structures -- Part 1: Monohulls semi-submersibles and spars

ISO 14597:1997

Petroleum products -- Determination of vanadium and nickel content -- Wavelength-dispersive X-ray fluorescence spectrometry

ISO 13879:1999

Petroleum and natural gas industries -- Content and drafting of a functional specification

ISO 10440-2:2001

Petroleum and natural gas industries -- Rotary-type positive-displacement compressors -- Part 2: Packaged air compressors (oil-free)

ISO 13740:1998

Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels

ISO 13847:2000

Petroleum and natural gas industries -- Pipeline transportation systems -- Welding of pipelines

ISO/TR 13881:2000

Petroleum and natural gas industries -- Classification and conformity assessment of products processes and services

ISO 4257:2001

Liquefied petroleum gases -- Method of sampling

ISO 10417:2004

Petroleum and natural gas industries -- Subsurface safety valve systems -- Design installation operation and redress

ISO 4256:1996

Liquefied petroleum gases -- Determination of gauge vapour pressure -- LPG method

ISO 13625:2002

Petroleum and natural gas industries -- Drilling and production equipment -- Marine drilling riser couplings

ISO 13628-3:2000

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems

ISO 13679:2002

Petroleum and natural gas industries -- Procedures for testing casing and tubing connections

ISO 13691:2001

Petroleum and natural gas industries -- High-speed special-purpose gear units

ISO 13880:1999

Petroleum and natural gas industries -- Content and drafting of a technical specification

ISO 13628-7:2005

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems

ISO 5165:1998

Petroleum products -- Determination of the ignition quality of diesel fuels -- Cetane engine method

ISO 6618:1997

Petroleum products and lubricants -- Determination of acid or base number -- Colour-indicator titration method

ISO 13702:1999

Petroleum and natural gas industries -- Control and mitigation of fires and explosions on offshore production installations -- Requirements and guidelines

ISO 13703:2000

Petroleum and natural gas industries -- Design and installation of piping systems on offshore production platforms

ISO 13757:1996

Liquefied petroleum gases -- Determination of oily residues -- High-temperature method

ISO 6251:1996

Liquefied petroleum gases -- Corrosiveness to copper -- Copper strip test

ISO 13707:2000

Petroleum and natural gas industries -- Reciprocating compressors

ISO 10405:2000

Petroleum and natural gas industries -- Care and use of casing and tubing

ISO 13758:1996

Liquefied petroleum gases -- Assessment of the dryness of propane -- Valve freeze method

ISO 13759:1996

Petroleum products -- Determination of alkyl nitrate in diesel fuels -- Spectrometric method

ISO 8819:1993

Liquefied petroleum gases -- Detection of hydrogen sulfide -- Lead acetate method

ISO 10370:1993

Petroleum products -- Determination of carbon residue -- Micro method

ISO 9770:1989

Crude petroleum and petroleum products -- Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1 074 kg/m3

ISO 10337:1997

Crude petroleum -- Determination of water -- Coulometric Karl Fischer titration method

ISO 10431:1993

Petroleum and natural gas industries -- Pumping units -- Specification

ISO 10478:1994

Petroleum products -- Determination of aluminium and silicon in fuel oils -- Inductively coupled plasma emission and atomic absorption spectroscopy methods

ISO 11007:1997

Petroleum products and lubricants -- Determination of rust-prevention characteristics of lubricating greases

ISO 6448:1985

Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material

ISO 10336:1997

Crude petroleum -- Determination of water -- Potentiometric Karl Fischer titration method

ISO 10407:1993

Petroleum and natural gas industries -- Drilling and production equipment -- Drill stem design and operating limits

ISO 10428:1993

Petroleum and natural gas industries -- Sucker rods (pony rods polished rods couplings and sub-couplings) -- Specification

ISO 6299:1998

Petroleum products -- Determination of dropping point of lubricating greases (wide temperature range)

ISO 7120:1987

Petroleum products and lubricants -- Petroleum oils and other fluids -- Determination of rust-preventing characteristics in the presence of water

ISO 7404-4:1988

Methods for the petrographic analysis of bituminous coal and anthracite -- Part 4: Method of determining microlithotype carbominerite and minerite composition

ISO 6120:1995

Road vehicles -- Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid

ISO 5661:1983

Petroleum products -- Hydrocarbon liquids -- Determination of refractive index

ISO 6244:1982

Petroleum waxes and petrolatums -- Determination of drop melting point

ISO 7308:1987

Road vehicles -- Petroleum-based brake-fluid for stored-energy hydraulic brakes

ISO 7404-1:1994

Methods for the petrographic analysis of bituminous coal and anthracite -- Part 1: Vocabulary

ISO 8216-1:2010

Petroleum products -- Fuels (class F) classification -- Part 1: Categories of marine fuels

ISO 6247:1998

Petroleum products -- Determination of foaming characteristics of lubricating oils

ISO 6551:1982

Petroleum liquids and gases -- Fidelity and security of dynamic measurement -- Cabled transmission of electric and/or electronic pulsed data

ISO 6619:1988

Petroleum products and lubricants -- Neutralization number -- Potentiometric titration method

ISO 8217:2010

Petroleum products -- Fuels (class F) -- Specifications of marine fuels

ISO 6617:1994

Petroleum-based lubricating oils -- Aging characteristics -- Determination of change in Conradson carbon residue after oxidation

ISO 2176:1995

Petroleum products -- Lubricating grease -- Determination of dropping point

ISO 7309:1985

Road vehicles -- Hydraulic braking systems -- ISO reference petroleum base fluid

ISO 3104:1994

Petroleum products -- Transparent and opaque liquids -- Determination of kinematic viscosity and calculation of dynamic viscosity

ISO 3977-5:2001

Gas turbines -- Procurement -- Part 5: Applications for petroleum and natural gas industries

ISO 3014:1993

Petroleum products -- Determination of the smoke point of kerosine

ISO 13706:2005

Petroleum petrochemical and natural gas industries -- Air-cooled heat exchangers

ISO 3171:1988

Petroleum liquids -- Automatic pipeline sampling

ISO 2207:1980

Petroleum waxes -- Determination of congealing point

ISO 3015:1992

Petroleum products -- Determination of cloud point

ISO 3007:1999

Petroleum products and crude petroleum -- Determination of vapour pressure -- Reid method

ISO 9403:2000

Crude petroleum -- Transfer accountability -- Guidelines for cargo inspection

ISO 11009:2000

Petroleum products and lubricants -- Determination of water washout characteristics of lubricating greases

ISO 10414-2:2002

Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 2: Oil-based fluids

ISO 17776:2000

Petroleum and natural gas industries -- Offshore production installations -- Guidelines on tools and techniques for hazard identification and risk assessment

ISO 16708:2006

Petroleum and natural gas industries -- Pipeline transportation systems -- Reliability-based limit state methods

ISO 17292:2004

Metal ball valves for petroleum petrochemical and allied industries

ISO 10427-1:2001

Petroleum and natural gas industries -- Equipment for well cementing -- Part 1: Casing bow-spring centralizers

ISO 6245:2001

Petroleum products -- Determination of ash

ISO 10427-2:2004

Petroleum and natural gas industries -- Equipment for well cementing -- Part 2: Centralizer placement and stop-collar testing

ISO 15544:2000

Petroleum and natural gas industries -- Offshore production installations -- Requirements and guidelines for emergency response

ISO 13628-9:2000

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems

ISO 6293-2:1998

Petroleum products -- Determination of saponification number -- Part 2: Potentiometric titration method

ISO 4266-2:2002

Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 2: Measurement of level in marine vessels

ISO 1998-6:2000

Petroleum industry -- Terminology -- Part 6: Measurement

ISO 1998-7:1998

Petroleum industry -- Terminology -- Part 7: Miscellaneous terms

ISO 15167:1999

Petroleum products -- Determination of particulate content of middle distillate fuels -- Laboratory filtration method

ISO 2977:1997

Petroleum products and hydrocarbon solvents -- Determination of aniline point and mixed aniline point

ISO 1998-4:1998

Petroleum industry -- Terminology -- Part 4: Refining

ISO 1998-3:1998

Petroleum industry -- Terminology -- Part 3: Exploration and production

ISO 7537:1997

Petroleum products -- Determination of acid number -- Semi-micro colour-indicator titration method

ISO 1998-2:1998

Petroleum industry -- Terminology -- Part 2: Properties and tests

ISO 11105:1997

Small craft -- Ventilation of petrol engine and/or petrol tank compartments

ISO 5024:1999

Petroleum liquids and liquefied petroleum gases -- Measurement -- Standard reference conditions

ISO 14935:1998

Petroleum and related products -- Determination of wick flame persistence of fire-resistant fluids

ISO 1998-1:1998

Petroleum industry -- Terminology -- Part 1: Raw materials and products

ISO 15169:2003

Petroleum and liquid petroleum products -- Determination of volume density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems

ISO 6250:1997

Petroleum products -- Determination of the water reaction of aviation fuels

ISO 19902:2007

Petroleum and natural gas industries -- Fixed steel offshore structures

ISO 4266-4:2002

Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 4: Measurement of temperature in atmospheric tanks

ISO 4266-6:2002

Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)

ISO 3675:1998

Crude petroleum and liquid petroleum products -- Laboratory determination of density -- Hydrometer method

ISO 4266-3:2002

Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)

ISO 1998-5:1998

Petroleum industry -- Terminology -- Part 5: Transport storage distribution

ISO 6297:1997

Petroleum products -- Aviation and distillate fuels -- Determination of electrical conductivity

ISO 2160:1998

Petroleum products -- Corrosiveness to copper -- Copper strip test

ISO 3735:1999

Crude petroleum and fuel oils -- Determination of sediment -- Extraction method

ISO 15029-1:1999

Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 1: Spray flame persistence -- Hollow-cone nozzle method

ISO 4266-5:2002

Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 5: Measurement of temperature in marine vessels

ISO 6296:2000

Petroleum products -- Determination of water -- Potentiometric Karl Fischer titration method

ISO 15597:2001

Petroleum and related products -- Determination of chlorine and bromine content -- Wavelength-dispersive X-ray fluorescence spectrometry

ISO 4262:1993

Petroleum products -- Determination of carbon residue -- Ramsbottom method

ISO 7507-5:2000

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 5: External electro-optical distance-ranging method

ISO 12185:1996

Crude petroleum and petroleum products -- Determination of density -- Oscillating U-tube method

ISO 13357-1:2002

Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water

ISO 3013:1997

Petroleum products -- Determination of the freezing point of aviation fuels

ISO 13592:1998

Small craft -- Backfire flame control for petrol engines

ISO 2049:1996

Petroleum products -- Determination of colour (ASTM scale)

ISO 6615:1993

Petroleum products -- Determination of carbon residue -- Conradson method

ISO 12205:1995

Petroleum products -- Determination of the oxidation stability of middle-distillate fuels

ISO 3771:1994

Petroleum products -- Determination of base number -- Perchloric acid potentiometric titration method

ISO 13534:2000

Petroleum and natural gas industries -- Drilling and production equipment -- Inspection maintenance repair and remanufacture of hoisting equipment

ISO 3012:1999

Petroleum products -- Determination of thiol (mercaptan) sulfur in light and middle distillate fuels -- Potentiometric method

ISO 4266-1:2002

Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 1: Measurement of level in atmospheric tanks

ISO 11759:1999

Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification

ISO 6293-1:1996

Petroleum products -- Determination of saponification number -- Part 1: Colour-indicator titration method

ISO 3016:1994

Petroleum products -- Determination of pour point

ISO 6249:1999

Petroleum products -- Determination of thermal oxidation stability of gas turbine fuels -- JFTOT method

ISO 15463:2003

Petroleum and natural gas industries -- Field inspection of new casing tubing and plain-end drill pipe

ISO 3830:1993

Petroleum products -- Determination of lead content of gasoline -- Iodine monochloride method

ISO 6614:1994

Petroleum products -- Determination of water separability of petroleum oils and synthetic fluids

ISO 7631:1985

Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 8691:1994

Petroleum products -- Low levels of vanadium in liquid fuels -- Determination by flameless atomic absorption spectrometry after ashing

ISO 8681:1986

Petroleum products and lubricants -- Method of classification -- Definition of classes

ISO 8216-2:1986

Petroleum products -- Fuels (class F) -- Classification -- Part 2: Categories of gas turbine fuels for industrial and marine applications

ISO 9120:1997

Petroleum and related products -- Determination of air-release properties of steam turbine and other oils -- Impinger method

ISO 9114:1997

Crude petroleum -- Determination of water content by hydride reaction -- Field method

ISO 8216-3:1987

Petroleum products -- Fuels (class F) -- Classification -- Part 3: Family L (Liquefied petroleum gases)

ISO 13739:2010

Petroleum products -- Procedures for transfer of bunkers to vessels

ISO 13503-1:2003

Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids

ISO 7624:1997

Petroleum products and lubricants -- Inhibited mineral turbine oils -- Determination of oxidation stability

ISO 7630:1985

Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 7632:1985

Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 8973:1997

Liquefied petroleum gases -- Calculation method for density and vapour pressure

ISO 7536:1994

Petroleum products -- Determination of oxidation stability of gasoline -- Induction period method

ISO 8697:1999

Crude petroleum and petroleum products -- Transfer accountability -- Assessment of on board quantity (OBQ) and quantity remaining on board (ROB)

ISO 7633:1985

Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 3993:1984

Liquefied petroleum gas and light hydrocarbons -- Determination of density or relative density -- Pressure hydrometer method

ISO 3527:2000

Oil of parsley fruits (Petroselinum sativum Hoffm.)

ISO 3733:1999

Petroleum products and bituminous materials -- Determination of water -- Distillation method

ISO 4267-2:1988

Petroleum and liquid petroleum products -- Calculation of oil quantities -- Part 2: Dynamic measurement

ISO 3996:1995

Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid

ISO 4929:1978

Road vehicles -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid

ISO 3734:1997

Petroleum products -- Determination of water and sediment in residual fuel oils -- Centrifuge method

ISO 3837:1993

Liquid petroleum products -- Determination of hydrocarbon types -- Fluorescent indicator adsorption method

ISO 4261:1993

Petroleum products -- Fuels (class F) -- Specifications of gas turbine fuels for industrial and marine applications

ISO 3871:2000

Road vehicles -- Labelling of containers for petroleum-based or non-petroleum-based brake fluid

ISO 4260:1987

Petroleum products and hydrocarbons -- Determination of sulfur content -- Wickbold combustion method

ISO 15590-2:2003

Petroleum and natural gas industries -- Induction bends fittings and flanges for pipeline transportation systems -- Part 2: Fittings

ISO 15590-3:2004

Petroleum and natural gas industries -- Induction bends fittings and flanges for pipeline transportation systems -- Part 3: Flanges

ISO 6808:1999

Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids -- Specification

ISO 9029:1990

Crude petroleum -- Determination of water -- Distillation method

ISO 9030:1990

Crude petroleum -- Determination of water and sediment -- Centrifuge method

ISO 12937:2000

Petroleum products -- Determination of water -- Coulometric Karl Fischer titration method

ISO 3839:1996

Petroleum products -- Determination of bromine number of distillates and aliphatic olefins -- Electrometric method

ISO 9200:1993

Crude petroleum and liquid petroleum products -- Volumetric metering of viscous hydrocarbons

ISO 91-2:1991

Petroleum measurement tables -- Part 2: Tables based on a reference temperature of 20 degrees C

ISO 91-1:1992

Petroleum measurement tables -- Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F

ISO 9162:1989

Petroleum products -- Fuels (class F) -- Liquefied petroleum gases -- Specifications