Page Header

Mechanical & Fluids - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the Mechanical & Fluids processes, equipment, accessories, services and standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Mechanical & Fluids Industry. This scheme provides the Mechanical & Fluids components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 11790:2010

Copper lead zinc and nickel concentrates -- Guidelines for the inspection of mechanical sampling systems

ISO 2006-1:2009

Rubber latex synthetic -- Determination of mechanical stability -- Part 1: High-speed method

ISO 3506-1:2009

Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts screws and studs

ISO 3522:2007

Aluminium and aluminium alloys -- Castings -- Chemical composition and mechanical properties

ISO 16940:2008

Glass in building -- Glazing and airborne sound insulation -- Measurement of the mechanical impedance of laminated glass

ISO 22288:2006

Leather -- Physical and mechanical tests -- Determination of flex resistance by the vamp flex method

ISO 2419:2006

Leather -- Physical and mechanical tests -- Sample preparation and conditioning

ISO 17071:2006

Leather -- Physical and mechanical tests -- Determination of fogging characteristics

ISO 6721-4:2008

Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method

ISO 9073-5:2008

Textiles -- Test methods for nonwovens -- Part 5: Determination of resistance to mechanical penetration (ball burst procedure)

ISO 7919-3:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 3: Coupled industrial machines

ISO 6721-2:2008

Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method

ISO 2006-2:2009

Rubber latex synthetic -- Determination of mechanical stability -- Part 2: Moderate-speed method under load

ISO 3506-2:2009

Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts

ISO 14691:2008

Petroleum petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- General-purpose applications

ISO 1726-3:2010

Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 3: Requirements for semi-trailer contact area to fifth wheel

ISO 29805:2009

Thermal insulation products for building applications -- Determination of the mechanical properties of glass fibre meshes

ISO 10722:2007

Geosynthetics -- Index test procedure for the evaluation of mechanical damage under repeated loading -- Damage caused by granular material

ISO 14531-3:2010

Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)

ISO 3506-4:2009

Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 4: Tapping screws

ISO 463:2006

Geometrical Product Specifications (GPS) -- Dimensional measuring equipment -- Design and metrological characteristics of mechanical dial gauges

ISO 6721-12:2009

Plastics -- Determination of dynamic mechanical properties -- Part 12: Compressive vibration -- Non-resonance method

ISO 17074:2006

Leather -- Physical and mechanical tests -- Determination of resistance to horizontal spread of flame

ISO 16293-1:2008

Glass in building -- Basic soda lime silicate glass products -- Part 1: Definitions and general physical and mechanical properties

ISO/TR 25679:2005

Mechanical testing of metals -- Symbols and definitions in published standards

ISO 25620:2008

Laminate floor coverings -- Determination of long-side friction for mechanically assembled panels

ISO 10816-7:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 7: Rotodynamic pumps for industrial applications including measurements on rotating shafts

ISO 19499:2007

Mechanical vibration -- Balancing -- Guidance on the use and application of balancing standards

ISO/TS 128-71:2010

Technical product documentation (TPD) -- General principles of presentation -- Part 71: Simplified representation for mechanical engineering drawings

ISO 23910:2007

Leather -- Physical and mechanical tests -- Measurement of stitch tear resistance

ISO 18437-4:2008

Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 4: Dynamic stiffness method

ISO 16840-2:2007

Wheelchair seating -- Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity -- Seat cushions

ISO 8568:2007

Mechanical shock -- Testing machines -- Characteristics and performance

ISO 21398:2007

Hard coal and coke -- Guidance to the inspection of mechanical sampling systems

ISO 8375:2009

Timber structures -- Glued laminated timber -- Test methods for determination of physical and mechanical properties

ISO 17712:2010

Freight containers -- Mechanical seals

ISO 2320:2008

Prevailing torque type steel nuts -- Mechanical and performance properties

ISO 17076:2006

Leather -- Physical and mechanical tests -- Determination of abrasion resistance of automotive leather

ISO 17232:2006

Leather -- Physical and mechanical tests -- Determination of heat resistance of patent leather

ISO 22266-1:2009

Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW

ISO/TR 29381:2008

Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties

ISO 24334:2006

Laminate floor coverings -- Determination of locking strength for mechanically assembled panels

ISO 10816-4:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine sets with fluid-film bearings

ISO 21244:2008

Agricultural equipment -- Mechanical connections between towed and towing vehicles -- Implement hitch rings and attachment to tractor drawbars

ISO/TS 15694:2004

Mechanical vibration and shock -- Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system

ISO 15236-1:2005

Steel cord conveyor belts -- Part 1: Design dimensions and mechanical requirements for conveyor belts for general use

ISO 12189:2008

Implants for surgery -- Mechanical testing of implantable spinal devices -- Fatigue test method for spinal implant assemblies using an anterior support

ISO 4866:2010

Mechanical vibration and shock -- Vibration of fixed structures -- Guidelines for the measurement of vibrations and evaluation of their effects on structures

ISO 16750-3:2007

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads

ISO 22476-12:2009

Geotechnical investigation and testing -- Field testing -- Part 12: Mechanical cone penetration test (CPTM)

ISO 13791:2004

Thermal performance of buildings -- Calculation of internal temperatures of a room in summer without mechanical cooling -- General criteria and validation procedures

ISO 11608-4:2006

Pen-injectors for medical use -- Part 4: Requirements and test methods for electronic and electromechanical pen-injectors

ISO 15830-2:2005

Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 2: Mechanical subsystems

ISO 7919-4:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 4: Gas turbine sets with fluid-film bearings

ISO 13584-511:2006

Industrial automation systems and integration -- Parts library -- Part 511: Mechanical systems and components for general use -- Reference dictionary for fasteners

ISO 14839-3:2006

Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 3: Evaluation of stability margin

ISO 6690:2007

Milking machine installations -- Mechanical tests

ISO 20806:2009

Mechanical vibration -- Criteria and safeguards for the in-situ balancing of medium and large rotors

ISO 15835-1:2009

Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements

ISO/TR 22157-2:2004

Bamboo -- Determination of physical and mechanical properties -- Part 2: Laboratory manual

ISO 15835-2:2009

Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods

ISO/TR 15655:2003

Fire resistance -- Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design

ISO 20283-2:2008

Mechanical vibration -- Measurement of vibration on ships -- Part 2: Measurement of structural vibration

ISO 14963:2003

Mechanical vibration and shock -- Guidelines for dynamic tests and investigations on bridges and viaducts

ISO 898-1:2009

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts screws and studs with specified property classes -- Coarse thread and fine pitch thread

ISO 21415-2:2006

Wheat and wheat flour -- Gluten content -- Part 2: Determination of wet gluten by mechanical means

ISO 8009:2004

Mechanical contraceptives -- Reusable natural and silicone rubber contraceptive diaphragms -- Requirements and tests

ISO 9409-1:2004

Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates

ISO 9409-2:2002

Manipulating industrial robots -- Mechanical interfaces -- Part 2: Shafts

ISO 11359-3:2002

Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature

ISO 23718:2007

Metallic materials -- Mechanical testing -- Vocabulary

ISO 3140:2005

Oil of sweet orange (Citrus sinensis (L.) Osbeck) obtained by mechanical treatment

ISO 5263-3:2004

Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at > 85 degrees C

ISO 13792:2005

Thermal performance of buildings -- Calculation of internal temperatures of a room in summer without mechanical cooling -- Simplified methods

ISO 20283-3:2006

Mechanical vibration -- Measurement of vibration on ships -- Part 3: Pre-installation vibration measurement of shipboard equipment

ISO 5263-2:2004

Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C

ISO 18437-3:2005

Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 3: Cantilever shear beam method

ISO 2631-5:2004

Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 5: Method for evaluation of vibration containing multiple shocks

ISO 2017-2:2007

Mechanical vibration and shock -- Resilient mounting systems -- Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems

ISO 1120:2002

Conveyor belts -- Determination of strength of mechanical fastenings -- Static test method

ISO 21329:2004

Petroleum and natural gas industries -- Pipeline transportation systems -- Test procedures for mechanical connectors

ISO/TR 22335:2007

Surface chemical analysis -- Depth profiling -- Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer

ISO 35:2004

Natural rubber latex concentrate -- Determination of mechanical stability

ISO 2041:2009

Mechanical vibration shock and condition monitoring -- Vocabulary

ISO 5692-1:2004

Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 1: Dimensions for hitch rings of 50/30 mm cross section

ISO/TS 20825:2003

Road vehicles -- Drawbar couplings drawbar eyes fifth wheel kingpins hook couplings and toroidal eyes -- Wear limits for in-use mechanical couplings

ISO 18437-2:2005

Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 2: Resonance method

ISO 18431-4:2007

Mechanical vibration and shock -- Signal processing -- Part 4: Shock-response spectrum analysis

ISO 17874-2:2004

Remote-handling devices for radioactive materials -- Part 2: Mechanical master-slave manipulators

ISO/TS 10811-1:2000

Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 1: Measurement and evaluation

ISO 18431-2:2004

Mechanical vibration and shock -- Signal processing -- Part 2: Time domain windows for Fourier Transform analysis

ISO 21289:2008

Mechanical vibration and shock -- Parameters to be specified for the acquisition of vibration data

ISO 22498:2005

Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving

ISO 13264:2010

Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings

ISO 24347:2005

Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Dimensions of ball-type coupling device (80 mm)

ISO 18431-1:2005

Mechanical vibration and shock -- Signal processing -- Part 1: General introduction

ISO 22157-1:2004

Bamboo -- Determination of physical and mechanical properties -- Part 1: Requirements

ISO 10303-224:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 224: Application protocol: Mechanical product definition for process planning using machining features

ISO 11979-3:2006

Ophthalmic implants -- Intraocular lenses -- Part 3: Mechanical properties and test methods

ISO 1726-2:2007

Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers

ISO 18649:2004

Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges

ISO/TS 10303-304:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 304: Abstract test suite: Mechanical design using boundary representation

ISO 20643:2005

Mechanical vibration -- Hand-held and hand-guided machinery -- Principles for evaluation of vibration emission

ISO 32100:2010

Rubber- or plastics-coated fabrics -- Physical and mechanical tests -- Determination of flex resistance by the flexometer method

ISO 128-44:2001

Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings

ISO 11403-1:2001

Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties

ISO 5692-2:2002

Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 2: Coupling ring 40 with socket

ISO 20864:2004

Footwear -- Test methods for stiffeners and toepuffs -- Mechanical characteristics

ISO 1925:2001

Mechanical vibration -- Balancing -- Vocabulary

ISO 10441:2007

Petroleum petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- Special-purpose applications

ISO 14835-1:2005

Mechanical vibration and shock -- Cold provocation tests for the assessment of peripheral vascular function -- Part 1: Measurement and evaluation of finger skin temperature

ISO 14835-2:2005

Mechanical vibration and shock -- Cold provocation tests for the assessment of peripheral vascular function -- Part 2: Measurement and evaluation of finger systolic blood pressure

ISO 6489-4:2004

Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 4: Dimensions of piton-type coupling

ISO 10303-204:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 204: Application protocol: Mechanical design using boundary representation

ISO 14617-7:2002

Graphical symbols for diagrams -- Part 7: Basic mechanical components

ISO 6721-1:2001

Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles

ISO 128-34:2001

Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings

ISO/TS 10811-2:2000

Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 2: Classification

ISO 15837:2004

Ships and marine technology -- Gasketed mechanical couplings for use in piping systems -- Performance specification

ISO 6489-3:2004

Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 3: Tractor drawbar

ISO 2418:2002

Leather -- Chemical physical and mechanical and fastness tests -- Sampling location

ISO 15230:2007

Mechanical vibration and shock -- Coupling forces at the man--machine interface for hand-transmitted vibration

ISO 14621-2:2003

Space systems -- Electrical electronic and electromechanical (EEE) parts -- Part 2: Control programme requirements

ISO 8458-2:2002

Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire

ISO 15838:2003

Ships and marine technology -- Fittings for use with gasketed mechanical couplings used in piping applications -- Performance specification

ISO 6954:2000

Mechanical vibration -- Guidelines for the measurement reporting and evaluation of vibration with regard to habitability on passenger and merchant ships

ISO 128-24:1999

Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings

ISO 3809:2004

Oil of lime (cold pressed) Mexican type (Citrus aurantifolia (Christm.) Swingle) obtained by mechanical means

ISO 9345-2:2003

Optics and optical instruments -- Microscopes -- Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems

ISO 14839-2:2004

Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 2: Evaluation of vibration

ISO 14621-1:2003

Space systems -- Electrical electronic and electromechanical (EEE) parts -- Part 1: Parts management

ISO 3537:1999

Road vehicles -- Safety glazing materials -- Mechanical tests

ISO 2017-1:2005

Mechanical vibration and shock -- Resilient mounting systems -- Part 1: Technical information to be exchanged for the application of isolation systems

ISO 8458-3:2002

Steel wire for mechanical springs -- Part 3: Oil-hardened and tempered wire

ISO 8124-1:2009

Safety of toys -- Part 1: Safety aspects related to mechanical and physical properties

ISO 1726-1:2000

Road vehicles -- Mechanical coupling between tractors and semi-trailers -- Part 1: Interchangeability between tractors and semi-trailers for general cargo

ISO 5403:2002

Leather -- Physical and mechanical tests -- Determination of water resistance of flexible leather

ISO 13995:2000

Protective clothing -- Mechanical properties -- Test method for the determination of the resistance to puncture and dynamic tearing of materials

ISO 13996:1999

Protective clothing -- Mechanical properties -- Determination of resistance to puncture

ISO 4510-2:1996

Earth-moving machinery -- Service tools -- Part 2: Mechanical pullers and pushers

ISO 11359-2:1999

Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

ISO 10814:1996

Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance

ISO 3376:2002

Leather -- Physical and mechanical tests -- Determination of tensile strength and percentage extension

ISO 13997:1999

Protective clothing -- Mechanical properties -- Determination of resistance to cutting by sharp objects

ISO 2417:2002

Leather -- Physical and mechanical tests -- Determination of the static absorption of water

ISO 3377-1:2002

Leather -- Physical and mechanical tests -- Determination of tear load -- Part 1: Single edge tear

ISO 6721-7:1996

Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method

ISO 5348:1998

Mechanical vibration and shock -- Mechanical mounting of accelerometers

ISO 9996:1996

Mechanical vibration and shock -- Disturbance to human activity and performance -- Classification

ISO 10816-1:1995

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 1: General guidelines

ISO 6721-5:1996

Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method

ISO 6721-10:1999

Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

ISO 14589:2000

Blind rivets -- Mechanical testing

ISO 2631-2:2003

Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1 Hz to 80 Hz)

ISO 14236:2000

Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

ISO 6721-6:1996

Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method

ISO 14268:2002

Leather -- Physical and mechanical tests -- Determination of water vapour permeability

ISO 9345-1:1996

Optics and optical instruments -- Microscopes -- Imaging distances related to mechanical reference planes -- Part 1: Tube length 160 mm

ISO 10838-1:2000

Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm

ISO 10838-2:2000

Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm

ISO 10055:1996

Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components

ISO 10198:1994

Micrographics -- Rotary camera for 16 mm microfilm -- Mechanical and optical characteristics

ISO 10326-1:1992

Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 1: Basic requirements

ISO 9851:1990

Continuous mechanical handling equipment -- Overhead electrical monorail conveyors -- Definitions and safety rules

ISO 10815:1996

Mechanical vibration -- Measurement of vibration generated internally in railway tunnels by the passage of trains

ISO 10068:1998

Mechanical vibration and shock -- Free mechanical impedance of the human hand-arm system at the driving point

ISO/IEC 10859:1997

Information technology -- 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers

ISO 10726:1992

Portable chain saws -- Chain catcher -- Dimensions and mechanical strength

ISO 9688:1990

Mechanical vibration and shock -- Analytical methods of assessing shock resistance of mechanical systems -- Information exchange between suppliers and users of analyses

ISO 10666:1999

Drilling screws with tapping screw thread -- Mechanical and functional properties

ISO 8970:2010

Timber structures -- Testing of joints made with mechanical fasteners -- Requirements for wood density

ISO 6891:1983

Timber structures -- Joints made with mechanical fasteners -- General principles for the determination of strength and deformation characteristics

ISO 7119:1981

Continuous mechanical handling equipment for loose bulk materials -- Screw conveyors -- Design rules for drive power

ISO 6363-2:1993

Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 2: Mechanical properties

ISO 6361-2:1990

Wrought aluminium and aluminium alloy sheets strips and plates -- Part 2: Mechanical properties

ISO 6721-3:1994

Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method

ISO 6899:1984

Acceptance conditions of open front mechanical power presses -- Testing of the accuracy

ISO 7189:1983

Continuous mechanical handling equipment -- Apron conveyors -- Design rules

ISO 6475:1989

Implants for surgery -- Metal bone screws with asymmetrical thread and spherical under-surface -- Mechanical requirements and test methods

ISO 7190:1981

Continuous mechanical handling equipment -- Bucket elevators -- Classification

ISO 2937:1974

Plain end seamless steel tubes for mechanical application

ISO 2954:1975

Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity

ISO 6721-8:1997

Plastics -- Determination of dynamic mechanical properties -- Part 8: Longitudinal and shear vibration -- Wave-propagation method

ISO 5734:1986

Acceptance conditions of mechanical dividing heads for machine tools -- Testing of accuracy

ISO 6362-2:1990

Wrought aluminium and aluminium alloy extruded rods/bars tubes and profiles -- Part 2: Mechanical properties

ISO 6898:1984

Open front mechanical power presses -- Capacity ratings and dimensions

ISO 5699:1979

Agricultural machines implements and equipment -- Dimensions for mechanical loading with bulk goods

ISO 5805:1997

Mechanical vibration and shock -- Human exposure -- Vocabulary

ISO 3130:1975

Wood -- Determination of moisture content for physical and mechanical tests

ISO 1535:1975

Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Belts

ISO 1940-2:1997

Mechanical vibration -- Balance quality requirements of rigid rotors -- Part 2: Balance errors

ISO 2030:1990

Granulated cork -- Size analysis by mechanical sieving

ISO 2140:1975

Continuous mechanical handling equipment for loose bulk materials -- Apron conveyors

ISO 1992-8:1978

Commercial refrigerated cabinets -- Test methods -- Part 8: Test for accidental mechanical contact

ISO 2406:1974

Continuous mechanical handling equipment -- Mobile and portable conveyors -- Constructional specifications

ISO 1536:1975

Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Belt pulleys

ISO 1865:1977

Textile machinery and accessories -- Serrated bars for mechanical warp stop motions -- Designations of dimensions and dimensions of cross-section

ISO 2271:1989

Surface active agents -- Detergents -- Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure

ISO 2631-1:1997

Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 1: General requirements

ISO 1807:1975

Continuous mechanical handling equipment for loose bulk materials -- Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal trough

ISO 2326:1972

Continuous mechanical handling equipment for loose bulk materials -- Aeroslides

ISO 3284:1974

Continuous mechanical handling equipment for loose bulk materials -- Dimensions of bends for use in pneumatic handling

ISO 7919-5:2005

Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 17186:2002

Leather -- Physical and mechanical tests -- Determination of surface coating thickness

ISO 17229:2002

Leather -- Physical and mechanical tests -- Determination of water vapour absorption

ISO 3129:1975

Wood -- Sampling methods and general requirements for physical and mechanical tests

ISO 3265:1974

Continuous mechanical handling equipment for loose bulk materials -- Wagon tipplers handling rail-borne wagons (rotary side discharge and end discharge) -- Safety code

ISO 1537:1975

Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Idlers

ISO 1815:1975

Continuous mechanical handling equipment for loose bulk materials -- Vibrating feeders and conveyors with tubular trough

ISO 2109:1975

Continuous mechanical handling equipment -- Light duty belt conveyors for loose bulk materials

ISO 2702:1992

Heat-treated steel tapping screws -- Mechanical properties

ISO 3069:2000

End-suction centrifugal pumps -- Dimensions of cavities for mechanical seals and for soft packing

ISO 2139:1975

Continuous mechanical handling equipment for loose bulk materials -- Oscillating conveyors and shaking or reciprocating feeders with tubular trough

ISO 3131:1975

Wood -- Determination of density for physical and mechanical tests

ISO 1816:1975

Continuous mechanical handling equipment for loose bulk materials and unit loads -- Belt conveyors -- Basic characteristics of motorized driving pulleys

ISO 1819:1977

Continuous mechanical handling equipment -- Safety code -- General rules

ISO 12368:2001

Agricultural vehicles -- Mechanical hook-type connections on towing vehicles -- Test methods and requirements

ISO 3378:2002

Leather -- Physical and mechanical tests -- Determination of resistance to grain cracking and grain crack index

ISO 3597-4:2003

Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 4: Determination of apparent interlaminar shear strength

ISO 6489-2:2002

Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 2: Specifications for clevis coupling 40

ISO 12683:2004

Mechanically deposited coatings of zinc -- Specification and test methods

ISO 3597-2:2003

Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength

ISO 17231:2006

Leather -- Physical and mechanical tests -- Determination of water repellency of garment leather

ISO 16670:2003

Timber structures -- Joints made with mechanical fasteners -- Quasi-static reversed-cyclic test method

ISO 17236:2002

Leather -- Physical and mechanical tests -- Determination of extension set

ISO 17227:2002

Leather -- Physical and mechanical tests -- Determination of dry heat resistance of leather

ISO 13091-1:2001

Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 1: Methods of measurement at the fingertips

ISO 2589:2002

Leather -- Physical and mechanical tests -- Determination of thickness

ISO 16587:2004

Mechanical vibration and shock -- Performance parameters for condition monitoring of structures

ISO 5349-1:2001

Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration -- Part 1: General requirements

ISO 3597-1:2003

Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods

ISO 3597-3:2003

Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength

ISO 5402:2002

Leather -- Physical and mechanical tests -- Determination of flex resistance by flexometer method

ISO 2631-4:2001

Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

ISO 5982:2001

Mechanical vibration and shock -- Range of idealized values to characterize seated-body biodynamic response under vertical vibration

ISO 2307:2010

Fibre ropes -- Determination of certain physical and mechanical properties

ISO 11407:2004

Commercial road vehicles -- Mechanical coupling between towing vehicles with coupling mounted forward and below and centre-axle trailers -- Interchangeability

ISO 5404:2002

Leather -- Physical and mechanical tests -- Determination of the water resistance of heavy leathers

ISO 17235:2002

Leather -- Physical and mechanical tests -- Determination of softness

ISO 14837-1:2005

Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 1: General guidance

ISO 2420:2002

Leather -- Physical and mechanical tests -- Determination of apparent density

ISO 3377-2:2002

Leather -- Physical and mechanical tests -- Determination of tear load -- Part 2: Double edge tear

ISO 17230:2006

Leather -- Physical and mechanical tests -- Determination of water penetration pressure

ISO 10838-3:2001

Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm

ISO 11406:2001

Commercial road vehicles -- Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers -- Interchangeability

ISO 17233:2002

Leather -- Physical and mechanical tests -- Determination of cold crack temperature of surface coatings

ISO 3380:2002

Leather -- Physical and mechanical tests -- Determination of shrinkage temperature up to 100 degrees C

ISO 8458-1:2002

Steel wire for mechanical springs -- Part 1: General requirements

ISO 6930-1:2001

High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels

ISO 14839-1:2002

Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 1: Vocabulary

ISO 9022-3:1998

Optics and optical instruments -- Environmental test methods -- Part 3: Mechanical stress

ISO 10303-518:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 518: Application interpreted construct: Mechanical design shaded presentation

ISO 14964:2000

Mechanical vibration and shock -- Vibration of stationary structures -- Specific requirements for quality management in measurement and evaluation of vibration

ISO 10326-2:2001

Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 2: Application to railway vehicles

ISO 1940-1:2003

Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

ISO 5349-2:2001

Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration -- Part 2: Practical guidance for measurement at the workplace

ISO 4951-3:2001

High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels

ISO 669:2000

Resistance welding -- Resistance welding equipment -- Mechanical and electrical requirements

ISO 7475:2002

Mechanical vibration -- Balancing machines -- Enclosures and other protective measures for the measuring station

ISO 6721-9:1997

Plastics -- Determination of dynamic mechanical properties -- Part 9: Tensile vibration -- Sonic-pulse propagation method

ISO 13091-2:2003

Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 2: Analysis and interpretation of measurements at the fingertips

ISO 898-5:1998

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses

ISO 10303-517:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 517: Application interpreted construct: Mechanical design geometric presentation

ISO 11342:1998

Mechanical vibration -- Methods and criteria for the mechanical balancing of flexible rotors

ISO 9328-5:2004

Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels thermomechanically rolled

ISO 20019:2001

Agricultural vehicles -- Mechanical connections on towed vehicles -- Dimensions for hitch rings

ISO 13090-1:1998

Mechanical vibration and shock -- Guidance on safety aspects of tests and experiments with people -- Part 1: Exposure to whole-body mechanical vibration and repeated shock

ISO/IEC 11518-1:1995

Information technology -- High-Performance Parallel Interface -- Part 1: Mechanical electrical and signalling protocol specification (HIPPI-PH)

ISO 4593:1993

Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning

ISO/TR 12735-2:1996

Mechanical testing of metals -- Symbols used with their definitions -- Part 2: Recommendations for the development of symbols and definitions

ISO 19899:2010

Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test)

ISO 10816-2:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min 1 800 r/min 3 000 r/min and 3 600 r/min

ISO 13753:1998

Mechanical vibration and shock -- Hand-arm vibration -- Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system

ISO 6489-1:2001

Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 1: Dimensions of hitch-hooks

ISO/TR 15461:1997

Steel forgings -- Testing frequency sampling conditions and test methods for mechanical tests

ISO 9177-3:1994

Mechanical pencils -- Part 3: Black leads -- Bending strengths of HB leads

ISO 8569:1996

Mechanical vibration and shock -- Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings

ISO 11359-1:1999

Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles

ISO 5838-1:1995

Implants for surgery -- Skeletal pins and wires -- Part 1: Material and mechanical requirements

ISO 10303-203:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 203: Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies

ISO 8002:1986

Mechanical vibrations -- Land vehicles -- Method for reporting measured data

ISO 8063-1:1986

Information processing -- Data interchange on 6 30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi) -- Part 1: Mechanical physical and magnetic properties

ISO 8727:1997

Mechanical vibration and shock -- Human exposure -- Biodynamic coordinate systems

ISO/TR 9172:1987

Continuous mechanical handling equipment -- Safety code for screw conveyors -- Examples of guards for trapping and shearing points

ISO 7641-1:1983

Road vehicles -- Caravans and light trailers -- Calculation of the mechanical strength of the drawbar -- Part 1: Steel drawbars

ISO 9188:1993

Machine tools -- Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force -- Characteristics and dimensions

ISO 7626-1:1986

Vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers

ISO 7919-1:1996

Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 1: General guidelines

ISO 8579-2:1993

Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing

ISO 8839:1986

Mechanical properties of fasteners -- Bolts screws studs and nuts made of non-ferrous metals

ISO 8540:1993

Open front mechanical power presses -- Vocabulary

ISO 7919-2:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min 1 800 r/min 3 000 r/min and 3 600 r/min

ISO 7845:1985

Horizontal joints between load-bearing walls and concrete floors -- Laboratory mechanical tests -- Effect of vertical loading and of moments transmitted by the floors

ISO 7844:1985

Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels -- Laboratory mechanical tests -- Effect of tangential loading

ISO/TR 8435:1984

Continuous mechanical handling equipment -- Safety code for belt conveyors -- Examples for protection of pinch points on idlers

ISO 8720:1991

Passenger cars -- Specifications for mechanical jacks

ISO 8248:1985

Windows and door height windows -- Mechanical tests

ISO 7626-2:1990

Vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter

ISO 7822:1990

Textile glass reinforced plastics -- Determination of void content -- Loss on ignition mechanical disintegration and statistical counting methods

ISO 8528-9:1995

Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations

ISO 9189:1993

Machine tools -- Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force -- Characteristics and dimensions

ISO 8608:1995

Mechanical vibration -- Road surface profiles -- Reporting of measured data

ISO 8462-1:1986

Information processing -- Data interchange on 6 30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi) 39 cpmm (1 000 cpi) -- Part 1: Mechanical physical and magnetic properties

ISO 7626-5:1994

Vibration and shock -- Experimental determination of mechanical mobility -- Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

ISO/TR 5045:1979

Continuous mechanical handling equipment -- Safety code for belt conveyors -- Examples for guarding of nip points

ISO 6534:2007

Forestry machinery -- Portable chain-saw hand-guards -- Mechanical strength

ISO 26082:2007

Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather

ISO 3459:1976

Polyethylene (PE) pressure pipes -- Joints assembled with mechanical fittings -- Internal under-pressure test method and requirement

ISO/TR 5047:1982

Continuous mechanical handling equipment -- Chain conveyors with bearing devices or load carriers -- Examples of protection against injuries by load carriers

ISO 3569:1976

Continuous mechanical handling equipment -- Classification of unit loads

ISO 5051:1981

Continuous mechanical handling equipment -- Deep elevator bucket with flat rear wall -- Main dimensions

ISO 10816-3:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

ISO 5031:1977

Continuous mechanical handling equipment for loose bulk materials -- Couplings and hose components used in pneumatic handling -- Safety code

ISO/TR 5046:1977

Continuous mechanical handling equipment -- Safety code for conveyors and elevators with chain-elements -- Examples for guarding of nip points

ISO 3853:1994

Road vehicles -- Towing vehicle coupling device to tow caravans or light trailers -- Mechanical strength test

ISO 5048:1989

Continuous mechanical handling equipment -- Belt conveyors with carrying idlers -- Calculation of operating power and tensile forces

ISO 5187:1985

Welding and allied processes -- Assemblies made with soft solders and brazing filler metals -- Mechanical test methods

ISO 4739:1985

Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing

ISO 12499:1999

Industrial fans -- Mechanical safety of fans -- Guarding

ISO 4471:1982

Wood -- Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands

ISO 8821:1989

Mechanical vibration -- Balancing -- Shaft and fitment key convention

ISO 5050:1981

Continuous mechanical handling equipment -- Vertical bucket elevators with calibrated round steel link chains -- General characteristics

ISO 5308:1992

Solid fertilizers -- Method of checking the performance of mechanical devices for sampling of product moving in bulk

ISO 3719:1994

Mechanical vibration -- Symbols for balancing machines and associated instrumentation

ISO 4059:1978

Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements

ISO 3435:1977

Continuous mechanical handling equipment -- Classification and symbolization of bulk materials

ISO 5149:1993

Mechanical refrigerating systems used for cooling and heating -- Safety requirements

ISO 898-6:1994

Mechanical properties of fasteners -- Part 6: Nuts with specified proof load values -- Fine pitch thread

ISO 13909-5:2001

Hard coal and coke -- Mechanical sampling -- Part 5: Coke -- Sampling from moving streams

ISO 1049:1975

Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough

ISO 10816-6:1995

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 6: Reciprocating machines with power ratings above 100 kW

ISO 13909-3:2001

Hard coal and coke -- Mechanical sampling -- Part 3: Coal -- Sampling from stationary lots

ISO 377:1997

Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing

ISO 898-2:1992

Mechanical properties of fasteners -- Part 2: Nuts with specified proof load values -- Coarse thread

ISO 10816-5:2000

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 13909-2:2001

Hard coal and coke -- Mechanical sampling -- Part 2: Coal -- Sampling from moving streams

ISO 268:1980

Aircraft -- Mechanical and electromechanical indicators -- General requirements

ISO 9086-1:1987

Wood -- Methods of physical and mechanical testing -- Vocabulary -- Part 1: General concepts and macrostructure

ISO 13909-8:2001

Hard coal and coke -- Mechanical sampling -- Part 8: Methods of testing for bias

ISO 789-5:1983

Agricultural tractors -- Test procedures -- Part 5: Partial power PTO -- Non-mechanically transmitted power

ISO 2953:1999

Mechanical vibration -- Balancing machines -- Description and evaluation

ISO 556:1980

Coke (greater than 20 mm in size) -- Determination of mechanical strength

ISO 787-18:1983

General methods of test for pigments and extenders -- Part 18: Determination of residue on sieve -- Mechanical flushing procedure

IEC 796-2:1990

Microprocessor system bus -- 8-bit and 16-bit data (MULTIBUS I) -- Part 2: Mechanical and pin descriptions for the system bus configuration with edge connectors (direct)

ISO 1050:1975

Continuous mechanical handling equipment for loose bulk materials -- Screw conveyors

ISO 9177-2:1989

Mechanical pencils -- Part 2: Black leads -- Classification and dimensions

ISO 13909-7:2001

Hard coal and coke -- Mechanical sampling -- Part 7: Methods for determining the precision of sampling sample preparation and testing

IEC 796-3:1990

Microprocessor system BUS I 8-bit and 16-bit data (MULTIBUS I) -- Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors

ISO 10819:1996

Mechanical vibration and shock -- Hand-arm vibration -- Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand

ISO 13909-4:2001

Hard coal and coke -- Mechanical sampling -- Part 4: Coal -- Preparation of test samples

ISO 13909-1:2001

Hard coal and coke -- Mechanical sampling -- Part 1: General introduction

ISO 898-7:1992

Mechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

ISO 13909-6:2001

Hard coal and coke -- Mechanical sampling -- Part 6: Coke -- Preparation of test samples

ISO 9177-1:1989

Mechanical pencils -- Part 1: Classification dimensions performance requirements and testing

ISO 3506-3:2009

Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress