Page Header

Paints & Sealants - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the Paints & Sealants processes, equipment, accessories, services and standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Paints & Sealants Industry. This scheme provides the Paints & Sealants components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 2811-2:2011

Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method

ISO 16773-3:2009

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 3: Processing and analysis of data from dummy cells

ISO 12944-5:2007

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems

ISO 23811:2009

Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material and calculation of the theoretical spreading rate

ISO 20340:2009

Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures

ISO 28199-3:2009

Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 3: Visual assessment of sagging formation of bubbles pinholing and hiding power

ISO 3251:2008

Paints varnishes and plastics -- Determination of non-volatile-matter content

ISO 9117-2:2010

Paints and varnishes -- Drying tests -- Part 2: Pressure test for stackability

ISO 13885-1:2008

Binders for paints and varnishes -- Gel permeation chromatography (GPC) -- Part 1: Tetrahydrofuran (THF) as eluent

ISO 1513:2010

Paints and varnishes -- Examination and preparation of test samples

ISO 2811-3:2011

Paints and varnishes -- Determination of density -- Part 3: Oscillation method

ISO 28199-2:2009

Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 2: Colour stability process hiding power re-dissolving overspray absorption wetting surface texture and mottling

ISO 8501-1:2007

Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

ISO 28199-1:2009

Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 1: Relevant vocabulary and preparation of test panels

ISO 7142:2007

Binders for paints and varnishes -- Epoxy resins -- General methods of test

ISO 11909:2007

Binders for paints and varnishes -- Polyisocyanate resins -- General methods of test

ISO 7143:2007

Binders for paints and varnishes -- Methods of test for characterizing water-based binders

ISO 21227-4:2008

Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 4: Evaluation of filiform corrosion

ISO 10283:2007

Binders for paints and varnishes -- Determination of monomeric diisocyanates in isocyanate resins

ISO 2811-4:2011

Paints and varnishes -- Determination of density -- Part 4: Pressure cup method

ISO 10890:2010

Paints and varnishes -- Modelling of biocide release rate from antifouling paints by mass-balance calculation

ISO 8502-6:2006

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method

ISO 15181-2:2007

Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate

ISO 16773-4:2009

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 4: Examples of spectra of polymer-coated specimens

ISO 4625-1:2004

Binders for paints and varnishes -- Determination of softening point -- Part 1: Ring-and-ball method

ISO 15181-1:2007

Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides

ISO 15181-5:2008

Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract

ISO 1520:2006

Paints and varnishes -- Cupping test

ISO 8501-3:2006

Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds edges and other areas with surface imperfections

ISO 11890-1:2007

Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method

ISO 1522:2006

Paints and varnishes -- Pendulum damping test

ISO 2812-2:2007

Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method

ISO 17872:2007

Paints and varnishes -- Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

ISO 15181-3:2007

Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract

ISO 2808:2007

Paints and varnishes -- Determination of film thickness

ISO 10601:2007

Micaceous iron oxide pigments for paints -- Specifications and test methods

ISO 11997-1:2005

Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity

ISO 6504-3:2006

Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

ISO 2812-3:2007

Paints and varnishes -- Determination of resistance to liquids -- Part 3: Method using an absorbent medium

ISO 11998:2006

Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings

ISO 2812-4:2007

Paints and varnishes -- Determination of resistance to liquids -- Part 4: Spotting methods

ISO 11507:2007

Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV lamps and water

ISO 19334:2010

Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis

ISO 9514:2005

Paints and varnishes -- Determination of the pot life of multicomponent coating systems -- Preparation and conditioning of samples and guidelines for testing

ISO 150:2006

Raw refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test

ISO 8501-4:2006

Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions preparation grades and flash rust grades in connection with high-pressure water jetting

ISO 2812-1:2007

Paints and varnishes -- Determination of resistance to liquids -- Part 1: Immersion in liquids other than water

ISO 4618:2006

Paints and varnishes -- Terms and definitions

ISO 17132:2007

Paints and varnishes -- T-bend test

ISO 20566:2005

Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory car-wash

ISO 16276-2:2007

Corrosion protection of steel structures by protective paint systems -- Assessment of and acceptance criteria for the adhesion/cohesion (fracture strength) of a coating -- Part 2: Cross-cut testing and X-cut testing

ISO 16773-1:2007

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 1: Terms and definitions

ISO 8502-2:2005

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces

ISO 16276-1:2007

Corrosion protection of steel structures by protective paint systems -- Assessment of and acceptance criteria for the adhesion/cohesion (fracture strength) of a coating -- Part 1: Pull-off testing

ISO 6860:2006

Paints and varnishes -- Bend test (conical mandrel)

ISO 2812-5:2007

Paints and varnishes -- Determination of resistance to liquids -- Part 5: Temperature-gradient oven method

ISO 2409:2007

Paints and varnishes -- Cross-cut test

ISO 4628-6:2007

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method

ISO 11890-2:2006

Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method

ISO 16773-2:2007

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 2: Collection of data

ISO 20567-1:2005

Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 1: Multi-impact testing

ISO 20567-2:2005

Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 2: Single-impact test with a guided impact body

ISO 19840:2004

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Measurement of and acceptance criteria for the thickness of dry films on rough surfaces

ISO 2810:2004

Paints and varnishes -- Natural weathering of coatings -- Exposure and assessment

ISO 21227-3:2007

Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 3: Evaluation of delamination and corrosion around a scribe

ISO 4625-2:2004

Binders for paints and varnishes -- Determination of softening point -- Part 2: Cup-and-ball method

ISO 21227-2:2006

Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 2: Evaluation procedure for multi-impact stone-chipping test

ISO 21227-1:2003

Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 1: General guidance

ISO 15880:2000

Paints varnishes and binders -- Determination of MEQ value of water-based coating materials and binders

ISO 15710:2002

Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

ISO 15711:2003

Paints and varnishes -- Determination of resistance to cathodic disbonding of coatings exposed to sea water

ISO 4628-2:2003

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering

ISO 276:2002

Binders for paints and varnishes -- Linseed stand oil -- Requirements and methods of test

ISO 4623-2:2003

Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 2: Aluminium substrates

ISO 3248:1998

Paints and varnishes -- Determination of the effect of heat

ISO 15528:2000

Paints varnishes and raw materials for paints and varnishes -- Sampling

ISO 8503-5:2003

Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile

ISO 15741:2001

Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases

ISO 2114:2000

Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value

ISO 6744-2:1999

Binders for paints and varnishes -- Alkyd resins -- Part 2: Determination of phthalic anhydride content

ISO 11997-2:2000

Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light

ISO 8504-1:2000

Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles

ISO 8504-2:2000

Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning

ISO 6744-3:1999

Binders for paints and varnishes -- Alkyd resins -- Part 3: Determination of unsaponifiable matter content

ISO 6744-4:1999

Binders for paints and varnishes -- Alkyd resins -- Part 4: Determination of fatty acid content

ISO 4628-1:2003

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system

ISO 4628-3:2003

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting

ISO 9117-1:2009

Paints and varnishes -- Drying tests -- Part 1: Determination of through-dry state and through-dry time

ISO 4623-1:2000

Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates

ISO 277:2002

Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test

ISO 4628-4:2003

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking

ISO 15715:2003

Binders for paints and varnishes -- Determination of turbidity

ISO 4628-5:2003

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking

ISO 13803:2000

Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees

ISO 12944-8:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance

ISO 12137-2:1997

Paints and varnishes -- Determination of mar resistance -- Part 2: Method using a pointed stylus

ISO 14680-1:2000

Paints and varnishes -- Determination of pigment content -- Part 1: Centrifuge method

ISO 14446:1999

Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions

ISO 3262-12:2001

Extenders for paints -- Specifications and methods of test -- Part 12: Muscovite-type mica

ISO 8179-2:1995

Ductile iron pipes -- External zinc coating -- Part 2: Zinc rich paint with finishing layer

ISO 12944-2:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments

ISO 12944-7:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work

ISO 7784-2:1997

Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method

ISO 12944-3:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations

ISO 12944-4:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation

ISO 7784-3:2000

Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method

ISO 12944-6:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 6: Laboratory performance test methods

ISO 11127-1:1993

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling

ISO 11125-4:1993

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density

ISO 11126-8:1993

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand

ISO 11127-5:1993

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture

ISO 11124-4:1993

Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot

ISO 11125-5:1993

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure

ISO 11127-7:1993

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides

ISO 9117-3:2010

Paints and varnishes -- Drying tests -- Part 3: Surface-drying test using ballotini

ISO 11125-2:1993

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

ISO 11125-6:1993

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter

ISO 11126-6:1993

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag

ISO 11126-10:2000

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet

ISO 11125-1:1993

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling

ISO 11124-1:1993

Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification

ISO 11126-5:1993

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag

ISO 11127-4:1993

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test

ISO 11124-2:1993

Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit

ISO 11127-6:1993

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement

ISO 6217:1982

Shipbuilding -- Inland navigation -- Pilot craft -- Identification painting and inscriptions

ISO 11124-3:1993

Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit

ISO 6713:1984

Paints and varnishes -- Preparation of acid extracts from paints in liquid or powder form

ISO 6503:1984

Paints and varnishes -- Determination of total lead -- Flame atomic absorption spectrometric method

ISO 14680-3:2000

Paints and varnishes -- Determination of pigment content -- Part 3: Filtration method

ISO 11125-3:1993

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness

ISO 11126-1:1993

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification

ISO 11127-3:1993

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density

ISO 6504-1:1983

Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk method for white and light-coloured paints

ISO 6745:1990

Zinc phosphate pigments for paints -- Specifications and methods of test

ISO 7252:1984

Paints and varnishes -- Determination of total mercury -- Flameless atomic absorption spectrometric method

ISO 2068:1972

Barium chromate pigments for paints

ISO 3270:1984

Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing

ISO 2814:1973

Paints and varnishes -- Comparison of contrast ratio (hiding power) of paints of the same type and colour

ISO 3231:1993

Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide

ISO 11126-4:1993

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag

ISO 11126-7:1995

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide

ISO 3262-3:1998

Extenders for paints -- Specifications and methods of test -- Part 3: Blanc fixe

ISO 11126-9:1999

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite

ISO 3262-4:1998

Extenders for paints -- Specifications and methods of test -- Part 4: Whiting

ISO 3262-8:1999

Extenders for paints -- Specifications and methods of test -- Part 8: Natural clay

ISO 11127-2:1993

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

ISO 3262-11:2000

Extenders for paints -- Specifications and methods of test -- Part 11: Natural talc in lamellar form containing carbonates

ISO 11125-7:1993

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture

ISO 16805:2003

Binders for paints and varnishes -- Determination of glass transition temperature

ISO 3262-9:1997

Extenders for paints -- Specifications and methods of test -- Part 9: Calcined clay

ISO 1247:1974

Aluminium pigments for paints

ISO 3262-1:1997

Extenders for paints -- Specifications and methods of test -- Part 1: Introduction and general test methods

ISO 3262-10:2000

Extenders for paints -- Specifications and methods of test -- Part 10: Natural talc/chlorite in lamellar form

ISO 2813:1994

Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees 60 degrees and 85 degrees

ISO 3262-2:1998

Extenders for paints -- Specifications and methods of test -- Part 2: Barytes (natural barium sulfate)

ISO 1518:1992

Paints and varnishes -- Scratch test

ISO 2431:1993

Paints and varnishes -- Determination of flow time by use of flow cups

ISO 3262-7:1998

Extenders for paints -- Specifications and methods of test -- Part 7: Dolomite

ISO 2040:1972

Strontium chromate pigments for paints

ISO 11126-3:1993

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag

ISO 17895:2005

Paints and varnishes -- Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)

ISO 2884-2:2003

Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed

ISO 3262-17:2000

Extenders for paints -- Specifications and methods of test -- Part 17: Precipitated calcium silicate

ISO 3262-16:2000

Extenders for paints -- Specifications and methods of test -- Part 16: Aluminium hydroxides

ISO 4628-10:2003

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion

ISO 11341:2004

Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation

ISO 2815:2003

Paints and varnishes -- Buchholz indentation test

ISO 6270-2:2005

Paints and varnishes -- Determination of resistance to humidity -- Part 2: Procedure for exposing test specimens in condensation-water atmospheres

ISO 3262-22:2001

Extenders for paints -- Specifications and methods of test -- Part 22: Flux-calcined kieselguhr

ISO 3262-21:2000

Extenders for paints -- Specifications and methods of test -- Part 21: Silica sand (unground natural quartz)

ISO 1514:2004

Paints and varnishes -- Standard panels for testing

ISO 6270-1:1998

Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation

ISO 3262-20:2000

Extenders for paints -- Specifications and methods of test -- Part 20: Fumed silica

ISO 16862:2003

Paints and varnishes -- Evaluation of sag resistance

ISO 6272-1:2002

Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test large-area indenter

ISO 6272-2:2002

Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test small-area indenter

ISO 8502-11:2006

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 11: Field method for the turbidimetric determination of water-soluble sulfate

ISO 4628-7:2003

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 7: Assessment of degree of chalking by velvet method

ISO 4628-8:2005

Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 8: Assessment of degree of delamination and corrosion around a scribe

ISO 14680-2:2000

Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method

ISO/TR 15235:2001

Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination

ISO 8502-12:2003

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 12: Field method for the titrimetric determination of water-soluble ferrous ions

ISO 4624:2002

Paints and varnishes -- Pull-off test for adhesion

ISO 15181-4:2008

Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate

ISO 15184:1998

Paints and varnishes -- Determination of film hardness by pencil test

ISO 8502-8:2001

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 8: Field method for the refractometric determination of moisture

ISO 15234:1999

Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -- Determination of the steady-state concentration of formaldehyde in a small test chamber

ISO 1524:2000

Paints varnishes and printing inks -- Determination of fineness of grind

ISO 2884-1:1999

Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear

ISO 3262-18:2000

Extenders for paints -- Specifications and methods of test -- Part 18: Precipitated sodium aluminium silicate

ISO 11503:1995

Paints and varnishes -- Determination of resistance to humidity (intermittent condensation)

ISO 3262-6:1998

Extenders for paints -- Specifications and methods of test -- Part 6: Precipitated calcium carbonate

ISO 3262-15:2000

Extenders for paints -- Specifications and methods of test -- Part 15: Vitreous silica

ISO 8028:1999

Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification

ISO 591-1:2000

Titanium dioxide pigments for paints -- Part 1: Specifications and methods of test

ISO 11908:1996

Binders for paints and varnishes -- Amino resins -- General methods of test

ISO 8502-5:1998

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

ISO 7783-2:1999

Paints and varnishes -- Coating materials and coating systems for exterior masonry and concrete -- Part 2: Determination and classification of water-vapour transmission rate (permeability)

ISO 3262-19:2000

Extenders for paints -- Specifications and methods of test -- Part 19: Precipitated silica

ISO 3262-14:2000

Extenders for paints -- Specifications and methods of test -- Part 14: Cristobalite

ISO 11668:1997

Binders for paints and varnishes -- Chlorinated polymerization resins -- General methods of test

ISO 3262-5:1998

Extenders for paints -- Specifications and methods of test -- Part 5: Natural crystalline calcium carbonate

ISO 4619:1998

Driers for paints and varnishes

ISO 3262-13:1997

Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground)

ISO 12137-1:1997

Paints and varnishes -- Determination of mar resistance -- Part 1: Method using a curved stylus

ISO 3233:1998

Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating

ISO 8502-3:1992

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

ISO 8503-1:1988

Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

ISO 8504-3:1993

Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning

ISO 8502-4:1993

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application

ISO 8503-4:1988

Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Stylus instrument procedure

ISO 8623:1997

Tall-oil fatty acids for paints and varnishes -- Specifications and test methods

ISO 1519:2011

Paints and varnishes -- Bend test (cylindrical mandrel)

ISO 16053:2010

Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test

ISO 7784-1:1997

Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Rotating abrasive-paper-covered wheel method

ISO 8503-3:1988

Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Focusing microscope procedure

ISO 7724-2:1984

Paints and varnishes -- Colorimetry -- Part 2: Colour measurement

ISO 8503-2:1988

Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure

ISO 2811-1:2011

Paints and varnishes -- Determination of density -- Part 1: Pyknometer method

ISO 7783-1:1996

Paints and varnishes -- Determination of water-vapour transmission rate -- Part 1: Dish method for free films

ISO 7724-1:1984

Paints and varnishes -- Colorimetry -- Part 1: Principles

ISO 8501-2:1994

Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings

ISO 7724-3:1984

Paints and varnishes -- Colorimetry -- Part 3: Calculation of colour differences

ISO 3856-2:1984

Paints and varnishes -- Determination of "soluble" metal content -- Part 2: Determination of antimony content -- Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method

ISO 3856-5:1984

Paints and varnishes -- Determination of "soluble" metal content -- Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -- Diphenylcarbazide spectrophotometric method

ISO 4629:1996

Binders for paints and varnishes -- Determination of hydroxyl value -- Titrimetric method

ISO 3549:1995

Zinc dust pigments for paints -- Specifications and test methods

ISO 3668:1998

Paints and varnishes -- Visual comparison of the colour of paints

ISO 3856-1:1984

Paints and varnishes -- Determination of "soluble" metal content -- Part 1: Determination of lead content -- Flame atomic absorption spectrometric method and dithizone spectrophotometric method

ISO 3856-4:1984

Paints and varnishes -- Determination of "soluble" metal content -- Part 4: Determination of cadmium content -- Flame atomic absorption spectrometric method and polarographic method

ISO 3856-7:1984

Paints and varnishes -- Determination of "soluble" metal content -- Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints -- Flameless atomic absorption spectrometric method

ISO 3856-6:1984

Paints and varnishes -- Determination of "soluble" metal content -- Part 6: Determination of total chromium content of the liquid portion of the paint -- Flame atomic absorption spectrometric method

ISO 3678:1976

Paints and varnishes -- Print-free test

ISO 3681:1996

Binders for paints and varnishes -- Determination of saponification value -- Titrimetric method

ISO 3856-3:1984

Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method

ISO 12944-1:1998

Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction

ISO 510:1977

Red lead for paints

ISO 6744-1:1999

Binders for paints and varnishes -- Alkyd resins -- Part 1: General methods of test

ISO 8502-9:1998

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

ISO 473:1982

Lithopone pigments for paints -- Specifications and methods of test

ISO 788:1974

Ultramarine pigments for paints