Page Header

Industrial Chemistry - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the Industrial Chemistry processes, equipment, accessories, services and standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Industrial Chemistry Industry. This scheme provides the Industrial Chemistry components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 10303-52:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 52: Integrated generic resource: Mesh-based topology

IEC 81346-2:2009

Industrial systems installations and equipment and industrial products -- Structuring principles and reference designations -- Part 2: Classification of objects and codes for classes

ISO 22915-14:2010

Industrial trucks -- Verification of stability -- Part 14: Rough-terrain variable-reach trucks

ISO 11699-1:2008

Non-destructive testing -- Industrial radiographic film -- Part 1: Classification of film systems for industrial radiography

ISO 24135-1:2006

Industrial trucks -- Specifications and test methods for operator restraint systems -- Part 1: Lap-type seat belts

ISO 22915-10:2008

Industrial trucks -- Verification of stability -- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices

ISO 13584-102:2006

Industrial automation systems and integration -- Parts library -- Part 102: View exchange protocol by ISO 10303 conforming specification

ISO 12241:2008

Thermal insulation for building equipment and industrial installations -- Calculation rules

ISO/IEC 24771:2009

Information technology -- Telecommunications and information exchange between systems -- MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment

ISO 13584-42:2010

Industrial automation systems and integration -- Parts library -- Part 42: Description methodology: Methodology for structuring parts families

ISO 10303-235:2009

Industrial automation systems and integration -- Product data representation and exchange -- Part 235: Application protocol: Engineering properties for product design and verification

ISO 7919-3:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 3: Coupled industrial machines

ISO 12924:2010

Lubricants industrial oils and related products (Class L) -- Family X (Greases) -- Specification

ISO 7121:2006

Steel ball valves for general-purpose industrial applications

ISO/TS 13584-35:2010

Industrial automation systems and integration -- Parts library -- Part 35: Implementation resources: Spreadsheet interface for parts library

ISO 28765:2008

Vitreous and porcelain enamels -- Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges

ISO 13348:2007

Industrial fans -- Tolerances methods of conversion and technical data presentation

ISO 8143:2010

Thermal insulation products for building equipment and industrial installations -- Calcium silicate products

ISO/TR 29944:2010

Powered industrial trucks and tractors -- Brake performance -- Determination of measurement procedures

ISO/TS 10303-5001:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 5001: Guidance on the usage of ISO 10303-214 for gear units

ISO 30023:2010

Textiles -- Qualification symbols for labelling workwear to be industrially laundered

ISO 10303-59:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 59: Integrated generic resource -- Quality of product shape data

ISO 5208:2008

Industrial valves -- Pressure testing of metallic valves

ISO 10816-7:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 7: Rotodynamic pumps for industrial applications including measurements on rotating shafts

ISO 15531-43:2006

Industrial automation systems and integration -- Industrial manufacturing management data -- Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange

ISO/TR 24857:2006

Synthetic industrial diamond grit products -- Single-particle compressive failure strength -- "DiaTest-SI" system

ISO 10303-522:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 522: Application interpreted construct: Machining features

ISO 15745-5:2007

Industrial automation systems and integration -- Open systems application integration framework -- Part 5: Reference description for HDLC-based control systems

ISO 22915-8:2008

Industrial trucks -- Verification of stability -- Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated

ISO 22915-20:2008

Industrial trucks -- Verification of stability -- Part 20: Additional stability test for trucks operating in the special condition of offset load offset by utilization

ISO 22915-7:2009

Industrial trucks -- Verification of stability -- Part 7: Bidirectional and multidirectional trucks

ISO 20242-1:2005

Industrial automation systems and integration -- Service interface for testing applications -- Part 1: Overview

ISO 22915-4:2009

Industrial trucks -- Verification of stability -- Part 4: Pallet stackers double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height

ISO 14649-11:2004

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 11: Process data for milling

ISO 22734-1:2008

Hydrogen generators using water electrolysis process -- Part 1: Industrial and commercial applications

ISO/TS 15926-4:2007

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 4: Initial reference data

ISO 22915-1:2008

Industrial trucks -- Verification of stability -- Part 1: General

ISO 3999:2004

Radiation protection -- Apparatus for industrial gamma radiography -- Specifications for performance design and tests

ISO 22915-2:2008

Industrial trucks -- Verification of stability -- Part 2: Counterbalanced trucks with mast

ISO 6292:2008

Powered industrial trucks and tractors -- Brake performance and component strength

ISO 10303-28:2007

Industrial automation systems and integration -- Product data representation and exchange -- Part 28: Implementation methods: XML representations of EXPRESS schemas and data using XML schemas

ISO 14649-10:2004

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 10: General process data

ISO 22915-3:2008

Industrial trucks -- Verification of stability -- Part 3: Reach and straddle trucks

ISO 10303-223:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts

ISO 3739-1:2007

Industrial tyres and rims -- Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims -- Designation dimensions and marking

ISO 14113:2007

Gas welding equipment -- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)

ISO 10303-41:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 41: Integrated generic resource: Fundamentals of product description and support

ISO 13584-501:2007

Industrial automation systems and integration -- Parts library -- Part 501: Reference dictionary for measuring instruments -- Registration procedure

ISO 23570-2:2005

Industrial automation systems and integration - Distributed installation in industrial applications -- Part 2: Hybrid communication bus

ISO 24254:2007

Lubricants industrial oils and related products (class L) -- Family E (internal combustion engine oils) -- Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)

ISO 10303-111:2007

Industrial automation systems and integration -- Product data representation and exchange -- Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes

ISO 16784-1:2006

Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems

ISO 10303-219:2007

Industrial automation systems and integration -- Product data representation and exchange -- Part 219: Application protocol: Dimensional inspection information exchange

ISO/IEC 24702:2006

Information technology -- Generic cabling -- Industrial premises

ISO 10303-112:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models

ISO 21849:2006

Aircraft and space -- Industrial data -- Product identification and traceability

ISO 10303-55:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 55: Integrated generic resource: Procedural and hybrid representation

ISO 15380:2011

Lubricants industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG HEPG HEES and HEPR

ISO 3739-3:2008

Industrial tyres and rims -- Part 3: Rims

ISO/TR 18792:2008

Lubrication of industrial gear drives

ISO 18435-1:2009

Industrial automation systems and integration -- Diagnostics capability assessment and maintenance applications integration -- Part 1: Overview and general requirements

ISO/IEC Guide 75:2006

Strategic principles for future IEC and ISO standardization in industrial automation

ISO 23570-1:2005

Industrial automation systems and integration -- Distributed installation in industrial applications -- Part 1: Sensors and actuators

ISO 13584-511:2006

Industrial automation systems and integration -- Parts library -- Part 511: Mechanical systems and components for general use -- Reference dictionary for fasteners

ISO 5801:2007

Industrial fans -- Performance testing using standardized airways

ISO 15758:2004

Hygrothermal performance of building equipment and industrial installations -- Calculation of water vapour diffusion -- Cold pipe insulation systems

ISO 4263-4:2006

Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 4: Procedure for industrial gear oils

ISO 23993:2008

Thermal insulation products for building equipment and industrial installations -- Determination of design thermal conductivity

ISO 10303-11:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 11: Description methods: The EXPRESS language reference manual

ISO 9506-1:2003

Industrial automation systems -- Manufacturing Message Specification -- Part 1: Service definition

ISO 9506-2:2003

Industrial automation systems -- Manufacturing Message Specification -- Part 2: Protocol specification

ISO 10303-240:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 240: Application protocol: Process plans for machined products

ISO 21281:2005

Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks -- Rules for the construction and layout of pedals

ISO 24134:2006

Industrial trucks -- Additional requirements for automated functions on trucks

ISO 3691-5:2009

Industrial trucks -- Safety requirements and verification -- Part 5: Pedestrian-propelled trucks

ISO 9409-1:2004

Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates

ISO 9409-2:2002

Manipulating industrial robots -- Mechanical interfaces -- Part 2: Shafts

ISO 20242-2:2010

Industrial automation systems and integration -- Service interface for testing applications -- Part 2: Resource management service interface

ISO 14649-12:2005

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 12: Process data for turning

ISO 14694:2003

Industrial fans -- Specifications for balance quality and vibration levels

ISO 13787:2003

Thermal insulation products for building equipment and industrial installations -- Determination of declared thermal conductivity

ISO 14649-121:2005

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 121: Tools for turning machines

ISO 14695:2003

Industrial fans -- Method of measurement of fan vibration

ISO 105-C12:2004

Textiles - Tests for colour fastness -- Part C12: Colour fastness to industrial laundering

ISO 10303-42:2003

Industrial automation systems and integration -- Product data representation and exchange -- Part 42: Integrated generic resource: Geometric and topological representation

ISO 10303-238:2007

Industrial automation systems and integration -- Product data representation and exchange -- Part 238: Application protocol: Application interpreted model for computerized numerical controllers

ISO 10303-523:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 523: Application interpreted construct: Curve swept solid

ISO 10303-109:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models

ISO 6743-5:2006

Lubricants industrial oils and related products (class L) -- Classification -- Part 5: Family T (Turbines)

ISO 18629-14:2006

Industrial automation systems and integration -- Process specification language -- Part 14: Resource theories

ISO 18629-42:2006

Industrial automation systems and integration -- Process specification language -- Part 42: Definitional extension: Temporal and state extensions

ISO 10303-215:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 215: Application protocol: Ship arrangement

ISO 16100-3:2005

Industrial automation systems and integration -- Manufacturing software capability profiling for interoperability -- Part 3: Interface services protocols and capability templates

ISO 18629-41:2006

Industrial automation systems and integration -- Process specification language -- Part 41: Definitional extension: Activity extensions

ISO 13584-25:2004

Industrial automation systems and integration -- Parts library -- Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content

ISO 16100-2:2003

Industrial automation systems and integration -- Manufacturing software capability profiling for interoperability -- Part 2: Profiling methodology

ISO 16100-4:2006

Industrial automation systems and integration -- Manufacturing software capability profiling for interoperability -- Part 4: Conformance test methods criteria and reports

ISO 10931:2005

Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Specifications for components and the system

ISO 10303-218:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 218: Application protocol: Ship structures

ISO 18629-13:2006

Industrial automation systems and integration -- Process specification language -- Part 13: Duration and ordering theories

ISO 5802:2001

Industrial fans -- Performance testing in situ

ISO 10303-108:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models

ISO 10050:2005

Lubricants industrial oils and related products (class L) -- Family T (Turbines) -- Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)

ISO 10218-1:2006

Robots for industrial environments -- Safety requirements -- Part 1: Robot

ISO 18629-12:2005

Industrial automation systems and integration -- Process specification language -- Part 12: Outer core

ISO 18629-44:2006

Industrial automation systems and integration -- Process specification language -- Part 44: Definitional extension: Resource extensions

ISO 10303-521:2003

Industrial automation systems and integration -- Product data representation and exchange -- Part 521: Application interpreted construct: Manifold subsurface

ISO 9393-1:2004

Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General

ISO 22093:2003

Industrial automation systems and integration -- Physical device control -- Dimensional Measuring Interface Standard (DMIS)

ISO 10303-224:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 224: Application protocol: Mechanical product definition for process planning using machining features

ISO 18629-43:2006

Industrial automation systems and integration -- Process specification language -- Part 43: Definitional extension: Activity ordering and duration extensions

ISO 18629-1:2004

Industrial automation systems and integration -- Process specification language -- Part 1: Overview and basic principles

ISO/TS 10303-304:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 304: Abstract test suite: Mechanical design using boundary representation

ISO 13584-24:2003

Industrial automation systems and integration -- Parts library -- Part 24: Logical resource: Logical model of supplier library

ISO 19378:2003

Lubricants industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications

ISO 10303-227:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 227: Application protocol: Plant spatial configuration

ISO 16100-1:2009

Industrial automation systems and integration -- Manufacturing software capability profiling for interoperability -- Part 1: Framework

ISO 13347-1:2004

Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 1: General overview

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO 23570-3:2009

Industrial automation systems and integration -- Distributed installation in industrial applications -- Part 3: Power distribution bus

ISO/TS 10303-325:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 325: Abstract test suite: Building elements using explicit shape representation

ISO/TS 18876-1:2003

Industrial automation systems and integration -- Integration of industrial data for exchange access and sharing -- Part 1: Architecture overview and description

ISO 15745-3:2003

Industrial automation systems and integration -- Open systems application integration framework -- Part 3: Reference description for IEC 61158-based control systems

ISO 15531-42:2005

Industrial automation systems and integration -- Industrial manufacturing management data -- Part 42: Time Model

ISO 15871:2000

Industrial trucks -- Specifications for indicator lights for container handling and grappler arm operations

ISO 14661:2000/Amd 1:2002

Data sheets for thermal turbines for industrial applications

ISO 10303-204:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 204: Application protocol: Mechanical design using boundary representation

ISO/TS 10303-28:2003

Industrial automation systems and integration -- Product data representation and exchange -- Part 28: Implementation methods: XML representations of EXPRESS schemas and data

ISO 15745-4:2003

Industrial automation systems and integration -- Open systems application integration framework -- Part 4: Reference description for Ethernet-based control systems

ISO 18629-11:2005

Industrial automation systems and integration -- Process specification language -- Part 11: PSL core

ISO 10303-21:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 21: Implementation methods: Clear text encoding of the exchange structure

ISO 4343:2000

Industrial automation systems -- Numerical control of machines -- NC processor output -- Post processor commands

ISO 10303-50:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 50: Integrated generic resource: Mathematical constructs

ISO/TS 18876-2:2003

Industrial automation systems and integration -- Integration of industrial data for exchange access and sharing -- Part 2: Integration and mapping methodology

ISO 14649-111:2010

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 111: Tools for milling machines

ISO 3592:2000

Industrial automation systems -- Numerical control of machines -- NC processor output -- File structure and language format

ISO 21787:2006

Industrial valves -- Globe valves of thermoplastics materials

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO 15531-1:2004

Industrial automation systems and integration -- Industrial manufacturing management data -- Part 1: General overview

ISO 13347-2:2004

Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 2: Reverberant room method

ISO 15870:2000

Powered industrial trucks -- Safety signs and hazard pictorials -- General principles

ISO 15848-1:2006

Industrial valves -- Measurement test and qualification procedures for fugitive emissions -- Part 1: Classification system and qualification procedures for type testing of valves

ISO/TS 10303-35:2003

Industrial automation systems and integration -- Product data representation and exchange -- Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations

ISO 15926-1:2004

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 1: Overview and fundamental principles

ISO 16784-2:2006

Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 15926-2:2003

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 2: Data model

ISO 13347-4:2004

Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 4: Sound intensity method

ISO 13347-3:2004

Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 3: Enveloping surface methods

ISO 15797:2002

Textiles -- Industrial washing and finishing procedures for testing of workwear

ISO 15704:2000

Industrial automation systems -- Requirements for enterprise-reference architectures and methodologies

ISO 9044:1999

Industrial woven wire cloth -- Technical requirements and tests

ISO 9946:1999

Manipulating industrial robots -- Presentation of characteristics

ISO 10303-520:1999

Industrial automation systems and integration -- Product data representation and exchange -- Part 520: Application interpreted construct: Associative draughting elements

ISO 13562-2:2001

Industrial variable-reach trucks -- Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above

ISO 10303-519:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 519: Application interpreted construct: Geometric tolerances

ISO 15745-1:2003

Industrial automation systems and integration -- Open systems application integration framework -- Part 1: Generic reference description

ISO 6743-13:2002

Lubricants industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)

ISO 10303-23:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 23: Implementation methods: C++ language binding to the standard data access interface

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 14661:2000

Thermal turbines for industrial applications (steam turbines gas expansion turbines) -- General requirements

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO/TR 18532:2009

Guidance on the application of statistical methods to quality and to industrial standardization

ISO 14446:1999

Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions

ISO 10472-6:1997

Safety requirements for industrial laundry machinery -- Part 6: Ironing and fusing presses

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 14315:1997

Industrial wire screens -- Technical requirements and testing

ISO 6743-4:1999

Lubricants industrial oils and related products (class L) -- Classification -- Part 4: Family H (Hydraulic systems)

ISO 14258:1998

Industrial automation systems -- Concepts and rules for enterprise models

ISO 14539:2000

Manipulating industrial robots -- Object handling with grasp-type grippers -- Vocabulary and presentation of characteristics

ISO/TR 10314-1:1990

Industrial automation -- Shop floor production -- Part 1: Reference model for standardization and a methodology for identification of requirements

ISO 6743-9:2003

Lubricants industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases)

ISO/TR 13593:1999

Enclosed gear drives for industrial applications

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 841:2001

Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature

ISO 10303-207:1999

Industrial automation systems and integration -- Product data representation and exchange -- Part 207: Application protocol: Sheet metal die planning and design

ISO 10303-22:1998

Industrial automation systems and integration -- Product data representation and exchange -- Part 22: Implementation methods: Standard data access interface

ISO 13584-101:2003

Industrial automation systems and integration -- Parts library -- Part 101: Geometrical view exchange protocol by parametric program

ISO 10303-216:2003

Industrial automation systems and integration -- Product data representation and exchange -- Part 216: Application protocol: Ship moulded forms

ISO 10303-24:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 24: Implementation methods: C language binding of standard data access interface

ISO 13584-1:2001

Industrial automation systems and integration -- Parts library -- Part 1: Overview and fundamental principles

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 12623:2011

Thermal insulating products for building equipment and industrial installations -- Determination of short-term water absorption by partial immersion of preformed pipe insulation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 13584-20:1998

Industrial automation systems and integration -- Parts library -- Part 20: Logical resource: Logical model of expressions

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10472-2:1997

Safety requirements for industrial laundry machinery -- Part 2: Washing machines and washer-extractors

ISO 10500:1991

Industrial tyres and rims -- Cylindrical and conical base rubber solid tyres (metric series) -- Designation dimensions and marking

ISO 10630:1994

Industrial plate screens -- Specifications and test methods

ISO 10472-1:1997

Safety requirements for industrial laundry machinery -- Part 1: Common requirements

ISO 20898:2008

Industrial trucks -- Electrical requirements

ISO 10303-11:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 11: Description methods: The EXPRESS language reference manual

ISO 10472-4:1997

Safety requirements for industrial laundry machinery -- Part 4: Air dryers

ISO 7109:1985

Ammonia solution for industrial use -- Determination of residue after evaporation at 105 degrees C -- Gravimetric method

ISO 9950:1995

Industrial quenching oils -- Determination of cooling characteristics -- Nickel-alloy probe test method

ISO/TR 10314-2:1991

Industrial automation -- Shop floor production -- Part 2: Application of the reference model for standardization and methodology

ISO 10472-3:1997

Safety requirements for industrial laundry machinery -- Part 3: Washing tunnel lines including component machines

ISO 10499-1:1991

Industrial tyres and rims -- Rubber solid tyres (metric series) for pneumatic tyre rims -- Part 1: Designation dimensions and marking

ISO 10472-5:1997

Safety requirements for industrial laundry machinery -- Part 5: Flatwork ironers feeders and folders

ISO/TR 10303-12:1997

Industrial automation systems and integration -- Product data representation and exchange -- Part 12: Description methods: The EXPRESS-I language reference manual

ISO 5938:1979

Cryolite natural and artificial and aluminium fluoride for industrial use -- Determination of sulphur content -- X-ray fluorescence spectrometric method

ISO 6374:1981

Cryolite natural and artificial and aluminium fluoride for industrial use -- Determination of phosphorus content -- Atomic absorption spectrometric method after extraction

ISO 6743-2:1981

Lubricants industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings bearings and associated clutches)

ISO 7108:1985

Ammonia solution for industrial use -- Determination of ammonia content -- Titrimetric method

ISO 16100-5:2009

Industrial automation systems and integration -- Manufacturing software capability profiling for interoperability -- Part 5: Methodology for profile matching using multiple capability class structures

ISO 5580:1985

Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements

ISO 6228:1980

Chemical products for industrial use -- General method for determination of traces of sulphur compounds as sulphate by reduction and titrimetry

ISO 6743-12:1989

Lubricants industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)

ISO 7059:1982

Caprolactam for industrial use -- Determination of absorbance at a wavelength of 290 nm

ISO 10303-49:1998

Industrial automation systems and integration -- Product data representation and exchange -- Part 49: Integrated generic resources: Process structure and properties

ISO 5993:1979

Sodium hydroxide for industrial use -- Determination of mercury content -- Flameless atomic absorption spectrometric method

ISO 6743-6:1990

Lubricants industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears)

ISO 10303-225:1999

Industrial automation systems and integration -- Product data representation and exchange -- Part 225: Application protocol: Building elements using explicit shape representation

ISO 6206:1979

Chemical products for industrial use -- Sampling -- Vocabulary

ISO 6743-7:1986

Lubricants industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking)

ISO 2096:1972

Glycerols for industrial use -- Methods of sampling

ISO 2481:1973

Sodium chloride for industrial use -- Determination of halogens expressed as chlorine -- Mercurimetric method

ISO 2483:1973

Sodium chloride for industrial use -- Determination of the loss of mass at 110 degrees C

ISO 3137:1974

Anhydrous hydrogen fluoride for industrial use -- Sampling

ISO 10303-34:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 34: Conformance testing methodology and framework: Abstract test methods for application protocol implementations

ISO 5789:1979

Fluorinated hydrocarbons for industrial use -- Determination of non-volatile residue

ISO 6743-11:1990

Lubricants industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools)

ISO 7105:1985

Liquefied anhydrous ammonia for industrial use -- Determination of water content -- Karl Fischer method

ISO 6743-10:1989

Lubricants industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous)

ISO 6743-8:1987

Lubricants industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion)

ISO 6743-14:1994

Lubricants industrial oils and related products (class L) -- Classification -- Part 14: Family U (Heat treatment)

ISO 5790:1979

Inorganic chemical products for industrial use -- General method for determination of chloride content -- Mercurimetric method

ISO 7106:1985

Liquefied anhydrous ammonia for industrial use -- Determination of oil content -- Gravimetric and infra-red spectrometric methods

ISO 6227:1982

Chemical products for industrial use -- General method for determination of chloride ions -- Potentiometric method

ISO 5576:1997

Non-destructive testing -- Industrial X-ray and gamma-ray radiology -- Vocabulary

ISO 6685:1982

Chemical products for industrial use -- General method for determination of iron content -- 1 10-Phenanthroline spectrophotometric method

ISO 7004:2002

Photography -- Industrial radiographic films -- Determination of ISO speed ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation

ISO 5930:1979

Cryolite natural and artificial and aluminium fluoride for industrial use -- Determination of phosphorus content -- Reduced molybdophosphate photometric method

ISO 6796:1981

Polyglycols for industrial use -- Determination of hydroxyl number -- Phthalic anhydride esterification method

ISO 7103:1982

Liquefied anhydrous ammonia for industrial use -- Sampling -- Taking a laboratory sample

ISO 1388-1:1981

Ethanol for industrial use -- Methods of test -- Part 1: General

ISO 3196:1975

Sodium hydroxide for industrial use -- Determination of carbonates content -- Titrimetric method

ISO 1388-3:1981

Ethanol for industrial use -- Methods of test -- Part 3: Estimation of content of carbonyl compounds present in small amounts -- Photometric method

ISO 1692:1976

Sodium and potassium silicates for industrial use -- Determination of total alkalinity -- Titrimetric method

ISO 2227:1972

Formaldehyde solutions for industrial use -- Determination of formaldehyde content

ISO 2460:1973

Sodium hydrogen carbonate for industrial use -- Determination of iron content -- 1 10- Phenanthroline photometric method

ISO 2831:1973

Sodium fluoride for industrial use -- Determination of water-insoluble matter

ISO 3139:1976

Aqueous hydrofluoric acid for industrial use -- Sampling and methods of test

ISO 3165:1976

Sampling of chemical products for industrial use -- Safety in sampling

ISO/TR 11065:1992

Industrial automation glossary

ISO 1690:1976

Sodium and potassium silicates for industrial use -- Determination of silica content -- Gravimetric method by insolubilization

ISO 2121:1972

Liquid chlorine for industrial use -- Determination of water content -- Gravimetric method

ISO 2462:1973

Sodium chlorate for industrial use -- Determination of moisture content -- Gravimetric method

ISO 2199:1972

Sodium hydrogen carbonate for industrial use -- Determination of sodium hydrogen carbonate content -- Titrimetric method

ISO 2480:1972

Sodium chloride for industrial use -- Determination of sulphate content -- Barium sulphate gravimetric method

ISO 2482:1973

Sodium chloride for industrial use -- Determination of calcium and magnesium contents -- EDTA complexometric methods

ISO 3199:1975

Sodium chlorate for industrial use -- Determination of chlorate content -- Dichromate titrimetric method

ISO 1388-4:1981

Ethanol for industrial use -- Methods of test -- Part 4: Estimation of content of carbonyl compounds present in moderate amounts -- Titrimetric method

ISO 1689:1976

Sodium and potassium silicates for industrial use -- Calculation of the ratio : silicon dioxide/sodium oxide or silicon dioxide/potassium oxide

ISO 1388-8:1981

Ethanol for industrial use -- Methods of test -- Part 8: Determination of methanol content (methanol contents between 0 10 and 1 50 % (V/V)) -- Visual colorimetric method

ISO 1388-9:1981

Ethanol for industrial use -- Methods of test -- Part 9: Determination of esters content -- Titrimetric method after saponification

ISO 1691:1976

Sodium and potassium silicates for industrial use -- Determination of carbonates content -- Gas-volumetric method

ISO 2120:1972

Liquid chlorine for industrial use -- Determination of the content of chlorine by volume in the vaporized product

ISO 2122:1972

Sodium and potassium silicates for industrial use -- Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water

ISO 2463:1973

Sodium chlorate for industrial use -- Determination of chloride content -- Mercurimetric method

ISO 2806:1994

Industrial automation systems -- Numerical control of machines -- Vocabulary

ISO 2997:1974

Phosphoric acid for industrial use -- Determination of sulphate content -- Method by reduction and titrimetry

ISO 1388-5:1981

Ethanol for industrial use -- Methods of test -- Part 5: Determination of aldehydes content -- Visual colorimetric method

ISO 1686:1976

Sodium and potassium silicates for industrial use -- Samples and methods of test -- General

ISO 1756:1975

Industrial trucks -- Dimensions of stillages -- Connection gauge

ISO 2023:1994

Rubber footwear -- Lined industrial vulcanized-rubber boots -- Specification

ISO 1388-7:1981

Ethanol for industrial use -- Methods of test -- Part 7: Determination of methanol content (methanol contents between 0 01 and 0 20 % (V/V)) -- Photometric method

ISO 2762:1973

Hydrochloric acid for industrial use -- Determination of soluble sulphates -- Turbidimetric method

ISO 10303-209:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 209: Application protocol: Composite and metallic structural analysis and related design

ISO 16136:2006

Industrial valves -- Butterfly valves of thermoplastics materials

ISO 2209:1973

Liquid halogenated hydrocarbons for industrial use -- Sampling

ISO 2832:1973

Sodium fluoride for industrial use -- Determination of moisture content

ISO 2992:1974

Ammonium sulphate for industrial use -- Determination of iron content -- 2 2'- Bipyridyl photometric method

ISO 2993:1974

Ammonium sulphate for industrial use -- Determination of free acidity -- Titrimetric method

ISO 3195:1975

Sodium hydroxide for industrial use -- Sampling -- Test Sample -- Preparation of the main solution for carrying out certain determinations

ISO 1385-1:1977

Phthalate esters for industrial use -- Methods of test -- Part 1: General

ISO 1388-11:1981

Ethanol for industrial use -- Methods of test -- Part 11: Test for detection of furfural

ISO 1552:1976

Liquid chlorine for industrial use -- Method of sampling (for determining only the volumetric chlorine content)

ISO 2466:1973

Potassium hydroxide for industrial use -- Sampling -- Test sample -- Preparation of the main solution for carrying out certain determinations

ISO 2479:1972

Sodium chloride for industrial use -- Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations

ISO 2833:1973

Sodium fluoride for industrial use -- Determination of fluorine content -- Modified Willard-Winter method

ISO 1388-12:1981

Ethanol for industrial use -- Methods of test -- Part 12: Determination of permanganate time

ISO 1388-10:1981

Ethanol for industrial use -- Methods of test -- Part 10: Estimation of hydrocarbons content -- Distillation method

ISO 1604:1989

Belt drives -- Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys

ISO 2197:1972

Sodium hydrogen carbonate for industrial use -- List of methods of test and preparation of the test sample

ISO 14649-1:2003

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 1: Overview and fundamental principles

ISO 2194:1991

Industrial screens -- Woven wire cloth perforated plate and electroformed sheet -- Designation and nominal sizes of openings

ISO 7382:1986

Ethylene for industrial use -- Sampling in the liquid and the gaseous phase

ISO 1388-2:1981

Ethanol for industrial use -- Methods of test -- Part 2: Detection of alkalinity or determination of acidity to phenolphthalein

ISO 2461:1973

Sodium chlorate for industrial use -- Determination of matter insoluble in water

ISO 1388-6:1981

Ethanol for industrial use -- Methods of test -- Part 6: Test for miscibility with water

ISO 15531-32:2005

Industrial automation systems and integration -- Industrial manufacturing management data: Resources usage management -- Part 32: Conceptual model for resources usage management data

ISO 10303-14:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 14: Description methods: The EXPRESS-X language reference manual

ISO 9398-2:2003

Specifications for industrial laundry machines -- Definitions and testing of capacity and consumption characteristics -- Part 2: Batch drying tumblers

ISO 6743-1:2002

Lubricants industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)

ISO 12624:2011

Thermal insulating products for building equipment and industrial installations -- Determination of trace quantities of water soluble chloride fluoride silicate sodium ions and pH

ISO 9398-4:2003

Specifications for industrial laundry machines -- Definitions and testing of capacity and consumption characteristics -- Part 4: Washer-extractors

ISO 15531-31:2004

Industrial automation systems and integration -- Industrial manufacturing management data -- Part 31: Resource information model

ISO 10303-43:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 43: Integrated generic resource: Representation structures

ISO 16135:2006

Industrial valves -- Ball valves of thermoplastics materials

ISO 16138:2006

Industrial valves -- Diaphragm valves of thermoplastics materials

ISO 9398-3:2003

Specifications for industrial laundry machines -- Definitions and testing of capacity and consumption characteristics -- Part 3: Washing tunnels

ISO 6055:2004

Industrial trucks -- Overhead guards -- Specification and testing

ISO/TS 10303-27:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 27: Implementation methods: Java TM programming language binding to the standard data access interface with Internet/Intranet extensions

ISO 15745-2:2003

Industrial automation systems and integration -- Open systems application integration framework -- Part 2: Reference description for ISO 11898-based control systems

ISO 6743-3:2003

Lubricants industrial oils and related products (class L) -- Classification -- Part 3: Family D (Compressors)

ISO/TR 10303-307:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 307: Abstract test suite: Sheet metal die planning and design

ISO 6743-99:2002

Lubricants industrial oils and related products (class L) -- Classification -- Part 99: General

ISO 16139:2006

Industrial valves -- Gate valves of thermoplastics materials

ISO 3601-5:2002

Fluid power systems -- O-rings -- Part 5: Suitability of elastomeric materials for industrial applications

ISO 10303-44:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 44: Integrated generic resource: Product structure configuration

ISO 10381-5:2005

Soil quality -- Sampling -- Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination

ISO/TR 13283:1998

Industrial automation -- Time-critical communications architectures -- User requirements and network management for time-critical communications systems

ISO 5655:2000

Photography -- Industrial radiographic films (roll and sheet) and metal intensifying screens -- Dimensions

ISO 15848-2:2006

Industrial valves -- Measurement test and qualification procedures for fugitive emissions -- Part 2: Production acceptance test of valves

ISO 10303-104:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 104: Integrated application resource: Finite element analysis

ISO 16137:2006

Industrial valves -- Check valves of thermoplastics materials

ISO 10303-41:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 41: Integrated generic resource: Fundamentals of product description and support

ISO 9398-1:2003

Specifications for industrial laundry machines -- Definitions and testing of capacity and consumption characteristics -- Part 1: Flatwork ironing machines

ISO/TS 10303-332:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 332: Abstract test suite: Technical data packaging core information and exchange

ISO 10303-514:1999

Industrial automation systems and integration -- Product data representation and exchange -- Part 514: Application interpreted construct: Advanced boundary representation

ISO 9787:1999

Manipulating industrial robots -- Coordinate systems and motion nomenclatures

ISO 10303-503:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 503: Application interpreted construct: Geometrically bounded 2D wireframe

ISO 10303-512:1999

Industrial automation systems and integration -- Product data representation and exchange -- Part 512: Application interpreted construct: Faceted boundary representation

ISO 10303-501:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 501: Application interpreted construct: Edge-based wireframe

ISO 10303-505:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 505: Application interpreted construct: Drawing structure and administration

ISO 10303-518:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 518: Application interpreted construct: Mechanical design shaded presentation

ISO 10303-515:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 515: Application interpreted construct: Constructive solid geometry

ISO 13281-2:2000

Industrial automation systems and integration -- Manufacturing Automation Programming Environment (MAPLE) -- Part 2: Services and interfaces

ISO 22915-21:2009

Industrial trucks -- Verification of stability -- Part 21: Order-picking trucks with operator position elevating above 1 200 mm

ISO 9982:1998

Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH PJ PK PL and PM profiles: dimensions

ISO 10303-509:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 509: Application interpreted construct: Manifold surface

ISO 13584-26:2000

Industrial automation systems and integration -- Parts library -- Part 26: Logical resource: Information supplier identification

ISO 10303-232:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 232: Application protocol: Technical data packaging core information and exchange

ISO 10303-504:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 504: Application interpreted construct: Draughting annotation

ISO 10303-506:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 506: Application interpreted construct: Draughting elements

ISO 10303-511:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 511: Application interpreted construct: Topologically bounded surface

ISO 12628:2011

Thermal insulating products for building equipment and industrial installations -- Determination of dimensions squareness and linearity of preformed pipe insulation

ISO 10303-502:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 502: Application interpreted construct: Shell-based wireframe

ISO 10303-508:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 508: Application interpreted construct: Non-manifold surface

ISO 10303-513:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 513: Application interpreted construct: Elementary boundary representation

ISO 12629:2011

Thermal insulating products for building equipment and industrial installations -- Determination of water vapour transmission properties of preformed pipe insulation

ISO 10303-517:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 517: Application interpreted construct: Mechanical design geometric presentation

ISO 10303-507:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 507: Application interpreted construct: Geometrically bounded surface

ISO 13584-31:1999

Industrial automation systems and integration -- Parts library -- Part 31: Implementation resources: Geometric programming interface

ISO 10303-510:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 510: Application interpreted construct: Geometrically bounded wireframe

ISO 10303-105:1996

Industrial automation systems and integration -- Product data representation and exchange -- Part 105: Integrated application resource: Kinematics

ISO 10303-41:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 41: Integrated generic resources: Fundamentals of product description and support

ISO 10303-201:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 201: Application protocol: Explicit draughting

ISO 10303-44:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 44: Integrated generic resources: Product structure configuration

ISO 10303-32:1998

Industrial automation systems and integration -- Product data representation and exchange -- Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients

ISO 10303-202:1996

Industrial automation systems and integration -- Product data representation and exchange -- Part 202: Application protocol: Associative draughting

ISO 5057:1993

Industrial trucks -- Inspection and repair of fork arms in service on fork-lift trucks

ISO 10303-47:1997

Industrial automation systems and integration -- Product data representation and exchange -- Part 47: Integrated generic resource: Shape variation tolerances

ISO 13350:1999

Industrial fans -- Performance testing of jet fans

ISO 10303-46:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 46: Integrated generic resources: Visual presentation

ISO 11593:1996

Manipulating industrial robots -- Automatic end effector exchange systems -- Vocabulary and presentation of characteristics

ISO 10303-42:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 42: Integrated generic resources: Geometric and topological representation

ISO/TR 13309:1995

Manipulating industrial robots -- Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accordance with ISO 9283

ISO 1044:1993

Industrial trucks -- Lead-acid traction batteries for electric trucks -- Preferred voltages

ISO 10303-43:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 43: Integrated generic resources: Representation structures

ISO 10303-1:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 1: Overview and fundamental principles

ISO 15493:2003

Plastics piping systems for industrial applications -- Acrylonitrile-butadiene-styrene (ABS) unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) -- Specifications for components and the system -- Metric series

ISO/TR 14510:1997

Textiles -- Industrial laundering procedures for textile rental and industrial laundering

ISO 10303-31:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 31: Conformance testing methodology and framework: General concepts

ISO 13281:1997

Industrial automation systems -- Manufacturing Automation Programming Environment (MAPLE) -- Functional architecture

ISO 9283:1998

Manipulating industrial robots -- Performance criteria and related test methods

ISO 15537:2004

Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

ISO 10303-203:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 203: Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies

ISO 10303-101:1994

Industrial automation systems and integration -- Product data representation and exchange -- Part 101: Integrated application resources: Draughting

ISO 7805-1:1984

Industrial plate screens -- Part 1: Thickness of 3 mm and above

ISO 9045:1990

Industrial screens and screening -- Vocabulary

ISO 8297:1994

Acoustics -- Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment -- Engineering method

ISO 8216-2:1986

Petroleum products -- Fuels (class F) -- Classification -- Part 2: Categories of gas turbine fuels for industrial and marine applications

ISO 15494:2003

Plastics piping systems for industrial applications -- Polybutene (PB) polyethylene (PE) and polypropylene (PP) -- Specifications for components and the system -- Metric series

ISO 7806:1983

Industrial plate screens -- Codification for designating perforations

ISO 9085:2002

Calculation of load capacity of spur and helical gears -- Application for industrial gears

ISO 3393:1976

Cryolite natural and artificial and aluminium fluoride for industrial use -- Determination of moisture content -- Gravimetric method

ISO 13584-32:2010

Industrial automation systems and integration -- Parts library -- Part 32: Implementation resources: OntoML: Product ontology markup language

ISO 8112:1984

Caprolactam for industrial use -- Determination of colour of 50 % aqueous caprolactam solution expressed in Hazen units (platinum-cobalt scale) -- Spectrometric method

ISO 8174:1986

Ethylene and propylene for industrial use -- Determination of acetone acetonitrile propan-2-ol and methanol -- Gas chromatographic method

ISO 7805-2:1987

Industrial plate screens -- Part 2: Thickness below 3 mm

ISO 8213:1986

Chemical products for industrial use -- Sampling techniques -- Solid chemical products in the form of particles varying from powders to coarse lumps

ISO 8563:1987

Propylene and butadiene for industrial use -- Sampling in the liquid phase

ISO 8661:1988

Caprolactam for industrial use -- Determination of volatile bases content -- Titrimetric method after distillation

IEC 81346-1:2009

Industrial systems installations and equipment and industrial products -- Structuring principles and reference designations -- Part 1: Basic rules

ISO 8373:1994

Manipulating industrial robots -- Vocabulary

ISO 3360:1976

Phosphoric acid and sodium phosphates for industrial use (including foodstuffs) -- Determination of fluorine content -- Alizarin complexone and lanthanum nitrate photometric method

ISO 5444:1978

Sodium fluorosilicate for industrial use -- Determination of loss in mass at 105 degrees C

ISO 13562-1:2000

Industrial variable-reach trucks -- Part 1: Stability tests

ISO 11158:2009

Lubricants industrial oils and related products (class L) -- Family H (hydraulic systems) -- Specifications for categories HH HL HM HV and HG

ISO 4280:1977

Cryolite natural and artificial and aluminium fluoride for industrial use -- Determination of sulphate content -- Barium sulphate gravimetric method

ISO 4285:1977

Phosphoric acid for industrial use -- Guide to sampling techniques

ISO 4782:1987

Metal wire for industrial wire screens and woven wire cloth

ISO 5053:1987

Powered industrial trucks -- Terminology

ISO 5209:1977

General purpose industrial valves -- Marking

ISO 3332:1975

Ammonium sulphate for industrial use -- Determination of ammoniacal nitrogen content -- Titrimetric method after distillation

ISO 3423:1975

Sulphuric acid and oleums for industrial use -- Determination of sulphur dioxide content -- Iodometric method

ISO 10816-3:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

ISO 3426:1975

Sulphur for industrial use -- Determination of loss in mass at 80 degrees C

ISO 4783-1:1989

Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities

ISO 4783-3:1981

Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens

ISO 5280:1979

Xylene for industrial use -- Specification

ISO 15531-44:2010

Industrial automation systems and integration -- Industrial manufacturing management data -- Part 44: Information modelling for shop floor data acquisition

ISO 3363:1976

Fluorochlorinated hydrocarbons for industrial use -- Determination of acidity -- Titrimetric method

ISO 3705:1976

Sulphur for industrial use -- Determination of arsenic content -- Silver diethyldithiocarbamate photometric method

ISO 4643:1992

Moulded plastics footwear -- Lined or unlined poly(vinyl chloride) boots for general industrial use -- Specification

ISO 5272:1979

Toluene for industrial use -- Specifications

ISO 3739-2:1992

Industrial tyres and rims -- Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims -- Load ratings

ISO 3873:1977

Industrial safety helmets

ISO 3428:1976

Sodium fluoride for industrial use -- Preparation and storage of test samples

ISO 3706:1976

Phosphoric acid for industrial use (including foodstuffs) -- Determination of total phosphorus (V) oxide content -- Quinoline phosphomolybdate gravimetric method

ISO 12499:1999

Industrial fans -- Mechanical safety of fans -- Guarding

ISO 3511-4:1985

Industrial process measurement control functions and instrumentation -- Symbolic representation -- Part 4: Basic symbols for process computer interface and shared display/control functions

ISO 4261:1993

Petroleum products -- Fuels (class F) -- Specifications of gas turbine fuels for industrial and marine applications

ISO 5211:2001

Industrial valves -- Part-turn actuator attachments

ISO 3425:1975

Sulphur for industrial use -- Determination of ash at 850-900 degrees C and of residue at 200 degrees C

ISO 3448:1992

Industrial liquid lubricants -- ISO viscosity classification

ISO 3699:1976

Anhydrous hydrogen fluoride for industrial use -- Determination of water content -- Karl Fischer method

ISO 3691:1980

Powered industrial trucks -- Safety code

ISO 4281:1977

Sodium hexafluorosilicate for industrial use -- Determination of free acidity and total hexafluorosilicate content -- Titrimetric method

ISO 5373:1981

Condensed phosphates for industrial use (including foodstuffs) -- Determination of calcium content -- Flame atomic absorption spectrometric method

ISO 5423:1992

Moulded plastics footwear -- Lined or unlined polyurethane boots for general industrial use -- Specification

ISO 5440:1978

Sodium hexafluorosilicate for industrial use -- Determination of phosphate content -- Molybdovanadate spectrophotometric method

ISO 3707:1976

Phosphoric acid for industrial use (including foodstuffs) -- Determination of calcium content -- Flame atomic absorption method

ISO 5210:1991

Industrial valves -- Multi-turn valve actuator attachments

ISO 3357:1975

Sodium tripolyphosphate and sodium pyrophosphate for industrial use -- Determination of total phosphorus(V) oxide content -- Quinoline phosphomolybdate gravimetric method

ISO 3704:1976

Sulphur for industrial use -- Determination of acidity -- Titrimetric method

ISO 4783-2:1989

Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 2: Preferred combinations for woven wire cloth

ISO 11699-2:1998

Non-destructive testing -- Industrial radiographic films -- Part 2: Control of film processing by means of reference values

ISO/TS 12928:1999

Lubricants industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications

ISO 756-1:1981

Propan-2-ol for industrial use -- Methods of test -- Part 1: General

ISO 13738:2000

Lubricants industrial oils and related products (class L) -- Family E (Internal combustion engine oils) -- Specifications for two-stroke-cycle gasoline engine oils (categories EGB EGC and EGD)

ISO 9393-2:2005

Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements

ISO 3287:1999

Powered industrial trucks -- Symbols for operator controls and other displays

ISO 758:1976

Liquid chemical products for industrial use -- Determination of density at 20 degrees C

ISO 8068:2006

Lubricants industrial oils and related products (class L) -- Family T (Turbines) -- Specification for lubricating oils for turbines

ISO/TS 12927:1999

Lubricants industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications

ISO 746:1976

Sodium carbonate for industrial use -- Determination of matter insoluble in water at 50 degrees C

ISO 12925-1:1996

Lubricants industrial oils and related products (class L) -- Family C (Gears) -- Part 1: Specifications for lubricants for enclosed gear systems

ISO 910:1977

Sulphuric acid and oleum for industrial use -- Determination of total acidity and calculation of free sulphur trioxide content of oleum -- Titrimetric method

ISO 904:1976

Hydrochloric acid for industrial use -- Determination of total acidity -- Titrimetric method

ISO 10499-2:1998

Industrial tyres and rims -- Rubber solid tyres (metric series) for pneumatic tyre rims -- Part 2: Load ratings

ISO 12922:1999

Lubricants industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HFAE HFAS HFB HFC HFDR and HFDU

ISO 265-1:1988

Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U)

ISO 739:1976

Sodium carbonate for industrial use -- Preparation and storage of test samples

ISO 981:1973

Sodium hydroxide for industrial use -- Determination of chloride content -- Mercurimetric method

ISO 740:1976

Sodium carbonate for industrial use -- Determination of total soluble alkalinity -- Titrimetric method

ISO 759:1981

Volatile organic liquids for industrial use -- Determination of dry residue after evaporation on water bath -- General method

ISO 979:1974

Sodium hydroxide for industrial use -- Method of assay

ISO 918:1983

Volatile organic liquids for industrial use -- Determination of distillation characteristics

ISO 6743-15:2007

Lubricants industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)

ISO 10821:2005

Industrial sewing machines -- Safety requirements for sewing machines units and systems