Page Header

Fibre & Polymer - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the Fibre & Polymer processes, equipment, accessories, services and standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Fibre & Polymer Industry. This scheme provides the Fibre & Polymer components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO 9125:2009

Fibre-cement slates and fittings -- Product specification and test methods

ISO 10350-2:2011

Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics

ISO 2076:2010

Textiles -- Man-made fibres -- Generic names

ISO 27769-2:2009

Wood-based panels -- Wet-process fibreboard -- Part 2: Requirements

ISO/IEC 14165-331:2007

Information technology -- Fibre Channel -- Part 331: Virtual Interface (FC-VI)

ISO/IEC TR 14165-117:2007

Information technology -- Fibre Channel -- Part 117: Methodologies for jitter and signal quality (MJSQ)

ISO 25762:2009

Plastics -- Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites

ISO 1888:2006

Textile glass -- Staple fibres or filaments -- Determination of average diameter

ISO/TS 27687:2008

Nanotechnologies -- Terminology and definitions for nano-objects -- Nanoparticle nanofibre and nanoplate

ISO 10352:2010

Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of mass per unit area

ISO 1833-24:2010

Textiles -- Quantitative chemical analysis -- Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)

ISO 26243:2007

Cards for staple fibres spinning -- Vocabulary and principles of construction

ISO 28239:2008

Textile machinery -- Opener and cleaner for staple fibres preparation -- Vocabulary and principles of construction

ISO 10547:2009

Polyester fibre ropes -- Double braid construction

ISO 10554:2009

Polyamide fibre ropes -- Double braid construction

ISO 10556:2009

Fibre ropes of polyester/polyolefin dual fibres

ISO 27769-1:2009

Wood-based panels -- Wet-process fibreboard -- Part 1: Classifications

ISO 29805:2009

Thermal insulation products for building applications -- Determination of the mechanical properties of glass fibre meshes

ISO 10325:2009

Fibre ropes -- High modulus polyethylene -- 8-strand braided ropes 12-strand braided ropes and covered ropes

ISO 10406-1:2008

Fibre-reinforced polymer (FRP) reinforcement of concrete -- Test methods -- Part 1: FRP bars and grids

ISO 10406-2:2008

Fibre-reinforced polymer (FRP) reinforcement of concrete -- Test methods -- Part 2: FRP sheets

ISO 1833-20:2009

Textiles -- Quantitative chemical analysis -- Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide)

ISO/IEC 14165-414:2007

Information technology -- Fibre Channel -- Part 414: Generic Services -- 4 (FC-GS-4)

ISO 13906:2008

Animal feeding stuffs -- Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents

ISO 1833-5:2006

Textiles -- Quantitative chemical analysis -- Part 5: Mixtures of viscose cupro or modal and cotton fibres (method using sodium zincate)

ISO 1833-7:2006

Textiles -- Quantitative chemical analysis -- Part 7: Mixtures of polyamide and certain other fibres (method using formic acid)

ISO 1833-17:2006

Textiles -- Quantitative chemical analysis -- Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid)

ISO 1833-16:2006

Textiles -- Quantitative chemical analysis -- Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene)

ISO 1833-6:2007

Textiles -- Quantitative chemical analysis -- Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)

ISO/IEC 14165-133:2010

Information technology -- Fibre Channel -- Part 133: Switch Fabric-3 (FC-SW-3)

ISO 3037:2007

Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)

ISO 1833-2:2006

Textiles -- Quantitative chemical analysis -- Part 2: Ternary fibre mixtures

ISO 1833-8:2006

Textiles -- Quantitative chemical analysis -- Part 8: Mixtures of acetate and triacetate fibres (method using acetone)

ISO 1833-15:2006

Textiles -- Quantitative chemical analysis -- Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content)

ISO 22306:2007

Fibre-reinforced cement pipe joints and fittings for gravity systems

ISO 1833-3:2006

Textiles -- Quantitative chemical analysis -- Part 3: Mixtures of acetate and certain other fibres (method using acetone)

ISO 1833-19:2006

Textiles -- Quantitative chemical analysis -- Part 19: Mixtures of cellulose fibres and asbestos (method by heating)

ISO/IEC 14763-3:2006

Information technology -- Implementation and operation of customer premises cabling -- Part 3: Testing of optical fibre cabling

ISO 1833-9:2006

Textiles -- Quantitative chemical analysis -- Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol)

ISO 1833-10:2006

Textiles -- Quantitative chemical analysis -- Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)

ISO 1833-11:2006

Textiles -- Quantitative chemical analysis -- Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid)

ISO 20506:2005

Fine ceramics (advanced ceramics advanced technical ceramics) -- Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test

ISO 12574-2:2008

Thermal insulation -- Cellulose-fibre loose-fill for horizontal applications in ventilated roof spaces -- Part 2: Principal responsibilities of installers

ISO 1833-21:2006

Textiles -- Quantitative chemical analysis -- Part 21: Mixtures of chlorofibres certain modacrylics certain elastanes acetates triacetates and certain other fibres (method using cyclohexanone)

ISO 1833-13:2006

Textiles -- Quantitative chemical analysis -- Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone)

ISO 1833-4:2006

Textiles -- Quantitative chemical analysis -- Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite)

ISO 1833-14:2006

Textiles -- Quantitative chemical analysis -- Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid)

ISO 20505:2005

Fine ceramics (advanced ceramics advanced technical ceramics) -- Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test

ISO 1833-12:2006

Textiles -- Quantitative chemical analysis -- Part 12: Mixtures of acrylic certain modacrylics certain chlorofibres certain elastanes and certain other fibres (method using dimethylformamide)

ISO 22827-2:2005

Acceptance tests for Nd:YAG laser beam welding machines -- Machines with optical fibre delivery -- Part 2: Moving mechanism

ISO 14127:2008

Carbon-fibre-reinforced composites -- Determination of the resin fibre and void contents

ISO/IEC 14165-222:2005

Information technology -- Fibre Channel -- Part 222: Single-byte command code 2 mapping protocol (FC-SB-2)

ISO 18692:2007

Fibre ropes for offshore stationkeeping -- Polyester

ISO/IEC 14165-122:2005

Information technology -- Fibre Channel -- Part 122: Arbitrated Loop-2 (FC-AL-2)

ISO 18352:2009

Carbon-fibre-reinforced plastics -- Determination of compression-after-impact properties at a specified impact-energy level

ISO/IEC 14776-222:2005

Information technology -- Small Computer System Interface (SCSI) -- Part 222: Fibre Channel Protocol for SCSI Second Version (FCP-2)

ISO/IEC 14165-115:2006

Information technology -- Fibre Channel -- Part 115: Physical Interfaces (FC-PI)

ISO/IEC TR 14165-312:2009

Information technology -- Fibre Channel -- Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)

ISO 16472:2006

Animal feeding stuffs -- Determination of amylase-treated neutral detergent fibre content (aNDF)

ISO/IEC TR 14165-372:2011

Information technology -- Fibre Channel -- Part 372: Methodologies of interconnects-2 (FC-MI-2)

ISO 23713:2005

Pulps -- Determination of fibre coarseness by automated optical analysis -- Polarized light method

ISO/IEC 14165-241:2005

Information technology -- Fibre Channel -- Part 241: Backbone 2 (FC-BB-2)

ISO/IEC 14165-251:2008

Information technology -- Fibre Channel -- Part 251: Framing and Signaling (FC-FS)

ISO/IEC 14165-251:2008

Information technology -- Fibre Channel -- Part 251: Framing and Signaling (FC-FS)

ISO 17751:2007

Textiles -- Quantitative analysis of animal fibres by microscopy -- Cashmere wool speciality fibres and their blends

ISO/IEC 14165-116:2005

Information technology -- Fibre Channel -- Part 116: 10 Gigabit (10GFC)

ISO 22314:2006

Plastics -- Glass-fibre-reinforced products -- Determination of fibre length

ISO 1969:2004

Fibre ropes -- Polyethylene -- 3- and 4-strand ropes

ISO 1346:2004

Fibre ropes -- Polypropylene split film monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) -- 3- 4- and 8-strand ropes

ISO 11119-2:2002

Gas cylinders of composite construction -- Specification and test methods -- Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners

ISO 1141:2004

Fibre ropes -- Polyester -- 3- 4- and 8-strand ropes

ISO 22827-1:2005

Acceptance tests for Nd:YAG laser beam welding machines -- Machines with optical fibre delivery -- Part 1: Laser assembly

ISO 1140:2004

Fibre ropes -- Polyamide -- 3- 4- and 8-strand ropes

ISO 1181:2004

Fibre ropes -- Manila and sisal -- 3- 4- and 8-strand ropes

ISO 527-5:2009

Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

ISO/IEC 14165-114:2005

Information technology -- Fibre Channel -- Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)

ISO 1268-10:2005

Fibre-reinforced plastics -- Methods of producing test plates -- Part 10: Injection moulding of BMC and other long-fibre moulding compounds -- General principles and moulding of multipurpose test specimens

ISO 20504:2006

Fine ceramics (advanced ceramics advanced technical ceramics) -- Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature

ISO/IEC 14165-141:2001

Information technology -- Fibre Channel -- Part 141: Fabric Generic Requirements (FC-FG)

ISO 13586:2000/Amd 1:2003

Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres

ISO 10618:2004

Carbon fibre -- Determination of tensile properties of resin-impregnated yarn

ISO 9554:2010

Fibre ropes -- General specifications

ISO 10548:2002

Carbon fibre -- Determination of size content

ISO 16065-1:2001

Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light method

ISO 15598:1999

Tea -- Determination of crude fibre content

ISO 15733:2001

Fine ceramics (advanced ceramics advanced technical ceramics) -- Test method for tensile stress-strain behaviour of continuous fibre- reinforced composites at room temperature

ISO 15636:2003

Back-up pads for vulcanized fibre discs

ISO 10119:2002

Carbon fibre -- Determination of density

ISO/IEC 14165-211:1999

Information technology -- Fibre Channel -- Part 211: Mapping to HIPPI-FP (FC-FP)

ISO/IEC 9314-13:1998

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma

ISO 15840:2004

Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications

ISO/IEC 8802-5:1998/Amd 1:1998

Dedicated token ring operation and fibre optic media

ISO/IEC 9314-9:2000

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)

ISO 1268-1:2001

Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions

ISO/IEC 9314-20:2001

Information technology -- Fibre Distributed Data Interface (FDDI) -- -- Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)

ISO 14125:1998

Fibre-reinforced plastic composites -- Determination of flexural properties

ISO/IEC 9314-25:1998

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 25: Abstract test suite for FDDI -- Station Management Conformance Testing (SMT-ATS)

ISO 16000-7:2007

Indoor air -- Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations

ISO 14129:1997

Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response including the in-plane shear modulus and strength by the plus or minus 45 degree tension test method

ISO/IEC 9314-21:2000

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)

ISO/IEC 9314-26:2001

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 26: Media Access Control Conformance Testing (MAC-ATS)

ISO 13794:1999

Ambient air -- Determination of asbestos fibres -- Indirect-transfer transmission electron microscopy method

ISO 14130:1997

Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam method

ISO 1968:2004

Fibre ropes and cordage -- Vocabulary

ISO 14126:1999

Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction

ISO 10635:1999

Refractory products -- Methods of test for ceramic fibre products

ISO 9314-1:1989

Information processing systems -- Fibre Distributed Data Interface (FDDI) -- Part 1: Token Ring Physical Layer Protocol (PHY)

ISO 9383:1995

Products in fibre-reinforced cement -- Short corrugated or asymmetrical section sheets and fittings for roofing

ISO 9933:1995

Products in fibre-reinforced cement -- Long corrugated or asymmetrical section sheets and fittings for roofing and cladding

ISO/IEC 9314-5:1995

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 5: Hybrid Ring Control (HRC)

ISO 10306:1993

Textiles -- Cotton fibres -- Evaluation of maturity by the air flow method

ISO 10397:1993

Stationary source emissions -- Determination of asbestos plant emissions -- Method by fibre count measurement

ISO 9314-2:1989

Information processing systems -- Fibre Distributed Data Interface (FDDI) -- Part 2: Token Ring Media Access Control (MAC)

ISO/IEC 9314-3:1990

Information processing systems -- Fibre distributed Data Interface (FDDI) -- Part 3: Physical Layer Medium Dependent (PMD)

ISO 10312:1995

Ambient air -- Determination of asbestos fibres -- Direct transfer transmission electron microscopy method

ISO 5498:1981

Agricultural food products -- Determination of crude fibre content -- General method

ISO 6938:1984

Textiles -- Natural fibres -- Generic names and definitions

ISO 2113:1996

Reinforcement fibres -- Woven fabrics -- Basis for a specification

ISO 6741-1:1989

Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 1: Mass determination and calculations

ISO/TR 6741-4:1987

Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 4: Values used for the commercial allowances and the commercial moisture regains

ISO 6865:2000

Animal feeding stuffs -- Determination of crude fibre content -- Method with intermediate filtration

ISO/TR 1896:1991

Products in fibre-reinforced cement -- Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection

ISO 5638:1978

Solid fibreboard -- Determination of grammage of single layers

ISO 6541:1981

Agricultural food products -- Determination of crude fibre content -- Modified Scharrer method

ISO 6989:1981

Textile fibres -- Determination of length and length distribution of staple fibres (by measurement of single fibres)

ISO 6741-2:1987

Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 2: Methods for obtaining laboratory samples

ISO 6741-3:1987

Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 3: Specimen cleaning procedures

ISO 1130:1975

Textile fibres -- Some methods of sampling for testing

ISO 1136:1976

Wool -- Determination of mean diameter of fibres -- Air permeability method

ISO 3035:1982

Single-faced and single-wall corrugated fibreboard -- Determination of flat crush resistance

ISO 2647:1973

Wool -- Determination of percentage of medullated fibres by the projection microscope

ISO 2370:1980

Textiles -- Determination of fineness of flax fibres -- Permeametric methods

ISO/IEC 14165-521:2009

Information technology -- Fibre Channel -- Part 521: Fabric application interface standard (FAIS)

ISO 2648:1974

Wool -- Determination of fibre length distribution parameters -- Electronic method

ISO 3034:1975

Corrugated fibreboard -- Determination of thickness

ISO 3060:1974

Textiles -- Cotton fibres -- Determination of breaking tenacity of flat bundles

ISO 1833:1977

Textiles -- Binary fibre mixtures -- Quantitative chemical analysis

ISO 2403:1972

Textiles -- Cotton fibres -- Determination of micronaire value

ISO 1973:1995

Textile fibres -- Determination of linear density -- Gravimetric method and vibroscope method

ISO 3038:1975

Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion

ISO 3155:1976

Stranded wire ropes for mine hoisting -- Fibre components -- Characteristics and tests

ISO 2646:1974

Wool -- Measurement of the length of fibres processed on the worsted system using a fibre diagram machine

ISO 1268-11:2005

Fibre-reinforced plastics -- Methods of producing test plates -- Part 11: Injection moulding of BMC and other long-fibre moulding compounds -- Small plates

ISO 12215-1:2000

Small craft -- Hull construction and scantlings -- Part 1: Materials: Thermosetting resins glass-fibre reinforcement reference laminate

ISO 16895-1:2008

Wood-based panels -- Dry-process fibreboard -- Part 1: Classifications

ISO 16895-2:2010

Wood-based panels -- Dry-process fibreboard -- Part 2: Requirements

ISO/IEC 14776-223:2008

Information technology -- Small Computer System Interface (SCSI) -- Part 223: Fibre Channel Protocol for SCSI Third Version (FCP-3)

ISO 13003:2003

Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions

ISO 17771:2003

Plastics -- Thermoset moulding compounds -- Determination of the degree of fibre wetting in SMC

ISO 15024:2001

Fibre-reinforced plastic composites -- Determination of mode I interlaminar fracture toughness GIC for unidirectionally reinforced materials

ISO 75-3:2004

Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

ISO 17064:2004

Wood-based panels -- Fibreboard particleboard and oriented strand board (OSB) -- Vocabulary

ISO 2307:2010

Fibre ropes -- Determination of certain physical and mechanical properties

ISO 16057:2002

Coated abrasives -- Vulcanized fibre discs

ISO 1268-6:2002

Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding

ISO 1268-7:2001

Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding

ISO 1268-8:2004

Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC

ISO/IEC 14165-321:2009

Information technology -- Fibre Channel -- Part 321: Audio-Video (FC-AV)

ISO 15100:2000

Plastics -- Reinforcement fibres -- Chopped strands -- Determination of bulk density

ISO 1268-4:2005

Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs

ISO 15310:1999

Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method

ISO 1268-2:2001

Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding

ISO 17504:1999

Textile floor coverings -- Determination of wool fibre integrity using an abrasion machine

ISO 11119-3:2002

Gas cylinders of composite construction -- Specification and test methods -- Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners

ISO/IEC 14165-131:2000

Information technology -- Fibre Channel -- Part 131: Switch Fabric Requirements (FC-SW)

ISO/IEC 9314-6:1998

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 6: Station Management (SMT)

ISO 1268-5:2001

Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding

ISO 1268-9:2003

Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC

ISO 1268-3:2000

Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding

ISO 13820:1996

Paper board and corrugated fibreboard -- Description and calibration of compression-testing equipment

ISO/PAS 11856:2003

Textile floor coverings -- Test methods for the determination of fibre bind

ISO 11667:1997

Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of resin reinforced-fibre and mineral-filler content -- Dissolution methods

ISO 11566:1996

Carbon fibre -- Determination of the tensile properties of single-filament specimens

ISO 11923:1997

Water quality -- Determination of suspended solids by filtration through glass-fibre filters

ISO 12114:1997

Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of cure characteristics

ISO 16065-2:2007

Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method

ISO 12115:1997

Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of flowability maturation and shelf life

ISO 11567:1995

Carbon fibre -- Determination of filament diameter and cross-sectional area

ISO 13821:2002

Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method

ISO 9184-5:1990

Paper board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar)

ISO 8142:1990

Thermal insulation -- Bonded preformed man-made mineral fibre pipe sections -- Specification

ISO 8159:1987

Textiles -- Morphology of fibres and yarns -- Vocabulary

ISO 8115-2:1994

Bales -- Part 2: Bales of man-made staple fibres -- Dimensions

ISO 8672:1993

Air quality -- Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy -- Membrane filter method

ISO 9184-2:1990

Paper board and pulps -- Fibre furnish analysis -- Part 2: Staining guide

ISO 9184-1:1990

Paper board and pulps -- Fibre furnish analysis -- Part 1: General method

ISO 7884-3:1987

Glass -- Viscosity and viscometric fixed points -- Part 3: Determination of viscosity by fibre elongation viscometer

ISO 3505:1975

Ropes and cordage -- Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels

ISO 4912:1981

Textiles -- Cotton fibres -- Evaluation of maturity -- Microscopic method

ISO 4913:1981

Textiles -- Cotton fibres -- Determination of length (span length) and uniformity index

ISO 5079:1995

Textile fibres -- Determination of breaking force and elongation at break of individual fibres

ISO 4345:1988

Steel wire ropes -- Fibre main cores -- Specification

ISO 9184-3:1990

Paper board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test

ISO 3340:1976

Fibre building boards -- Determination of sand content

ISO 105-Z03:1996

Textiles -- Tests for colour fastness -- Part Z03: Intercompatibility of basic dyes for acrylic fibres

ISO 13002:1998

Carbon fibre -- Designation system for filament yarns

ISO 137:1975

Wool -- Determination of fibre diameter -- Projection microscope method

ISO 920:1976

Wool -- Determination of fibre length (barbe and hauteur) using a comb sorter

ISO/IEC 9314-8:1998

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 8: Media Access Control-2 (MAC-2)

ISO/IEC 9314-4:1999

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)

ISO 9184-4:1990

Paper board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test

ISO 527-4:1997

Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

ISO 9184-7:1994

Paper board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor

ISO 9184-6:1994

Paper board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness

ISO 390:1993

Products in fibre-reinforced cement -- Sampling and inspection

ISO/IEC 9314-7:1998

Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 7: Physical layer Protocol (PHY-2)

ISO 105-F10:1989

Textiles -- Tests for colour fastness -- Part F10: Specification for adjacent fabric: Multifibre

ISO 3039:2010

Corrugated fibreboard -- Determination of grammage of the component papers after separation

ISO 8336:2009

Fibre-cement flat sheets -- Product specification and test methods

ISO 10572:2009

Mixed polyolefin fibre ropes