Page Header

Electronics & Appliances - Certification & Assessment

Management system services and solutions

We provide certification and assessment services and training for all of the Electronics & Appliances processes, equipment, accessories, services and standards. Auditing and certification is undertaken using specialist assessors in this sector.

Product certification & marks

SABS Product Services offer a Qualification Scheme for the Electronics & Appliances Industry. This scheme provides the Electronics & Appliances components industry with an independent qualification service that enables them to demonstrate compliance through a qualification certificate.

Related certifications

ISO/TR 13154:2009

Medical electrical equipment -- Deployment implementation and operational guidelines for indentifying febrile humans using a screening thermograph

ISO 5821:2009

Resistance welding -- Spot welding electrode caps

ISO 7176-9:2009

Wheelchairs -- Part 9: Climatic tests for electric wheelchairs

ISO 22200:2009

Electromagnetic compatibility -- Product family standard for lifts escalators and moving walks -- Immunity

ISO 11073-91064:2009

Health informatics -- Standard communication protocol -- Part 91064: Computer-assisted electrocardiography

ISO 11148-4:2010

Hand-held non-electric power tools -- Safety requirements -- Part 4: Non-rotary percussive power tools

ISO 28620:2010

Medical devices -- Non-electrically driven portable infusion devices

ISO 14172:2008

Welding consumables -- Covered electrodes for manual metal arc welding of nickel and nickel alloys -- Classification

ISO 13606-5:2010

Health informatics -- Electronic health record communication -- Part 5: Interface specification

ISO 11148-6:2010

Hand-held non-electric power tools -- Safety requirements -- Part 6: Assembly power tools for threaded fasteners

ISO 29301:2010

Microbeam analysis -- Analytical transmission electron microscopy -- Methods for calibrating image magnification by using reference materials having periodic structures

ISO 1456:2009

Metallic and other inorganic coatings -- Electrodeposited coatings of nickel nickel plus chromium copper plus nickel and of copper plus nickel plus chromium

ISO/TR 9241-308:2008

Ergonomics of human-system interaction -- Part 308: Surface-conduction electron-emitter displays (SED)

ISO/TR 21730:2007

Health informatics -- Use of mobile wireless communication and computing technology in healthcare facilities -- Recommendations for electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices

ISO 13319:2007

Determination of particle size distributions -- Electrical sensing zone method

ISO 16773-3:2009

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 3: Processing and analysis of data from dummy cells

ISO/TR 12033:2009

Document management -- Electronic imaging -- Guidance for the selection of document image compression methods

ISO 13950:2007

Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints

ISO 10605:2008

Road vehicles -- Test methods for electrical disturbances from electrostatic discharge

ISO 24173:2009

Microbeam analysis -- Guidelines for orientation measurement using electron backscatter diffraction

ISO 27874:2008

Metallic and other inorganic coatings -- Electrodeposited gold and gold alloy coatings for electrical electronic and engineering purposes -- Specification and test methods

ISO 8031:2009

Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance and conductivity

ISO 80601-2-56:2009

Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement

ISO 26304:2008

Welding consumables -- Solid wire electrodes tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels -- Classification

ISO 14744-1:2008

Welding -- Acceptance inspection of electron beam welding machines -- Part 1: Principles and acceptance conditions

ISO 9517:2007

Iron ores -- Determination of water-soluble chloride -- Ion-selective electrode method

ISO/TS 21547:2010

Health informatics -- Security requirements for archiving of electronic health records -- Principles

ISO 25297-1:2010

Optics and photonics -- Electronic exchange of optical data -- Part 1: NODIF information model

IEC 80601-2-30:2009

Medical electrical equipment -- Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers

ISO 4521:2008

Metallic and other inorganic coatings -- Electrodeposited silver and silver alloy coatings for engineering purposes -- Specification and test methods

ISO/IEC 28360:2007

Information technology -- Office equipment -- Determination of chemical emission rates from electronic equipment

ISO/IEC 14543-3-3:2007

Information technology -- Home electronic system (HES) architecture -- Part 3-3: User process for network based control of HES Class 1

ISO/IEC 14543-3-4:2007

Information technology -- Home electronic system (HES) architecture -- Part 3-4: System management -- Management procedures for network based control of HES Class 1

ISO/IEC 14543-5-1:2010

Information technology -- Home electronic system (HES) architecture -- Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 -- Core protocol

ISO/IEC 14543-5-4:2010

Information technology -- Home electronic system (HES) architecture -- Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 -- Device validation

IEC 60601-1-10:2007

Medical electrical equipment -- Part 1-10: General requirements for basic safety and essential performance -- Collateral standard: Requirements for the development of physiologic closed-loop controllers

ISO 2081:2008

Metallic and other inorganic coatings -- Electroplated coatings of zinc with supplementary treatments on iron or steel

ISO/IEC 14543-3-6:2007

Information technology -- Home electronic system (HES) architecture -- Part 3-6: Media and media dependent layers -- Network based on HES Class 1 twisted pair

ISO 10893-1:2011

Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness

ISO/IEC 14543-3-7:2007

Information technology -- Home electronic system (HES) architecture -- Part 3-7: Media and media dependent layers -- Radio frequency for network based control of HES Class 1

ISO 1230:2007

Photography -- Determination of flash guide numbers for electronic flash equipment

ISO 8260:2008

Milk and milk products -- Determination of organochlorine pesticides and polychlorobiphenyls -- Method using capillary gas-liquid chromatography with electron-capture detection

ISO 7240-27:2009

Fire detection and alarm systems -- Part 27: Point-type fire detectors using a scattered-light transmitted-light or ionization smoke sensor an electrochemical-cell carbon-monoxide sensor and a heat sensor

ISO 14524:2009

Photography -- Electronic still-picture cameras -- Methods for measuring opto-electronic conversion functions (OECFs)

ISO/IEC 14543-4-1:2008

Information technology -- Home electronic system (HES) architecture -- Part 4-1: Communication layers -- Application layer for network enhanced control devices of HES Class 1

ISO 7507-4:2010

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 4: Internal electro-optical distance-ranging method

ISO 11413:2008

Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

ISO 2082:2008

Metallic and other inorganic coatings -- Electroplated coatings of cadmium with supplementary treatments on iron or steel

ISO 28439:2011

Workplace atmospheres -- Characterization of ultrafine aerosols/nanoaerosols -- Determination of the size distribution and number concentration using differential electrical mobility analysing systems

ISO/IEC 14543-3-5:2007

Information technology -- Home electronic system (HES) architecture -- Part 3-5: Media and media dependent layers -- Power line for network based control of HES Class 1

ISO 7634:2007

Road vehicles -- Compressed air braking systems for towed vehicles including those with electronic braking control functions -- Test procedures

ISO 20280:2007

Soil quality -- Determination of arsenic antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry

ISO/TR 21548:2010

Health informatics -- Security requirements for archiving of electronic health records -- Guidelines

ISO 10041-1:2010

Pneumatic fluid power -- Electro-pneumatic continuous flow control valves -- Part 1: Main characteristics to include in the supplier's literature

ISO 10094-2:2010

Pneumatic fluid power -- Electro-pneumatic pressure control valves -- Part 2: Test methods to determine main characteristics to include in the supplier's literature

ISO/TS 24534-5:2008

Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 5: Secure communications using symmetrical techniques

ISO 12176-2:2008

Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion

IEC 80601-2-59:2008

Medical electrical equipment -- Part 2-59: Particular requirements for basic safety and essential performance of screening thermographs for human febrile temperature screening

ISO/TS 22224:2009

Health informatics -- Electronic reporting of adverse drug reactions

ISO 10041-2:2010

Pneumatic fluid power -- Electro-pneumatic continuous flow control valves -- Part 2: Test methods to determine main characteristics to include in the supplier's literature

ISO 17573:2010

Electronic fee collection -- Systems architecture for vehicle-related tolling

ISO 16750-2:2010

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads

ISO 15740:2008

Photography -- Electronic still picture imaging -- Picture transfer protocol (PTP) for digital still photography devices

ISO 6469-2:2009

Electrically propelled road vehicles -- Safety specifications -- Part 2: Vehicle operational safety means and protection against failures

ISO 22201:2009

Lifts (elevators) -- Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL)

ISO 15726:2009

Metallic and other inorganic coatings -- Electrodeposited zinc alloys with nickel cobalt or iron

ISO 17334:2008

Metallic and other inorganic coatings -- Autocatalytic nickel over autocatalytic copper for electromagnetic shielding

IEC 60601-1-11:2010

Medical electrical equipment -- Part 1-11: General requirements for basic safety and essential performance -- Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

ISO 2560:2009

Welding consumables -- Covered electrodes for manual metal arc welding of non-alloy and fine grain steels -- Classification

ISO/TS 13606-4:2009

Health informatics -- Electronic health record communication -- Part 4: Security

ISO 10770-1:2009

Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-port directional flow-control valves

ISO 14341:2010

Welding consumables -- Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels -- Classification

ISO 6469-1:2009

Electrically propelled road vehicles -- Safety specifications -- Part 1: On-board rechargeable energy storage system (RESS)

ISO 29081:2010

Surface chemical analysis -- Auger electron spectroscopy -- Reporting of methods used for charge control and charge correction

ISO 10094-1:2010

Pneumatic fluid power -- Electro-pneumatic pressure control valves -- Part 1: Main characteristics to include in the supplier's literature

ISO 16750-5:2010

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 5: Chemical loads

ISO 14171:2010

Welding consumables -- Solid wire electrodes tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels -- Classification

ISO 11506:2009

Document management applications -- Archiving of electronic data -- Computer output microform (COM) / Computer output laser disc (COLD)

ISO 16750-4:2010

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads

ISO 10810:2010

Surface chemical analysis -- X-ray photoelectron spectroscopy -- Guidelines for analysis

ISO/IEC/IEEE 21451-4:2010

Information technology -- Smart transducer interface for sensors and actuators -- Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats

ISO/HL7 10781:2009

Electronic Health Record-System Functional Model Release 1.1

IEC 80601-2-58:2008

Medical electrical equipment -- Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

ISO/IEC 14762:2009

Information technology -- Functional safety requirements for Home and Building Electronic Systems (HBES)

IEC 61340-4-4:2005

Electrostatics -- Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

IEC 60601-1-8:2006

Medical electrical equipment -- Part 1-8: General requirements for basic safety and essential performance -- Collateral standard: General requirements tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

ISO 5002:2008

Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities

ISO/TS 25110:2008

Electronic fee collection -- Interface definition for on-board account using integrated circuit card (ICC)

ISO 10770-3:2007

Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 3: Test methods for pressure control valves

ISO 11452-10:2009

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Immunity to conducted disturbances in the extended audio frequency range

ISO 1540:2006

Aerospace -- Characteristics of aircraft electrical systems

ISO 12234-1:2007

Electronic still-picture imaging -- Removable memory -- Part 1: Basic removable-memory model

ISO/IEC 14543-2-1:2006

Information technology - Home Electronic Systems (HES) Architecture -- Part 2-1: Introduction and device modularity

ISO 28005-2:2011

Security management systems for the supply chain -- Electronic port clearance (EPC) -- Part 2: Core data elements

ISO 24598:2007

Welding consumables -- Solid wire electrodes tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels -- Classification

ISO 11452-11:2010

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 11: Reverberation chamber

ISO 16773-4:2009

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 4: Examples of spectra of polymer-coated specimens

ISO 9241-300:2008

Ergonomics of human-system interaction -- Part 300: Introduction to electronic visual display requirements

ISO 13606-2:2008

Health informatics -- Electronic health record communication -- Part 2: Archetype interchange specification

ISO 21952:2007

Welding consumables -- Wire electrodes wires rods and deposits for gas-shielded arc welding of creep-resisting steels -- Classification

ISO 2926:2005

Aluminium oxide used for the production of primary aluminium -- Particle size analysis for the range 45 m to 150 m -- Method using electroformed sieves

ISO 9241-307:2008

Ergonomics of human-system interaction -- Part 307: Analysis and compliance test methods for electronic visual displays

ISO 6848:2004

Arc welding and cutting -- Nonconsumable tungsten electrodes -- Classification

ISO 18185-5:2007

Freight containers -- Electronic seals -- Part 5: Physical layer

ISO 22734-1:2008

Hydrogen generators using water electrolysis process -- Part 1: Industrial and commercial applications

ISO 21178:2005

Light conveyor belts -- Determination of electrical resistances

ISO 21179:2005

Light conveyor belts -- Determination of the electrostatic field generated by a running light conveyor belt

ISO 9241-302:2008

Ergonomics of human-system interaction -- Part 302: Terminology for electronic visual displays

ISO/IEC 14543-4-2:2008

Information technology -- Home electronic system (HES) architecture -- Part 4-2: Communication layers -- Transport network and general parts of data link layer for network enhanced control devices of HES Class 1

ISO 9241-304:2008

Ergonomics of human-system interaction -- Part 304: User performance test methods for electronic visual displays

ISO 6145-11:2005

Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 11: Electrochemical generation

ISO/TS 14907-2:2006

Road transport and traffic telematics -- Electronic fee collection -- Test procedures for user and fixed equipment -- Part 2: Conformance test for the onboard unit application interface

ISO 24637:2009

Space systems -- Electromagnetic interference (EMI) test reporting requirements

ISO 7240-8:2007

Fire detection and alarm systems -- Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor

ISO 25498:2010

Microbeam analysis -- Analytical electron microscopy -- Selected-area electron diffraction analysis using a transmission electron microscope

ISO 9241-303:2008

Ergonomics of human-system interaction -- Part 303: Requirements for electronic visual displays

ISO 13606-1:2008

Health informatics -- Electronic health record communication -- Part 1: Reference model

ISO 18185-4:2007

Freight containers -- Electronic seals -- Part 4: Data protection

ISO 5940-2:2007

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Part 2: Determination of the softening point (Mettler softening point method)

ISO 22489:2006

Microbeam analysis -- Electron probe microanalysis -- Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy

ISO 18274:2010

Welding consumables -- Solid wire electrodes solid strip electrodes solid wires and solid rods for fusion welding of nickel and nickel alloys -- Classification

ISO 9241-305:2008

Ergonomics of human-system interaction -- Part 305: Optical laboratory test methods for electronic visual displays

ISO 13366-2:2006

Milk -- Enumeration of somatic cells -- Part 2: Guidance on the operation of fluoro-opto-electronic counters

ISO 7637-3:2007

Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

ISO 18185-3:2006

Freight containers -- Electronic seals -- Part 3: Environmental characteristics

ISO 18185-1:2007

Freight containers -- Electronic seals -- Part 1: Communication protocol

ISO 5950:2008

Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities

ISO 22493:2008

Microbeam analysis -- Scanning electron microscopy -- Vocabulary

ISO 7176-4:2008

Wheelchairs -- Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range

ISO/TS 15000-5:2005

Electronic Business Extensible Markup Language (ebXML) -- Part 5: ebXML Core Components Technical Specification Version 2.01(ebCCTS)

ISO 22554:2007

Ships and marine technology -- Propeller shaft revolution indicators -- Electric type and electronic type

ISO 20903:2006

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Methods used to determine peak intensities and information required when reporting results

ISO 23273-3:2006

Fuel cell road vehicles -- Safety specifications -- Part 3: Protection of persons against electric shock

ISO/TR 11071-1:2004

Comparison of worldwide lift safety standards -- Part 1: Electric lifts (elevators)

ISO 18185-2:2007

Freight containers -- Electronic seals -- Part 2: Application requirements

ISO 9241-306:2008

Ergonomics of human-system interaction -- Part 306: Field assessment methods for electronic visual displays

ISO 17081:2004

Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique

ISO 21318:2007

Plastics -- Epoxy resins -- Determination of electrical conductivity of aqueous resin extracts

ISO/IEC 7816-12:2005

Identification cards - Integrated circuit cards -- Part 12: Cards with contacts -- USB electrical interface and operating procedures

ISO 11452-8:2007

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fields

ISO 23552-1:2007

Safety and control devices for gas and/or oil burners and gas and/or oil appliances -- Particular requirements -- Part 1: Fuel/air ratio controls electronic type

ISO/ASTM 51649:2005

Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV

ISO 18516:2006

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution

ISO 5182:2008

Resistance welding -- Materials for electrodes and ancillary equipment

ISO 7240-6:2004

Fire detection and alarm systems -- Part 6: Carbon monoxide fire detectors using electro-chemical cells

ISO 16750-3:2007

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads

ISO 20673:2007

Ships and marine technology -- Electric rudder angle indicators

ISO 20860-1:2008

Road vehicles -- 50 ohms impedance radio frequency connection system interface -- Part 1: Dimensions and electrical requirements

ISO/TR 20514:2005

Health informatics -- Electronic health record -- Definition scope and context

ISO 20653:2006

Road vehicles -- Degrees of protection (IP-Code) -- Protection of electrical equipment against foreign objects water and access

ISO 15003:2006

Agricultural engineering -- Electrical and electronic equipment -- Testing resistance to environmental conditions

ISO/TR 18392:2005

Surface chemical analysis -- X-ray photoelectron spectroscopy -- Procedures for determining backgrounds

ISO 16750-1:2006

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 1: General

ISO 10469:2006

Copper sulfide concentrates -- Determination of copper -- Electrogravimetric method

ISO 15900:2009

Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles

ISO 7176-14:2008

Wheelchairs -- Part 14: Power and control systems for electrically powered wheelchairs and scooters -- Requirements and test methods

ISO 19005-1:2005

Document management -- Electronic document file format for long-term preservation -- Part 1: Use of PDF 1.4 (PDF/A-1)

ISO 11608-4:2006

Pen-injectors for medical use -- Part 4: Requirements and test methods for electronic and electromechanical pen-injectors

ISO 16175-1:2010

Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 1: Overview and statement of principles

ISO/TR 18394:2006

Surface chemical analysis -- Auger electron spectroscopy -- Derivation of chemical information

ISO/IEC 7816-3:2006

Identification cards -- Integrated circuit cards -- Part 3: Cards with contacts -- Electrical interface and transmission protocols

ISO/TS 15000-3:2004

Electronic business eXtensible Markup Language (ebXML) -- Part 3: Registry information model specification (ebRIM)

ISO 8092-2:2005

Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions test methods and general performance requirements

ISO 24535:2007

Intelligent transport systems -- Automatic vehicle identification -- Basic electronic registration identification (Basic ERI)

ISO/TS 15000-4:2004

Electronic business eXtensible Markup Language (ebXML) -- Part 4: Registry services specification (ebRS)

ISO 15472:2010

Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales

ISO 15830-3:2005

Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 3: Electronic subsystems

ISO 2878:2005

Rubber -- Antistatic and conductive products -- Determination of electrical resistance

ISO 26945:2011

Metallic and other inorganic coatings -- Electrodeposited coatings of tin-cobalt alloy

ISO/TR 18492:2005

Long-term preservation of electronic document-based information

ISO 11451-3:2007

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation

ISO 16592:2006

Microbeam analysis -- Electron probe microanalysis -- Guidelines for determining the carbon content of steels using a calibration curve method

ISO/IEC/IEEE 21451-2:2010

Information technology -- Smart transducer interface for sensors and actuators -- Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formats

ISO 24236:2005

Surface chemical analysis -- Auger electron spectroscopy -- Repeatability and constancy of intensity scale

ISO 11451-2:2005

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources

ISO 2635:2003

Aircraft -- Conductors for general purpose aircraft electrical cables and aerospace applications -- Dimensions and characteristics

ISO 8843:2005

Aircraft -- Crimp-removable contacts for electrical connectors -- Identification system

ISO/IEC/IEEE 21450:2010

Information technology -- Smart transducer interface for sensors and actuators -- Common functions communication protocols and Transducer Electronic Data Sheet (TEDS) formats

ISO 17129:2006

Milk powder -- Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE) -- Screening method

ISO 6597:2005

Road vehicles -- Hydraulic braking systems including those with electronic control functions for motor vehicles -- Test procedures

ISO/TS 20625:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Rules for generation of XML scheme files (XSD) on the basis of EDI(FACT) implementation guidelines

ISO 11452-1:2005

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

ISO 12231:2005

Photography -- Electronic still picture imaging -- Vocabulary

ISO 16392:2007

Tyres -- Electrical resistance -- Test method for measuring electrical resistance of tyres on a test rig

ISO 16773-1:2007

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 1: Terms and definitions

ISO/ASTM 51818:2009

Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV

ISO 8713:2005

Electric road vehicles -- Vocabulary

ISO 23833:2006

Microbeam analysis -- Electron probe microanalysis (EPMA) -- Vocabulary

ISO/TR 10305-2:2003

Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 2: IEEE standard for calibration of electromagnetic field sensors and probes excluding antennas from 9 kHz to 40 GHz

ISO 11451-1:2005

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology

ISO 11452-4:2005

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

ISO 11451-4:2006

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

ISO 6158:2004

Metallic coatings -- Electrodeposited coatings of chromium for engineering purposes

ISO/TS 15000-2:2004

Electronic business eXtensible Markup Language (ebXML) -- Part 2: Message service specification (ebMS)

ISO 11452-7:2003

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection

ISO 7635:2006

Road vehicles -- Air and air/hydraulic braking systems of motor vehicles including those with electronic control functions -- Test procedures

ISO 24237:2005

Surface chemical analysis -- X-ray photoelectron spectroscopy -- Repeatability and constancy of intensity scale

ISO 4526:2004

Metallic coatings -- Electroplated coatings of nickel for engineering purposes

ISO 16834:2006

Welding consumables -- Wire electrodes wires rods and deposits for gas-shielded arc welding of high strength steels -- Classification

ISO 16773-2:2007

Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 2: Collection of data

ISO/ASTM 51631:2003

Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

ISO 22072:2005

Aerospace -- Electrohydrostatic actuator (EHA) -- Characteristics to be defined in procurement specifications

ISO/IEC TR 14543-4:2002

Information technology -- Home Electronic System (HES) architecture -- Part 4: Home and building automation in a mixed-use building

ISO 4525:2003

Metallic coatings -- Electroplated coatings of nickel plus chromium on plastics materials

ISO/TS 14904:2002

Road transport and traffic telematics -- Electronic fee collection (EFC) -- Interface specification for clearing between operators

ISO/TR 10305-1:2003

Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz

ISO 11452-2:2004

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure

ISO 17123-5:2005

Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 5: Electronic tacheometers

ISO/ASTM 51431:2005

Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing

ISO/TR 14105:2001

Electronic imaging -- Human and organizational issues for successful Electronic Image Management (EIM) implementation

ISO 6257:2002

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Sampling

IEC 60601-2-52:2009

Medical electrical equipment -- Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

ISO 14154:2005

Soil quality -- Determination of some selected chlorophenols -- Gas-chromatographic method with electron-capture detection

ISO 4527:2003

Metallic coatings -- Autocatalytic (electroless) nickel-phosphorus alloy coatings -- Specification and test methods

ISO 22938:2008

Document management -- Electronic content/document management (CDM) data interchange format

ISO/TR 17671-7:2004

Welding -- Recommendations for welding of metallic materials -- Part 7: Electron beam welding

ISO 14906:2004

Road transport and traffic telematics -- Electronic fee collection -- Application interface definition for dedicated short-range communication

ISO 22374:2005

Dentistry -- Dental handpieces -- Electrical-powered scalers and scaler tips

ISO 518:2006

Photography -- Camera accessory shoes with and without electrical contacts for photoflash lamps and electronic photoflash units -- Specification

ISO 23038:2006

Space systems -- Space solar cells -- Electron and proton irradiation test methods

ISO 24034:2010

Welding consumables -- Solid wire electrodes solid wires and rods for fusion welding of titanium and titanium alloys -- Classification

ISO 14966:2002

Ambient air -- Determination of numerical concentration of inorganic fibrous particles -- Scanning electron microscopy method

ISO/IEC 10021-8:1999

Information technology -- Message Handling Systems (MHS) -- Part 8: Electronic Data Interchange Messaging Service

ISO/IEC 19752:2004

Information technology -- Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components

IEC/PAS 60092-510:2009

Electrical installations in ships -- Special features -- High Voltage Shore Connection Systems (HVSC-Systems)

ISO 9707:2008

Information and documentation -- Statistics on the production and distribution of books newspapers periodicals and electronic publications

ISO 12917-2:2002

Petroleum and liquid petroleum products -- Calibration of horizontal cylindrical tanks -- Part 2: Internal electro-optical distance-ranging method

ISO/TR 22957:2009

Document management -- Analysis selection and implementation of electronic document management systems (EDMS)

ISO 21270:2004

Surface chemical analysis -- X-ray photoelectron and Auger electron spectrometers -- Linearity of intensity scale

ISO 11992-4:2005

Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 4: Diagnostics

ISO 10330:2002

Photography -- Synchronizers ignition circuits and connectors for cameras and photoflash units -- Electrical characteristics and test methods

ISO 22826:2005

Destructive tests on welds in metallic materials -- Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

ISO 9230:2007

Information and documentation -- Determination of price indexes for print and electronic media purchased by libraries

ISO 16067-2:2004

Photography - Electronic scanners for photographic images - Spatial resolution measurements -- Part 2: Film scanners

ISO/IEC 10192-1:2002

Information technology -- Home Electronic System (HES) interfaces -- Part 1: Universal Interface (UI) Class 1

ISO 21550:2004

Photography -- Electronic scanners for photographic images -- Dynamic range measurements

ISO 461-1:2003

Aircraft -- Connectors for ground electrical supplies -- Part 1: Design performance and test requirements

ISO 11992-3:2003

Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 3: Application layer for equipment other than brakes and running gear

ISO/TR 10201:2001

Aerospace -- Standards for electronic instruments and systems

ISO 11992-2:2003

Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 2: Application layer for brakes and running gear

ISO 12980:2000

Carbonaceous materials used in the production of aluminium -- Green coke and calcined coke for electrodes -- Analysis using an X-ray fluorescence method

ISO/TS 18308:2004

Health informatics -- Requirements for an electronic health record architecture

ISO 12233:2000

Photography -- Electronic still-picture cameras -- Resolution measurements

ISO 7176-2:2001

Wheelchairs -- Part 2: Determination of dynamic stability of electric wheelchairs

ISO 17687:2007

Transport Information and Control Systems (TICS) -- General fleet management and commercial freight operations -- Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation

ISO 9655:2004

Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating

ISO 20279:2005

Soil quality -- Extraction of thallium and determination by electrothermal atomic absorption spectrometry

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO 8166:2003

Resistance welding -- Procedure for the evaluation of the life of spot welding electrodes using constant machine settings

ISO 11992-1:2003

Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 1: Physical and data-link layers

ISO/TR 19319:2003

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution analysis area and sample area viewed by the analyser

ISO 20401:2005

Pneumatic fluid power systems -- Directional control valves -- Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm

ISO 9657:2004

Pliers and nippers for electronics -- General technical requirements

ISO 8714:2002

Electric road vehicles -- Reference energy consumption and range -- Test procedures for passenger cars and light commercial vehicles

ISO 5183-2:2000

Resistance spot welding -- Electrode adaptors male taper 1:10 -- Part 2: Parallel shank fixing for end-thrust electrodes

ISO/IEC TR 15067-3:2000

Information technology -- Home Electronic Systems (HES) application model -- Part 3: Model of an energy management system for HES

ISO 17632:2004

Welding consumables -- Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels -- Classification

ISO 284:2003

Conveyor belts -- Electrical conductivity -- Specification and test method

ISO 12732:2006

Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)

ISO 19318:2004

Surface chemical analysis -- X-ray photoelectron spectroscopy -- Reporting of methods used for charge control and charge correction

ISO 8849:2003

Small craft -- Electrically operated direct-current bilge pumps

ISO 16844-2:2011

Road vehicles -- Tachograph systems -- Part 2: Electrical interface with recording unit

ISO 8979:2004

Pliers and nippers for electronics -- Nomenclature

ISO 9654:2004

Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers

ISO 21647:2004

Medical electrical equipment -- Particular requirements for the basic safety and essential performance of respiratory gas monitors

ISO 16844-1:2001

Road vehicles -- Tachograph systems -- Part 1: Electrical connectors

ISO/IEC TR 15067-4:2001

Information technology -- Home Electronic System (HES) Application Model -- Part 4: Security System for HES

ISO 12710:2002

Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments

ISO/IEC TR 10192-2:2000

Information technology -- Home Electronic Systemes (HES) interfaces -- Part 2: Simple Interfaces Type 1

ISO 11713:2000

Carbonaceous materials used in the production of aluminium -- Cathode blocks and baked anodes -- Determination of electrical resistivity at ambient temperature

ISO 4165:2001

Road vehicles -- Electrical connections -- Double-pole connection

ISO 9656:2004

Pliers and nippers for electronics -- Test methods

ISO 10134:2003

Small craft -- Electrical devices -- Lightning-protection systems

ISO 21107:2004

Rolling bearings and spherical plain bearings -- Search structure for electronic media -- Characteristics and performance criteria identified by attribute vocabulary

ISO/TS 13141:2010

Electronic fee collection -- Localisation augmentation communication for autonomous systems

ISO/TS 15768:2000

Measurement of liquid velocity in open channels -- Design selection and use of electromagnetic current meters

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO 15998:2008

Earth-moving machinery -- Machine-control systems (MCS) using electronic components -- Performance criteria and tests for functional safety

ISO 3581:2003

Welding consumables -- Covered electrodes for manual metal arc welding of stainless and heat-resisting steels -- Classification

ISO 12098:2004

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 15-pole connector for vehicles with 24 V nominal supply voltage

ISO 15744:2002

Hand-held non-electric power tools -- Noise measurement code -- Engineering method (grade 2)

ISO 14621-2:2003

Space systems -- Electrical electronic and electromechanical (EEE) parts -- Part 2: Control programme requirements

ISO 17123-4:2001

Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM instruments)

ISO 1724:2003

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage

ISO 6998:1997

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of coking value

ISO 4091:2003

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Definitions tests and requirements

ISO 1185:2003

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage

ISO 7637-1:2002

Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations

ISO 15739:2003

Photography -- Electronic still-picture imaging -- Noise measurements

ISO 18118:2004

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

ISO 16067-1:2003

Photography -- Spatial resolution measurements of electronic scanners for photographic images -- Part 1: Scanners for reflective media

ISO 3732:2003

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage

ISO 15614-11:2002

Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 11: Electron and laser beam welding

ISO 14624-2:2003

Space systems -- Safety and compatibility of materials -- Part 2: Determination of flammability of electrical-wire insulation and accessory materials

ISO 7638-2:2003

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage

ISO 7638-1:2003

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage

ISO 15609-3:2004

Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 3: Electron beam welding

ISO 12234-2:2001

Electronic still-picture imaging -- Removable memory -- Part 2: TIFF/EP image data format

ISO 10079-1:1999

Medical suction equipment -- Part 1: Electrically powered suction equipment -- Safety requirements

ISO 11446:2004

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 13-pole connectors for vehicles with 12 V nominal supply voltage

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

IEC 80601-2-35:2009

Medical electrical equipment -- Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets pads or mattresses and intended for heating in medical use

ISO/TS 17575-1:2010

Electronic fee collection -- Application interface definition for autonomous systems -- Part 1: Charging

ISO 15031-3:2004

Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 3: Diagnostic connector and related electrical circuits specification and use

ISO 15106-3:2003

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 3: Electrolytic detection sensor method

ISO 14621-1:2003

Space systems -- Electrical electronic and electromechanical (EEE) parts -- Part 1: Parts management

ISO 15584:2001

Small craft -- Inboard petrol engines -- Engine-mounted fuel and electrical components

ISO 3731:2003

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage

ISO 11606:2000

Ships and marine technology -- Marine electromagnetic compasses

ISO 17634:2004

Welding consumables -- Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels -- Classification

ISO/TS 17575-2:2010

Electronic fee collection -- Application interface definition for autonomous systems -- Part 2: Communication and connection to the lower layers

ISO 10770-2:1998

Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves

ISO 13805:1999

Vitreous and porcelain enamels for aluminium -- Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)

ISO 13954:1997

Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

ISO 14343:2009

Welding consumables -- Wire electrodes strip electrodes wires and rods for arc welding of stainless and heat resisting steels -- Classification

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 7176-6:2001

Wheelchairs -- Part 6: Determination of maximum speed acceleration and deceleration of electric wheelchairs

ISO/IEC 10536-3:1996

Identification cards -- Contactless integrated circuit(s) cards -- Part 3: Electronic signals and reset procedures

ISO 7588-3:1998

Road vehicles -- Electrical/electronic switching devices -- Part 3: Microrelays

ISO 10303-210:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly interconnection and packaging design

ISO 9735-7:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 7: Security rules for batch EDI (confidentiality)

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 7588-1:1998

Road vehicles -- Electrical/electronic switching devices -- Part 1: Relays and flashers

IEC 60601-2-12:2001

Medical electrical equipment -- Part 2-12: Particular requirements for the safety of lung ventilators -- Critical care ventilators

ISO 10692-2:2001

Gas cylinders -- Gas cylinder valve connections for use in the micro-electronics industry -- Part 2: Specification and type testing for valve to cylinder connections

ISO 9330-3:1997

Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 13794:1999

Ambient air -- Determination of asbestos fibres -- Indirect-transfer transmission electron microscopy method

ISO 13919-1:1996

Welding -- Electron and laser-beam welded joints -- Guidance on quality levels for imperfections -- Part 1: Steel

ISO 14137:2000

Machine tools -- Test conditions for wire electrical-discharge machines (wire EDM) -- Terminology and testing of the accuracy

ISO 14595:2003

Microbeam analysis -- Electron probe microanalysis -- Guidelines for the specification of certified reference materials (CRMs)

ISO 11212-4:1997

Starch and derived products -- Heavy metals content -- Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization

ISO 13955:1997

Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies

ISO/TR 16764:2003

Lifts escalators and passenger conveyors -- Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility

ISO 14372:2000

Welding consumables -- Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen

ISO 14302:2002

Space systems -- Electromagnetic compatibility requirements

ISO 11212-3:1997

Starch and derived products -- Heavy metals content -- Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 11047:1998

Burning behaviour of textiles and textile products -- VocabularySoil quality -- Determination of cadmium chromium cobalt copper lead manganese nickel and zinc -- Flame and electrothermal atomic absorption spectrometric methods

ISO 11452-5:2002

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline

ISO 14535:2001

Photography -- Room-light loading packages for electronic scanners and image-setting film and paper rolls -- Dimensions and related requirements

ISO/IEC 14543-5-22:2010

Information technology -- Home electronic system (HES) architecture -- Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 -- Application profile -- File profile

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 14594:2003

Microbeam analysis -- Electron probe microanalysis -- Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy

ISO 11452-3:2001

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell

ISO/TR 11955:2008

Hybrid-electric road vehicles -- Guidelines for charge balance measurement

ISO 9944:1990

Plastics -- Phenolic resins -- Determination of electrical conductivity of resin extracts

ISO 10143:1995

Carbonaceous materials for the production of aluminium -- Calcined coke for electrodes -- Determination of the electrical resistivity of granules

ISO 10236:1995

Carbonaceous materials for the production of aluminium -- Green coke and calcined coke for electrodes -- Determination of bulk density (tapped)

ISO 17633:2010

Welding consumables -- Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels -- Classification

ISO 10965:1998

Textile floor coverings -- Determination of electrical resistance

ISO 20898:2008

Industrial trucks -- Electrical requirements

ISO 9458:1988

Passenger cars -- Starter motor electrical connections

ISO 9247:1990

Earth-moving machinery -- Electrical wires and cables -- Principles of identification and marking

ISO 10683:2000

Fasteners -- Non-electrolytically applied zinc flake coatings

ISO 11090-2:1998

Machine tools -- Test conditions for die sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 2: Two column machines (slide-head type and cross-slide table type)

ISO 9851:1990

Continuous mechanical handling equipment -- Overhead electrical monorail conveyors -- Definitions and safety rules

ISO 10656:1996

Electric resistance welding -- Integrated transformers for welding guns

ISO 9735:1988

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules

ISO 7637-2:2011

Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only

ISO 9312:1990

Resistance welding equipment -- Insulated pins for use in electrode back-ups

ISO 9330-2:1997

Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties

ISO 10238:1999

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method

ISO 11090-1:1998

Machine tools -- Test conditions for die sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 1: Single column machines (cross slide table type and fixed table type)

ISO 7176-21:2009

Wheelchairs -- Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters and battery chargers

ISO 9563:1990

Belt drives -- Electrical conductivity of antistatic endless synchronous belts -- Characteristics and test method

ISO 10312:1995

Ambient air -- Determination of asbestos fibres -- Direct transfer transmission electron microscopy method

ISO 10698:1994

Steel -- Determination of antimony content -- Electrothermal atomic absorption spectrometric method

ISO 9534:1989

Road vehicles -- Fuel pump electric connections

ISO 11265:1994

Soil quality -- Determination of the specific electrical conductivity

ISO 9892:1992

Uranium metal uranium dioxide powder and pellets and uranyl nitrate solutions -- Determination of fluorine content -- Fluoride ion selective electrode method

ISO 10359-1:1992

Water quality -- Determination of fluoride -- Part 1: Electrochemical probe method for potable and lightly polluted water

ISO 16700:2004

Microbeam analysis -- Scanning electron microscopy -- Guidelines for calibrating image magnification

ISO 21751:2011

Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test

ISO 6791:1981

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of contents of quinoline-insoluble material

ISO 5763:1989

Photography -- Electronic flash equipment -- Automatic control of exposure

ISO 5867-1:1996

Aircraft -- Electromagnetic relays and contactors -- Part 1: General requirements

ISO 5939:1980

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of water content -- Azeotropic distillation (Dean and Stark) method

ISO 6817:1992

Measurement of conductive liquid flow in closed conduits -- Method using electromagnetic flowmeters

ISO 6858:1982

Aircraft -- Ground support electrical supplies -- General requirements

ISO 5827:1983

Spot welding -- Electrode back-ups and clamps

ISO 6375:1980

Carbonaceous materials for the production of aluminium -- Coke for electrodes -- Sampling

ISO 6376:1980

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of content of toluene-insoluble material

ISO 6999:1983

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of density -- Pycnometric method

ISO 5829:1984

Resistance spot welding -- Electrode adaptors female taper 1 : 10

ISO 6356:2000

Textile floor coverings -- Assessment of static electrical propensity -- Walking test

ISO 5814:1990

Water quality -- Determination of dissolved oxygen -- Electrochemical probe method

ISO 5940:1981

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of softening point by the ring-and-ball method

ISO 5830:1984

Resistance spot welding -- Male electrode caps

ISO 6551:1982

Petroleum liquids and gases -- Fidelity and security of dynamic measurement -- Cabled transmission of electric and/or electronic pulsed data

ISO 12029:2010

Document management -- Machine-readable paper forms -- Optimal design for user friendliness and electronic document management systems (EDMS)

ISO 5843-1:1985

Aerospace construction -- List of equivalent terms -- Part 1: Aerospace electrical equipment

ISO 1976:1975

Zinc alloys -- Determination of copper content -- Electrolytic method

ISO 2678:1985

Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment

ISO/IEC 7816-10:1999

Identification cards -- Integrated circuit(s) cards with contacts -- Part 10: Electronic signals and answer to reset for synchronous cards

ISO 1965:1973

Aluminium terminal ends for crimping to aircraft aluminium electrical cables

ISO 2042:1973

Aircraft electrical circuit diagrams

ISO 2100:1987

Aircraft -- Electrical connectors -- Tests

ISO 2156:1974

Aircraft -- Fire-resisting electrical cables -- Methods of test

ISO 1967:1974

Aircraft -- Fire-resisting electrical cables -- Dimensions conductor resistance and mass

ISO 11174:1996

Workplace air -- Determination of particulate cadmium and cadmium compounds -- Flame and electrothermal atomic absorption spectrometric method

ISO 2401:1972

Covered electrodes -- Determination of the efficiency metal recovery and deposition coefficient

ISO 2574:1994

Aircraft -- Electrical cables -- Identification marking

ISO 1813:1998

Belt drives -- V-ribbed belts joined V-belts and V-belts including wide section belts and hexagonal belts -- Electrical conductivity of antistatic belts: Characteristics and methods of test

ISO 2648:1974

Wool -- Determination of fibre length distribution parameters -- Electronic method

ISO 13606-3:2009

Health informatics -- Electronic health record communication -- Part 3: Reference archetypes and term lists

ISO 1089:1980

Electrode taper fits for spot welding equipment -- Dimensions

ISO 2649:1974

Wool -- Determination of short-term irregularity of linear density of slivers rovings and yarns by means of an electronic evenness tester

ISO 2819:1980

Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion

ISO 1966:1973

Crimped joints for aircraft electrical cables

ISO 9735-2:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 2: Syntax rules specific to batch EDI

ISO 9735-5:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 5: Security rules for batch EDI (authenticity integrity and non-repudiation of origin)

ISO 9735-10:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 10: Syntax service directories

ISO 9735-1:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 1: Syntax rules common to all parts

ISO 9735-3:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 3: Syntax rules specific to interactive EDI

ISO 9735-6:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 6: Secure authentication and acknowledgement message (message type - AUTACK)

ISO 9735-9:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 9: Security key and certificate management message (message type- KEYMAN)

ISO 2155:1974

Aircraft -- Fire-resisting electrical cables -- Performance requirements

ISO 2915:1975

Wool -- Determination of cysteic acid content of wool hydrolysates by paper electrophoresis and colorimetry

ISO 21848:2005

Road vehicles -- Electrical and electronic equipment for a supply voltage of 42 V -- Electrical loads

ISO 1553:1976

Unalloyed copper containing not less than 99 90 % of copper -- Determination of copper content -- Electrolytic method

ISO 2179:1986

Electroplated coatings of tin-nickel alloy -- Specification and test methods

ISO 2194:1991

Industrial screens -- Woven wire cloth perforated plate and electroformed sheet -- Designation and nominal sizes of openings

ISO/TS 15000-1:2004

Electronic business eXtensible Markup Language (ebXML) -- Part 1: Collaboration-protocol profile and agreement specification (ebCPP)

ISO 1949:1987

Aircraft -- Electrical connectors -- Design requirements

ISO 2093:1986

Electroplated coatings of tin -- Specification and test methods

ISO 2315:1980

Aircraft -- Two- and four-pole sealed electromagnetic relays 2 A and 3 A -- Clearance and fixing dimensions

ISO 2720:1974

Photography -- General purpose photographic exposure meters (photoelectric type) -- Guide to product specification

ISO 1554:1976

Wrought and cast copper alloys -- Determination of copper content -- Electrolytic method

ISO 2361:1982

Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method

ISO 2827:1988

Photography -- Electronic flash equipment -- Determination of light output and performance

ISO 2969:1987

Cinematography -- B-chain electro-acoustic response of motion-picture control rooms and indoor theatres -- Specifications and measurements

ISO 17899:2004

Ships and marine technology -- Marine electric window wipers

ISO 17933:2000

GEDI -- Generic Electronic Document Interchange

ISO/TS 17574:2009

Electronic fee collection - Guidelines for security protection profiles

ISO 17894:2005

Ships and marine technology -- Computer applications -- General principles for the development and use of programmable electronic systems in marine applications

ISO 12653-1:2000

Electronic imaging -- Test target for the black-and-white scanning of office documents -- Part 1: Characteristics

ISO 12979:1999

Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of C/H ratio in the quinoline-insoluble fraction

ISO 12653-2:2000

Electronic imaging -- Test target for the black-and-white scanning of office documents -- Part 2: Method of use

ISO 18175:2004

Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments

IEC 80000-6:2008

Quantities and units -- Part 6: Electromagnetism

ISO 16147:2002

Small craft -- Inboard diesel engines -- Engine-mounted fuel and electrical components

ISO 3783:2006

Paper and board -- Determination of resistance to picking -- Accelerated speed method using the IGT-type tester (electric model)

ISO 9455-17:2002

Soft soldering fluxes -- Test methods -- Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues

ISO 18275:2005

Welding consumables -- Covered electrodes for manual metal arc welding of high-strength steels -- Classification

ISO 18276:2005

Welding consumables -- Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels -- Classification

ISO 10692-1:2001

Gas cylinders -- Gas cylinder valve connections for use in the micro-electronics industry -- Part 1: Outlet connections

ISO 10382:2002

Soil quality -- Determination of organochlorine pesticides and polychlorinated biphenyls -- Gas-chromatographic method with electron capture detection

ISO 9213:2004

Measurement of total discharge in open channels -- Electromagnetic method using a full-channel-width coil

ISO 15254:2009

Ophthalmic optics and instruments -- Electro-optical devices for enhancing low vision

IEC 60601-2-13:2003

Medical electrical equipment -- Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems

ISO/IEC 18012-1:2004

Information technology -- Home Electronic System -- Guidelines for product interoperability -- Part 1: Introduction

ISO 12977:1999

Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of volatile matter content

ISO 17470:2004

Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry

ISO 11748-2:2001

Road vehicles -- Technical documentation of electrical and electronic systems -- Part 2: Documentation agreement

ISO 1071:2003

Welding consumables - Covered electrodes wires rods and tubular cored electrodes for fusion welding of cast iron - Classification

ISO 17475:2005

Corrosion of metals and alloys -- Electrochemical test methods -- Guidelines for conducting potentiostatic and potentiodynamic polarization measurements

ISO 11933-5:2001

Components for containment enclosures -- Part 5: Penetrations for electrical and fluid circuits

ISO/IEC 10021-9:1999

Information technology -- Message Handling Systems (MHS): Electronic Data Interchange Messaging System

ISO 18273:2004

Welding consumables -- Wire electrodes wires and rods for welding of aluminium and aluminium alloys -- Classification

ISO/TS 14907-1:2010

Electronic fee collection -- Test procedures for user and fixed equipment -- Part 1: Description of test procedures

ISO 2360:2003

Non-conductive coatings on non-magnetic electrically conductive basis materials -- Measurement of coating thickness -- Amplitude-sensitive eddy-current method

ISO 17973:2002

Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis

ISO 17974:2002

Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis

ISO 11748-3:2002

Road vehicles -- Technical documentation of electrical and electronic systems -- Part 3: Application example

ISO 17559:2003

Hydraulic fluid power -- Electrically controlled hydraulic pumps -- Test methods to determine performance characteristics

ISO 11748-1:2001

Road vehicles -- Technical documentation of electrical and electronic systems -- Part 1: Content of exchanged documents

ISO 15217:2000

Fluid power systems and components -- 16 mm square electrical connector with earth contact -- Characteristics and requirements

ISO 10133:2000

Small craft -- Electrical systems -- Extra-low-voltage d.c. installations

ISO 14744-4:2000

Welding -- Acceptance inspection of electron beam welding machines -- Part 4: Measurement of welding speed

ISO 15471:2004

Surface chemical analysis -- Auger electron spectroscopy -- Description of selected instrumental performance parameters

ISO 80601-2-61:2011

Medical electrical equipment -- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment

ISO 4042:1999

Fasteners -- Electroplated coatings

ISO 8518:2001

Workplace air -- Determination of particulate lead and lead compounds -- Flame or electrothermal atomic absorption spectrometric method

ISO 24534-1:2010

Automatic vehicle and equipment identification -- Electronic registration identification (ERI) for vehicles -- Part 1: Architecture

ISO 24534-2:2010

Automatic vehicle and equipment identification -- Electronic registration identification (ERI) for vehicles -- Part 2: Operational requirements

ISO 15720:2001

Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography

ISO 11788-2:2000

Electronic data interchange between information systems in agriculture -- Agricultural data element dictionary -- Part 2: Dairy farming

ISO 5183-1:1998

Resistance welding equipment -- Electrode adaptors male taper 1:10 -- Part 1: Conical fixing taper 1:10

ISO/IEC TR 15067-2:1997

Information technology -- Home Electronic Systems (HES) application model -- Part 2: Lighting model for HES

ISO 15170-2:2001

Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 2: Tests and requirements

ISO 15724:2001

Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method

ISO 15170-1:2001

Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 1: Dimensions and classes of application

ISO 14744-2:2000

Welding -- Acceptance inspection of electron beam welding machines -- Part 2: Measurement of accelerating voltage characteristics

ISO 15730:2000

Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel

ISO 5599-1:2001

Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector

ISO 24534-4:2010

Automatic vehicle and equipment identification -- Electronic registration identification (ERI) for vehicles -- Part 4: Secure communications using asymmetrical techniques

ISO 13297:2000

Small craft -- Electrical systems -- Alternating current installations

ISO 14744-5:2000

Welding -- Acceptance inspection of electron beam welding machines -- Part 5: Measurement of run-out accuracy

ISO 14982:1998

Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria

ISO 13919-2:2001

Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys

ISO 669:2000

Resistance welding -- Resistance welding equipment -- Mechanical and electrical requirements

ISO/IEC 15045-1:2004

Information technology -- Home Electronic Systems (HES) gateway -- Part 1: A Residential Gateway model for HES

ISO/TR 15349-1:1998

Road vehicles -- Safety glazing materials -- VocabularyUnalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)

ISO/TR 15349-3:1998

Unalloyed steel -- Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)

ISO/TS 12813:2009

Electronic fee collection -- Compliance check communication for autonomous systems

ISO 6297:1997

Petroleum products -- Aviation and distillate fuels -- Determination of electrical conductivity

ISO 6469-3:2001

Electric road vehicles -- Safety specifications -- Part 3: Protection of persons against electric hazards

ISO 5599-2:2001

Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector

ISO 14744-3:2000

Welding -- Acceptance inspection of electron beam welding machines -- Part 3: Measurement of beam current characteristics

ISO 11788-3:2000

Electronic data interchange between information systems in agriculture -- Agricultural data element dictionary -- Part 3: Pig farming

ISO 14744-6:2000

Welding -- Acceptance inspection of electron beam welding machines -- Part 6: Measurement of stability of spot position

ISO 15470:2004

Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters

ISO 15407-1:2000

Pneumatic fluid power -- Five-port directional control valves sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector

ISO 1680:1999

Acoustics -- Test code for the measurement of airborne noise emitted by rotating electrical machines

ISO/IEC TR 15044:2000

Information technology -- Terminology for the Home Electronic System (HES)

ISO 9735-8:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 8: Associated data in EDI

ISO 11950:1995

Cold-reduced electrolytic chromium/chromium oxide-coated steel

ISO 7507-5:2000

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 5: External electro-optical distance-ranging method

ISO 11788-1:1997

Electronic data interchange between information systems in agriculture -- Agricultural data element dictionary -- Part 1: General description

ISO 6952:1994

Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements

ISO/IEC 11518-1:1995

Information technology -- High-Performance Parallel Interface -- Part 1: Mechanical electrical and signalling protocol specification (HIPPI-PH)

ISO 12384:2010

Aerospace -- Requirements for digital equipment for measurements of aircraft electrical power characteristics

ISO 2376:2010

Anodizing of aluminium and its alloys -- Determination of electric breakdown potential

ISO 3580:2010

Welding consumables -- Covered electrodes for manual metal arc welding of creep-resisting steels -- Classification

ISO 11438-4:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 4: Determination of tin content

ISO/IEC 2382-32:1999

Information technology -- Vocabulary -- Part 32: Electronic Mail

ISO 24534-3:2010

Automatic vehicle and equipment identification -- Electronic registration identification (ERI) for vehicles -- Part 3: Vehicle data

ISO 1044:1993

Industrial trucks -- Lead-acid traction batteries for electric trucks -- Preferred voltages

ISO 8092-1:1996

Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 1: Tabs for single-pole connections -- Dimensions and specific requirements

ISO 11949:1995

Cold-reduced electrolytic tinplate

ISO 11951:1995

Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel

ISO 15407-2:2003

Pneumatic fluid power -- Five-port directional control valves sizes 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector

ISO 13476:1997

Road vehicles -- Ignition coils -- Electrical characteristics and test methods

ISO 4400:1994

Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements

ISO 11438-1:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 1: General requirements and sample dissolution

ISO 6518-2:1995

Road vehicles -- Ignition systems -- Part 2: Electrical performance and function test methods

ISO 8092-4:1997

Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 4: Pins for single- and multi-pole connections -- Dimensions and specific requirements

ISO 11438-7:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 7: Determination of silver content

ISO 22199:2009

Electromagnetic compatibility -- Product family standard for lifts escalators and moving walks -- Emission

ISO 11451-3:1994

Road vehicles -- Electrical disturbances by narrowband radiated electromagnetic energy -- Vehicle test methods -- Part 3: On-board transmitter simulation

ISO 11438-2:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 2: Determination of lead content

ISO 11438-5:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 5: Determination of tellurium content

IEC 948:1988

Numeric keyboard for home electronic systems (HES)

ISO 11438-3:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 3: Determination of antimony content

ISO 11438-6:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 6: Determination of thallium content

ISO 11438-8:1993

Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 8: Determination of indium content

ISO 11437-1:1994

Nickel alloys -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 1: General requirements and sample dissolution

ISO 12169:1996

Nickel oxide -- Determination of nickel content -- Electrolytic deposition method

ISO 11498:1997

Dental handpieces -- Dental low-voltage electrical motors

ISO 11437-2:1994

Nickel alloys -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 2: Determination of lead content

ISO 12083:1994

Information and documentation -- Electronic manuscript preparation and markup

ISO 8846:1990

Small craft -- Electrical devices -- Protection against ignition of surrounding flammable gases

ISO 9055:1988

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by the bomb method

ISO 7832:1987

Cinematography -- Photoelectric output factor of photographic-type audio-level test films -- Measurement and calibration

ISO 8085-2:2001

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 2: Spigot fittings for butt fusion for socket fusion using heated tools and for use with electrofusion fittings

ISO 8715:2001

Electric road vehicles -- Road operating characteristics

ISO 7588-2:1998

Road vehicles -- Electrical/electronic switching devices -- Part 2: Electronic devices

ISO 8085-3:2001

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 3: Electrofusion fittings

ISO 8006:1985

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of ash

ISO 8093:1985

Road vehicles -- Diagnostic testing of electronic systems

ISO 8220:1986

Aluminium oxide primarily used for the production of aluminium -- Determination of the fine particle size distribution (less than 60 mu/m) -- Method using electroformed sieves

ISO 8430-1:1988

Resistance spot welding -- Electrode holders -- Part 1: Taper fixing 1:10

ISO 7523:1985

Nickel -- Determination of silver arsenic bismuth cadmium lead antimony selenium tin tellurium and thallium contents -- Electrothermal atomic absorption spectrometric method

ISO 7587:1986

Electroplated coatings of tin-lead alloys -- Specification and test methods

ISO 8818:1988

Leisure accommodation vehicles -- Caravans -- 12 V direct current extra low voltage electrical installations

ISO 8581:1994

Photography -- Electronic flash equipment -- Connectors to synchro-cord

ISO 8092-3:1996

Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 3: Tabs for multi-pole connections -- Dimensions and specific requirements

ISO 8430-2:1988

Resistance spot welding -- Electrode holders -- Part 2: Morse taper fixing

ISO 8003:1985

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity

ISO 9006:1994

Uranium metal and uranium dioxide powder and pellets -- Determination of nitrogen content -- Method using ammonia-sensing electrode

ISO 7888:1985

Water quality -- Determination of electrical conductivity

ISO 8430-3:1988

Resistance spot welding -- Electrode holders -- Part 3: Parallel shank fixing for end thrust

ISO 8815:1994

Aircraft -- Electrical cables and cable harnesses -- Vocabulary

ISO 4539:1980

Electrodeposited chromium coatings -- Electrolytic corrosion testing (EC test)

ISO/IEC 14543-3-1:2006

Information technology -- Home Electronic Systems (HES) Architecture -- Part 3-1: Communication layers -- Application layer for network based control of HES Class 1

ISO 4524-2:2000

Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests

ISO 4524-3:1985

Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 3: Electrographic tests for porosity

ISO 5066-2:1986

Aircraft -- Hermetically sealed monostable electrical relays 2A and 3A -- Part 2: Type approval tests

ISO 23274:2007

Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption measurements -- Non-externally chargeable vehicles

ISO 4520:1981

Chromate conversion coatings on electroplated zinc and cadmium coatings

ISO 11148-3:2010

Hand-held non-electric power tools -- Safety requirements -- Part 3: Drills and tappers

ISO/IEC 14543-3-2:2006

Information technology -- Home Electronic Systems (HES) Architecture -- Part 3-2: Communication layers -- Transport network and general parts of data link layer for network based control of HES Class 1

ISO 4519:1980

Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes

ISO 4009:2000

Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers

ISO 4694:1987

Iron ores -- Determination of fluorine content -- Ion-selective electrode method

ISO 25981:2008

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage

ISO/TR 15801:2009

Document management -- Information stored electronically -- Recommendations for trustworthiness and reliability

ISO 5019-4:1988

Refractory bricks -- Dimensions -- Part 4: Dome bricks for electric arc furnace roofs

ISO 5066-1:1986

Aircraft -- Hermetically sealed monostable electrical relays 2A and 3A -- Part 1: Operating characteristics and test conditions

ISO 5184:1979

Straight resistance spot welding electrodes

ISO 3310-3:1990

Test sieves -- Technical requirements and testing -- Part 3: Test sieves of electroformed sheets

ISO 8981:1993

Wheat -- Identification of varieties by electrophoresis

ISO 13766:2006

Earth-moving machinery -- Electromagnetic compatibility

ISO 4524-6:1988

Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 6: Determination of the presence of residual salts

ISO/TR 12343:1997

Road vehicles -- Symbols for electrotechnical diagrams

ISO 796:1973

Aluminium alloys -- Determination of copper -- Electrolytic method

ISO 11862:1993

Earth-moving machinery -- Auxiliary starting aid electrical connector

ISO 461-2:1985

Aircraft -- Connectors for ground electrical supplies -- Part 2: Dimensions

ISO 268:1980

Aircraft -- Mechanical and electromechanical indicators -- General requirements

ISO 9097:1991

Small craft -- Electric fans

ISO 5344:2004

Electrodynamic vibration generating systems -- Performance characteristics

ISO 13359:1998

Measurement of conductive liquid flow in closed conduits -- Flanged electromagnetic flowmeters -- Overall length

ISO 9104:1991

Measurement of fluid flow in closed conduits -- Methods of evaluating the performance of electromagnetic flow-meters for liquids

ISO 9220:1988

Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method

ISO/TR 12654:1997

Electronic imaging -- Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence on WORM optical disk

ISO 3839:1996

Petroleum products -- Determination of bromine number of distillates and aliphatic olefins -- Electrometric method

ISO/TR 12037:1998

Electronic imaging -- Recommendations for the expungement of information recorded on write-once optical media

ISO 10807:1994

Pipework -- Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres

ISO 12374:1995

Agricultural irrigation -- Wiring and equipment for electrically driven or controlled irrigation machines

ISO 7503-3:1996

Evaluation of surface contamination -- Part 3: Isomeric transition and electron capture emitters low energy beta-emitters (E bOtamax less than 0 15 MeV)

ISO 9735-4:2002

Electronic data interchange for administration commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4 Syntax release number: 1) -- Part 4: Syntax and service report message for batch EDI (message type -- CONTRL)

ISO/TR 12369:1994

Agricultural tractors and machinery -- Electrical power transmission connectors

ISO 105-Z08:1995

Textiles -- Tests for colour fastness -- Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes

ISO 565:1990

Test sieves -- Metal wire cloth perforated metal plate and electroformed sheet -- Nominal sizes of openings

IEC 796-1:1990

Microprocessor system bus -- 8-bit and 16-bit data (MULTIBUS I) -- Part 1: Functional description with electrical and timing specifications

ISO 12651:1999

Electronic imaging -- Vocabulary

ISO 7176-10:2008

Wheelchairs -- Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs

ISO 16175-3:2010

Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 3: Guidelines and functional requirements for records in business systems